• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.637-643
• /
• 2022

Uranium and plutonium are required to be accounted in spent fuel head-end and major recovery area in pyro-process for safeguards purpose. The possibility of neutron resonance technique, as a nondestructive analysis, was simulated on isotopic fissile analysis for large scale process. Neutron resonance technique has advantage to distinguish uranium from plutonium directly in mixture. Simulation was performed on U235 and Pu239 assay in spent fuel and for scoping examination of assembly type. The resonance energies were determined for U235 and Pu239. The linearity in the neutron transmission was examined for the selected resonance energies. In addition, the limit for detection was examined by changing sample density, thickness and content for actual application. Several factors were proposed for neutron production and the moderated neutron source was simulated for effective and efficient transmission measurement. From the simulation results, neutron resonance technique is promising to analyze U235 and Pu239 for spent fuel assembly. An accurate fissile assay will contribute to an increased safeguards for the pyro-processing system and international credibility on the reuse of fissile materials in the fuel cycle.

• 한국방사선학회논문지
• /
• 제1권2호
• /
• pp.31-35
• /
• 2007

Energy calibration is important to identify accurate neutron capture resonance energy in the neutron TOF (Time-of-Flight) experiment. In present study, the accurate neutron capture resonance energies of natural Sm were measured by using a 46-MeV electron linear accelerator (linac) at the Research Reactor Institute, Kyoto University(KURRI). The BGO spectrometer were adopted for measurement the prompt capture gamma-ray of the sample. To obtain energy calibration curve, resonance energy of a gold sample used as standard resonance energy Mughabghab's data (From neutron resonance parameters data). Previous data (by Mughabghab) of natural Sm sample have been compared with the present result.

• 한국자기공명학회논문지
• /
• 제12권2호
• /
• pp.74-80
• /
• 2008

The local structure of defects in undoped, Si-doped, and neutron irradiated free standing GaN bulk crystals, grown by hydride vapor phase epitaxy, has been investigated by employing electron magnetic resonance(EMR), Raman scattering and cathodoluminescence. The GaN samples were irradiated to a dose of $2{\times}10^{17}$ neutrons in an atomic reactor at Korea Atomic Energy Research Institute. There was no appreciable change in the Raman spectra for undoped GaN samples before and after neutron irradiation. However, a forbidden transition, $A_1$(TO) mode, appeared for a neutron irradiated Si-doped GaN crystal. Cathodoluminescence spectrum for the neutron irradiated Si-doped GaN crystal became much broader or was much more broadened than that for the unirradiated one. The observed EMR center with the g value of 1.952 in a neutron irradiated Si-doped GaN may be assigned to a Si-related complex donor.

• 한국방사선학회논문지
• /
• 제3권3호
• /
• pp.23-25
• /
• 2009

Gd-157 material has very large neutron capture cross section in the thermal region. So it is very useful to shield material for thermal neutrons. Futhermore, in the neutron capture experiment and calculation, the neutron absorption and scattering are very important. Especially these effects are conspicuous in the resonance energy region and below the thermal energy region. In the case of very narrow resonance, the effect of scattering is to be more considerable factor. In the present study, we obtained energy dependent neutron absorption ratios of natural indium in energy region from 0.003 to 100 keV by MCNP-4B Code. The coefficients for neutron absorption was calculated for circular type and 1 mm thickness. In the lower energy region, neutron absorption is larger than higher region, because of large capture cross section (1/v). Furthermore it seems very different neutron absorption in the large resonance energy region. These results are very useful to decide the thickness of sample and shielding materials.

• 방사성폐기물학회지
• /
• 제21권2호
• /
• pp.235-246
• /
• 2023

Neutron resonance transmission technique was applied for assaying isotopic fissile materials produced in the pyro-process. In each process of the pyro-process, a different composition of the fissile material is produced. Simulation was basically performed on ²³⁵U and ²³⁹Pu assay for TRU-RE product, hull waste, and uranium addition. The resonance energies were evaluated for uranium and plutonium in the simulation, and the linearity in the detection response was examined on the fissile content variation. The linear resonance energies were determined for the analysis of ²³⁵U and ²³⁹Pu on the different fissile materials. For enriched TRU-RE assay, the sample condition was suggested; The sample density, content, and thickness are the key factors to obtain accurate fissile content. The detection signal is discriminated for uranium and plutonium in neutron resonance technique. The transmitted signal for fissile resonance has a direct relation with the content of fissile. The simulation results indicated that the neutron resonance technique is promising to analyze ²³⁵U and ²³⁹Pu for various types of the pyro-process material. An accurate fissile assay will contribute toward safeguarding the pyro-processing system.

• Nuclear Engineering and Technology
• /
• 제33권1호
• /
• pp.46-61
• /
• 2001

The neutron cross sections of $^{160}$ Dy, $^{161}$ Dy, $^{162}$ Dy, $^{l63}$Dy, and $^{164}$ Dy have been evaluated in the resonance region of which upper energy is set to several tens of keV. The cross sections are formulated with resonance parameters in the energy region under consideration. In the resolved resonance region, the positive-energy resonance parameters were adopted from the BNL compilation published in 1984 with slight, if any, modifications. A bound level resonance for each isotope except $^{162}$ Dy was invoked to reproduce the reference 2200 m/s cross sections and the bound coherent scattering length. Subsequently, the statistical behavior of the resolved resonance parameters was analyzed, and thus obtained s-wave average parameters were adopted in the unresolved resonance region. In addition, recent measurements of the capture cross sections in the unresolved region were taken into account in adjusting the average resonance parameters for high orbital angular momentum resonances. The present evaluation resulted in large improvements in the cross sections over the ENDF/B-Vl release 6.6.

• 한국방사선학회논문지
• /
• 제8권6호
• /
• pp.287-292
• /
• 2014

본 연구는 자연 속에 미량(존재비: 0.012 %)으로 존재하는 $^{180}Ta$의 중성자포획 공명에 대하여 포획단면적의 계산치와 측정치를 비교하여 분석하였다. 일반적으로 중성자 공명은 Breit-Wigner식으로 정의되며, 식에는 공명에너지를 중심으로 공명의 폭을 결정하는 다양한 인자들로 구성되어 있다. 그러나 $^{180}Ta$의 경우 중성자포획단면적과 공명에 대한 정보가 잘 알려져 있지 않고 실험적으로도 측정되어진 예가 현재까지는 없는 것이 현실이다. 따라서 본 실험에서는 천연 Ta속에 포함되어진 $^{180}Ta$에 의한 중성자 포획에 의해 발생되는 감마선을 관측하여 $^{180}Ta$의 공명을 분석하고 Mughabghab에 의해서 계산되어진 공명인자를 사용하여 1 eV이하의 에너지에 대한 중성자포획단면적을 계산하고 비교분석하였다. 측정을 위해서 교토대학원자로 실험소의 46-MeV 전자선형가속기를 이용하여 중성자 TOF 방법으로, 에너지 영역 0.003 eV에서 10 eV에 걸쳐 측정하였다. 측정을 위해서는 12개의 $Bi_4Ge_3O_{12}(BGO)$섬광체로 구성된 전에너지 흡수검출장치로 $^{180}Ta(n,{\gamma})^{181}Ta$ 반응으로부터 나오는 즉발감마선을 측정하였다.

• 한국방사선학회논문지
• /
• 제2권3호
• /
• pp.33-35
• /
• 2008

In the neutron capture experiment and calculation, the neutron absorption and scattering are very important. Especially these effects are conspicuous in the resonance energy region and below the thermal energy region. In the present study, we obtained energy dependent neutron absorption ratios of natural rhodium in energy region from 0.003 to 100 eV by MCNP-4B Code. The coefficients for neutron absorption was calculated for several types of thickness. In the lower energy region, neutron absorption is larger than higher region, because of large capture cross section (1/v). Furthermore it seems very different neutron absorption in the large resonance energy region. These results are very useful to decide the thickness of sample and shielding materials.

• 한국방사선학회논문지
• /
• 제7권3호
• /
• pp.245-249
• /
• 2013

천연 탄탈의 중성자포획에 의한 공명에너지를 측정하기 위하여 교토대학의 원자로연구소의 46-MeV 전자선형가속기의 광핵반응에서 발생하는 중성자를 이용하였다. 중성자포획에서 발생되는 즉발감마선을 BGO($Bi_4Ge_3O_{12}$)섬광검출장치로 측정하였다. 검출장치는 탄탈 시료에서 발생되는 즉발감마선을 기하학적으로 모두 측정하도록 만들어져 있으며 측정되어진 전기적 신호를 탄탈의 중성자 공명에너지 동정하는 스펙트럼구성에 사용하였다. 연구에서 사용되어진 중성자의 에너지는 1 ~ 200 eV 영역에 대하여 각각의 공명에너지를 분석하였다. 중성자에너지 측정은 중성자 비행시간법(TOF: Time-of-Flight)을 통하여 측정하였다. 광핵반응을 통한 중성자발생에서는 고에너지영역에서 강한 제동복사선이 발생하므로 수 keV영역 이하 영역의 중성자에너지에 대해서만 중성자공명을 측정하였다. 얻어진 Ta에 대한 중성자 포획 공명에너지 측정결과는 이전의 실험에 의한 측정 결과들 및 ENDF/B-VI와 Mughabghab의 평가된 값들과 비교 및 검토를 하였다. 측정되어진 공명들은 4.28 eV에서 거대 공명들을 측정하였고 그 이상의 에너지 영역의 다른 공명들도 이론에 의해서 계산되어진 값들과 비교하였다. 144.3 eV를 제외한 공명들은 평가값들과 거의 일치하는 경향을 보였다.

• 한국방사선학회논문지
• /
• 제6권5호
• /
• pp.403-408
• /
• 2012

본 연구는 천연 인듐의 중성자폭획 후에 발생된 감마선을 12개의 BGO($Bi_4Ge_3O_{12}$) 섬광검출기로 구성된 검출장치를 이용하여 즉발감마선을 측정하여 중성자공명에 의해서 발생된 감마선을 분석하여 중성자의 에너지 1 ~ 300 eV 영역에 대하여 공명에너지를 분석하였다. 사용되어진 검출장치는 시료에서 발생된 즉발감마선에 대하여 모든 감마선을 측정할 수 있는 기하학적인 구조로 만들어졌다. 중성자원으로는 교토대학의 원자로연구소의 46-MeV 전자선형가속기의 광핵반응에서 발생하는 중성자를 이용하였다. 중성자발생원으로부터 검출기까지의 거리가 $12.7{\pm}0.02m$이므로 광핵반응에서 발생하는 강한 X선의 영향을 고려하여 수 keV영역이하의 중성자에너지에 대하여 중성자공명을 측정하였다. 측정되어진 공명들은 1 eV이상의 에너지 영역에서 거대 공명들을 측정하였고 이들 공명들은 이론에서 알려진 값들과 비교하였다. 본 연구를 통하여 기존에 알려진 거대 공명의 에너지를 확인하였고, 100 eV이상의 에너지 영역에서의 공명에너지들에 대한 평가에 의한 이론값들이 실제로 존재하는 공명임을 실험적으로 확인하였다. 1 keV 이상의 영역에 대하여는 공명이 연속적인 구조를 보이고 있음을 실험적으로 확인했으며 공명에 대하여 통계적인 평가가 있어야함을 알았다. 91.49 eV 공명은 본 연구를 통하여 처음 발견되어진 공명이라 볼 수 있다.