• Asian-Australasian Journal of Animal Sciences
• /
• 제3권4호
• /
• pp.299-303
• /
• 1990

Twenty-four Harnai lambs 6 to 7 month old, weighing $16{\pm}2kg$ were used in a completely randomized design in growth and digestibility trials to study fourwing saltbush ratio supplemented with cotton seed cake. The animal were divided at random into three groups of 8 animals each. Three iso-nitrogenous (10.5% CP) experimental rations (1, 2 and 3) containing wheat straw + lucerne hay (24:76); fourwing saltbush (Atriplex canescens) + cotton seed cake (71:29); and wheat straw + cottonseed cake (41:59); respectively, were allotted to each group randomly. All the animals were taken out for grazing in a dormant native range for about 3 hours in the afternoon during the growth trial. The growth trial lasted for 8 weeks followed by a digestibility trial. At the end of 8 weeks lambs on ration 3 had gained significantly (p<0.10) more weight compared to those on rations 1 and 2 which maintained their body weight. The crude protein digestibility of the fourwing saltbush based ration was comparable with the other two treatments (71 vs 70 and 71%). However, the digestibility of dry matter (41%), acid detergent fibre (13%) and neutral detergent fibre (22%) of this ration was significantly lower (p<0.10) than the other two diets. The results suggest that lambs can be maintained on fourwing saltbush during winter without significant loss in body weight with 30% extra protein concentrate supplementation.

• 한국전산구조공학회논문집
• /
• 제25권6호
• /
• pp.541-548
• /
• 2012

중공슬래브 시스템은 슬래브 두께가 증가해도 자중은 크게 증가하지 않고, 일반슬래브에 비해서 휨성능이 크게 저하되지 않는 장점이 있다. 이러한 경제적인 건물 설계 및 친환경 구조물 구현을 가능하게 하는 시스템에도 불구하고 중공슬래브의 활용도는 현재로서는 낮다고 할 수 있다. 특히 국내의 건축분야에 있어서는 매우 낮은 편이다. 이러한 현 상황의 가장 큰 이유는 중공슬래브의 적용을 위한 구조 해석 및 설계방법이 일반화되어 있지 않다는 것이다. 본 연구에서는 실질적인 압축영역을 고려하기 위해 가정한 중공 단면형상에서 중립축 위치에 따른 압축응력블럭의 체적으로 휨강도 산정식을 제시하였다. 기존 중공부 상부만을 압축영역으로 고려한 휨강도 산정방법은 가장 보수적인 방법으로 판단되며 2개의 대체단면을 설정하여 휨내력을 산정하는 것이 더 실질적인 방법으로 판단된다.

• The Journal of Korean Physical Therapy
• /
• 제15권3호
• /
• pp.346-360
• /
• 2003

The purpose of this study was to evaluate effects of education and stabilization exercise of lumbar neutral zone is range of motion and pain of lumbar spine on the with non-specific low back pain. And the randomly selected each twenty patients out of the forty non-specific low back pain patients were classified as an stabilization exercise group and the other the patients were in a control group. stabilization exercise group in non-specific low back pain patients participated in exercise program of Richardson & Jull (1995) four week from October 1st, 2002 to February 28st, 2003 in Daegu 00 hospital. The conclusion were as follows: 1. After 4 weeks of therapy, Visual analogue scale in stabilization exercise group and control group with non-specific low back pain patients were not significantly decreased(p>.05). 2. Remodified Schober test in range of motion lumbar spine of stabilization exercise group and control group with non-specific low back pain patients were significantly increased(p<.05). 3. Finger-to-Floor test in range of motion whole spine of stabilization exercise group and control group with non-specific low back pain patients were not significantly increased(p>.05). 4. Visual analogue scale, Remodified Schober test and Finger-to-Floor test in pre and post treatment of stabilization exercise group and control group with non-specific low back pain patients were significant different(p<.05). 5. Visual analogue scale, Remodified Schober test and Finger-to-Floor test in stabilization exercise group and control group with non-specific low back pain patients were not significant different(p>.05).

• Journal of Mechanical Science and Technology
• /
• 제18권6호
• /
• pp.972-978
• /
• 2004

Forward slip is an important parameter often used in rolling-speed control models for tandem hot strip rolling mills. In a hot strip mill, on-line measurement of strip speed is inherently very difficult. Therefore, for the set-up of the finishing mill, a forward slip model is used to calculate the strip speed from roll circumferential velocity at each mill stand. Due to its complexity, most previous researches have used semi-empirical methods in determining values for the forward slip. Although these investigations may be useful in process design and control, they do not have a theoretical basis. In the present study, a better forward slip model has been developed, which provides for a better set-up and more precise control of the mill. Factors such as neutral point, friction coefficient, width spread, shape of deformation zone in the roll bite are incorporated into the model. Implementation of the new forward slip model for the control of a 7-stand hot strip tandem rolling mill shows significant improvement in roll speed set-up accuracy.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.403-408
• /
• 2003

The objective of this study is to understand the variables affected the confinement for the transverse reinforcement of the reinforced concrete structural walls with the T-shaped cross section subjected to cyclic lateral loads. The structural performance of T-shaped walls was advanced by the transverse reinforcement which restrained the concrete subjected to compressive stress. If the arrangement of transverse reinforcement was not suitable for the confinement, T-shaped walls happened the brittle failure by web crushing or bucking of vertical reinforcement at the compression zone. It is necessary to confine transverse reinforcement in order to prevent the these failure. But the location of neutral axis and the magnitude of ultimate strain vary according to the section shape, a ratio of axial load, a ratio of wall cross sectional area to the floor-plan area, an aspect ratio and the reinforcement ratio. Therefore, the objective of this research is to grasp the location of neutral axis and the range which needs for the confinement of transverse reinforcement through the results of the sectional analysis which varies the ratio of axial load and the ratio of vertical reinforcement.

• 한국정밀공학회지
• /
• 제14권2호
• /
• pp.102-112
• /
• 1997

This paper describes the method that can construct kinematically admissible velocity fields for forging of gear-like components which have tooth shape around the cylinder. The kinematically admissible velo- city fields for the various gear-like components, involute spur gear, trapezoidal spline, square spline, ser- ration and trochoidal gear, were constructed by pilling up the velocity components according to the shape of tooth and billet. The billets, of hollow and solid, were Al 2218 and 2024. To verify the method, the analyses and experiments were carried out and compared with each other. For analyses, the half pitches of com- ponents were divided into several deformation regions based on their tooth profile. A neutral surface was used to represent the inner flow of material during forging. Its location varied with the energy optimazation and its contour varied with the number of teeth. In experiment, the contour of material filling up the tooth zone is hyperbolic curve caused by the frictional drag on the interface of die-wall/workpiece but, in the analysis, it is an arc which retains the same contour during all forging operation.

• 한국실내디자인학회논문집
• /
• 제24권2호
• /
• pp.125-133
• /
• 2015

Gaze induction characteristics in space vary depending on characteristics of spatial components and display. This study analyzed dominant eye-fixation characteristics of three zones of department store space. Eye-fixation characteristics depending on spatial components and positional relationship can be defined as follows. First, [**.jpg] was used as an extension in the process of storing the image photographed during image data processing for analysis in pixels and due to compressed storage of image data, the image produced with a clear boundary was stored in neutral colors. To remove this problem, the image used in operation was re-processed in black and white and stored in the [**.bmp] format with large capability, at the same time. As the result, the effort caused by unnecessary colors in the program operation process was corrected. Second, the gaze ratio to space area can be indicated as a strength of each gaze zone and when analyzing the gaze strength of the three zones, the left store was a zone with a "little strong" gaze strength of "102.8", the middle space was a zone with an "extremely weak" gaze strength of "89.6" and the right store was a zone with an "extremely strong" gaze strength of "117.2". Third, the IV section had a strong strength of gaze on the middle space and the right store and the V section showed a markedly strong strength of gaze on the left and right stores. This tendency was the same as the VI section with the strongest gaze strength and the right store had a little strong gaze strength than the left store.

• 대한토목학회논문집
• /
• 제43권5호
• /
• pp.675-687
• /
• 2023

한반도 비무장지대에 인접한 접경지역은 DMZ(DemilitarizedZone) 그린평화 지대화를 위한 그린데탕트(GreenDétent) 실천무대로 주목 받고있다. 본논문은 접경지역에 계획된 생태·환경 분야 산업·인프라 사업의 복합적 성격을 판단 할 수있는 항목으로 구성된 프로슈밍지표(Prosuming-index)를 제안하고, 이 를 통해 그린데탕트 실천 대상지로서의 잠재력과 방향성을 시각화 하였다. 그 결과, 접경 지역중 인천·강화 지역은 '물류·인적 네트워크 중심 권역이자 특화 농수산물 생산지' 로서, 경기 북부지역은 '스마트기술 활용 산업을 기반으로하는 교류 네트워크 중심권역' 으로서, 강원 서부지역과 경기 연천 지역은 '탄소 감축 기술을 골자로 하는 생산-소비 복합권역' 으로서, 강원 동부지역은 '재생에너지 산업을 통한 유휴·노후 인프라의 그린 인프라 전환권역' 으로서, 크게 4가지 권역으로 그린데탕트 실천 잠재력을 유형화 할 수 있었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권3호
• /
• pp.193-199
• /
• 2002

콘크리트 구조물에 발생하는 구조적인 균열은 재하하중에 의하여 콘크리트가 저항할 수 있는 인장강도보다 더 큰 인장강도가 가해졌을 때 콘크리트의 인장영역에서 발생하며, 이는 구조물의 노후화 또는 재하하중에 대한 저항능력이 감소되었음을 의미한다. 그러므로 콘크리트에 발생한 구조적 균열은 구조물에 치명적인 손상을 유발시킬 수 있으며, 구조물의 안전성 확보와 효과적인 유지관리를 위해서는 이를 검출하는 기법에 대한 연구가 반드시 필요한 실정이다. 본 연구에서는 토목계측 분야에서 가장 널리 활용되고 있는 변형률 센서를 철근콘크리트 보에 부착하여 보의 인장부와 압축부의 변형률을 측정하는 실내실험을 수행하였으며, 하중 재하에 따른 변형률의 변화, 측정부위의 탄성계수 변화, 그리고 중립축의 변화 등을 비교 분석하였다. 분석 결과로부터, 측정된 변형률을 이용하여 중립축의 변화 추이를 추정하므로써 가장 효과적으로 균열을 검출할 수 있는 알고리즘을 제시하였다.

• 한국주거학회논문집
• /
• 제19권4호
• /
• pp.97-105
• /
• 2008

The purposes of this study were to determine the actual state of the indoor thermal environment in apartment units and to analyze the relationship between the living factors and indoor thermal elements. The field surveys consisted of measurements of physical elements and observations of living factors. In addition, the residents of 20 apartment units were interviewed to survey their subjective response. Field surveys were carried out from January to March 2007. Measuring elements were air temperature, globe temperature, and relative humidity. The results showed that the average of indoor temperature for the houses was $21.2{\sim}27.2^{\circ}C$, while 4 houses exceeded the comfort zone. The average of globe temperature for the houses was $21.3{\sim}27.5^{\circ}C$, while 6 houses exceeded the comfort zone. The mean relative humidity was $19.5{\sim}58.8%$, which is a relatively dry condition. The residents' average clothing value was $0.39{\sim}0.89$ clo(average 0.68 clo). The average thermal sensation vote on each room was $4.2{\sim}4.8$, which is 'neutral' to 'slightly warm'. Living factors had significant effect on indoor temperature in regression analysis were ventilation time(outdoor air exchange), opening time of door through balcony, and gas cooker use time.