• Bulletin of the Korean Chemical Society
• /
• v.30 no.6
• /
• pp.1247-1251
• /
• 2009

The recognition of neutral aromatic substrates by different neutral calix[4]arene receptors 1, 2, and 3 was studied by NMR spectroscopy. The stoichiometry is 1:1 in all cases as was confirmed by jobs plot. Owing to the deep cavity, 1 affords stronger binding abilities for substrate 4 and 5, while all receptors remained inert for substrates 6 and 7. The binding constants determined by $^1H$ NMR titration show that the recognition of substrate 4 by 1 gives strongest complexation ($K_a\;of\;9.8\;{\times}\;102\;M^{-1}$).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.190-192
• /
• 2007

A neutral beam system has been developed to produce hyperthermal neutral beams composed of indium, tin, and oxygen atoms. Using these hyper thermal neutral beams with energies in the range of tens of eV, high quality indium-tin oxide (ITO) thin films have been obtained on glass substrates at room temperature. The optical transmittance of the films is higher than 85% at a wavelength of 550 nm and the electrical resistivity is lower than $1{\times}10^{-3}{\Omega}cm$.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.9
• /
• pp.1522-1528
• /
• 2008

The morphogenetic behavior of a tropical marine Yarrowia lipolytica strain on hydrophobic substrates was studied. Media containing coconut oil or palm kernel oil (rich in lauric and myristic acids) prepared in distilled water or seawater at a neutral pH supported 95% of the cells to undergo a transition from the yeast form to the mycelium form. With potassium laurate, 51 % of the cells were in the mycelium form, whereas with myristate, 32% were in the mycelium form. However, combinations of these two fatty acids in proportions that are present in coconut oil or palm kernel oil enhanced the mycelium formation to 65%. The culture also produced extracellular lipases during the morphogenetic change. The yeast cells were found to attach to the large droplets of the hydrophobic substrates during the transition, while the mycelia were associated with the aqueous phase. The alkane-grown yeast partitioned more efficiently in the hydrophobic phases when compared with the coconut oil-grown mycelia. A fatty acid analysis of the mycelial form revealed the presence of lauric acid in addition to the long-chain saturated and unsaturated fatty acids observed in the yeast form. The mycelia underwent a rapid transition to the yeast form with n-dodecane, a medium-chain aliphatic hydrocarbon. Thus, the fungus displayed a differential behavior towards the two types of saturated hydrophobic substrates.

• Korean Journal of Microbiology
• /
• v.14 no.2
• /
• pp.49-49
• /
• 1976

Enzyme activities, such as glucoamylase dextrinogenic amylase, cellulase, acid protase and neutral protease, of Rhizopus isolated from various substrates collected throughout South Korea are measured, and their enzyme activities are surveyed from taxonomical, ecological and physiological viewpoint. Effect of carbon sources and phytohormones on the amylalse production of Rhizopus are also measured. Among the 735 strains of Phizopus isolated, strain number 587 exhibiting most prominent dextrinogenic amylase and netral protease activity is selected as the best strain, and the strain number 673, 108, 329, 165 and 728 are seleted for their predominant cellulase, acid protease, glucoamylase, dextrinogenic amylase and neutral protease activities, respectively. R.acidus and R.nigricans which exhibited relatively higher callulalse activity, showed lower activities for both amylase. R.tritici exhibited higher protease activity. The relations between activities and various substrates of wild strains are not outstnading difference, although the strains isolated from inland region exhibited more or less higher amylase and cellulase activities, than those of coast region, generally. Lactose and dextrin are most effective carbon sources for glucoamylase and dextrinogenic amylase production of the Rhizopus niveus, respectively. Although all phytohormones tested are effective for production of amylase by the Rhizopus strains, except nicotinamide for glucoamylase production, biotin and ascorbate are most effective for dextrinogenic amylase and glucoamylase production, respectively.

• Korean Journal of Microbiology
• /
• v.14 no.2
• /
• pp.47-56
• /
• 1976

Enzyme activities, such as glucoamylase dextrinogenic amylase, cellulase, acid protase and neutral protease, of Rhizopus isolated from various substrates collected throughout South Korea are measured, and their enzyme activities are surveyed from taxonomical, ecological and physiological viewpoint. Effect of carbon sources and phytohormones on the amylalse production of Rhizopus are also measured. Among the 735 strains of Phizopus isolated, strain number 587 exhibiting most prominent dextrinogenic amylase and netral protease activity is selected as the best strain, and the strain number 673, 108, 329, 165 and 728 are seleted for their predominant cellulase, acid protease, glucoamylase, dextrinogenic amylase and neutral protease activities, respectively. R.acidus and R.nigricans which exhibited relatively higher callulalse activity, showed lower activities for both amylase. R.tritici exhibited higher protease activity. The relations between activities and various substrates of wild strains are not outstnading difference, although the strains isolated from inland region exhibited more or less higher amylase and cellulase activities, than those of coast region, generally. Lactose and dextrin are most effective carbon sources for glucoamylase and dextrinogenic amylase production of the Rhizopus niveus, respectively. Although all phytohormones tested are effective for production of amylase by the Rhizopus strains, except nicotinamide for glucoamylase production, biotin and ascorbate are most effective for dextrinogenic amylase and glucoamylase production, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.1
• /
• pp.10-15
• /
• 2005

Effects of CH₄/H₂ flow rate ratio, chuck bias and microwave power on the structural properties and particle densities of diamond thin films deposited on Ti substrates in microwave plasma CVD were examined. High quality diamond thin films were deposited on Ti substrates in 2∼3 CH₄ Vol.% conditions due to the preferential formation of sp³-bonus ana selective removal of sp²-bonus in the CH₄/H₂ mixtures, and the mechanism for the formation of diamond particles on Ti was analysed. Diamond particle density increased with increasing negative chuck bias to Ti substrate due to bias-enhanced nucleation of diamond and the threshold voltage was found at ∼-50 V. With increasing microwave power the evolution from micro-crystalline graphite layer to diamond layer was observed.

• Korean Journal of Materials Research
• /
• v.32 no.9
• /
• pp.361-368
• /
• 2022

The overall process, from the pre-treatment of aluminum substrates to the eco-friendly neutral electroless Ni-P plating process, was observed, compared, and analysed. To remove the surface oxide layer on the aluminum substrate and aid Ni-P plating, a zincation process was carried out. After the second zincation treatment, it was confirmed that a mostly uniform Zn layer was formed and the surface oxide of aluminum was also removed. The Ni-P electroless plating films were formed on the secondary zincated aluminum substrate using electroless plating solutions of pH 4.5 and neutral pH 7.0, respectively, while changing the plating bath temperature. When a neutral pH7.0 electroless solution was used, the Ni-P plating layer was uniformly formed even at the plating bath temperature of 50 ℃, and the plating speed was remarkably increased as the bath temperature was increased. On the other hand, when a pH 4.5 Ni-P electroless solution was used, a Ni-P plating film was not formed at a plating bath temperature of 50 ℃, and the plating speed was very slow compared to pH 7.0, although plating speed increased with increasing bath temperature. In the P contents, the P concentration of the neutral pH 7.0 Ni-P electroless plating layer was reduced by ~ 42.3 % compared to pH 4.5. Structurally, all of the Ni-P electroless plating layers formed in the pH 4.5 solution and the neutral (pH 7.0) solution had an amorphous crystal structure, as a Ni-P compound, regardless of the plating bath temperature.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2995-3000
• /
• 2008

Understanding of the impinging behavior of an electrically charged spray is essential in determining appropriate operating conditions for electro-spraying of paints, surface coating materials and insecticides. In the present work, the wall impact behavior of an electrically charged drop has been investigated and compared with that of a neutral drop experimentally. The critical Sommerfeld number representing the spread-splash boundary for the charged drop impacting on the dielectric substrate turned out to be larger compared to that for the neutral drop with the same surface condition. The change of the transition boundary is due to the increase in the surface wettability of the drop on the substrate. However, with the electrically conducting substrates, the charging effect on the transition boundary appeared negligible. This is because the electric discharging time is much shorter than the time required for the flattened drop to reach its maximum extent.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.11
• /
• pp.1001-1003
• /
• 1994

A series of phosphodiesters of p-nitrophenyl phosphoryl derivatives were synthesized and used as a model substrate for phospholipase D (PLD). The phosphodiester substrates were synthesized from p-nitrophenyl phosphorodichloridate and corresponding alcohols with different chain lengths and polar groups. To measure the activity of PLD, either spectroscopic method for p-nitrophenol or pH-stat titration method was employed. For each substrate, effects of substrate concentration, pH, and $Ca^{2+}$ ion were examined. The kinetic parameters $V_{max}$ for the different substrates were varied depending on the chain lengths or charge of the alcohols. No calcium effect was observed in the hydrolysis of neutral and negatively charged alcohol derivatives, while positively charged choline derivative showed a strong $Ca^{2+}$ ion dependence.

• BMB Reports
• /
• v.28 no.2
• /
• pp.138-142
• /
• 1995

An anticoagulant/fibrinolytic protease was purified to homogeneity from the earthworm Lumbricus rubellus. The protein was a single chain glycoprotein of 32 kDa that exhibited strong proteolytic activity on human thrombin and fibrin clots. Proteolytic degradation of these plasma proteins by the purified enzyme occurred at a neutral pH range. Among several human plasma proteins tested as possible substrates for the protease reaction, the 32 kDa enzyme specifically hydrolyzed both thrombin and fibrin polymers without affecting other proteins, such as serum albumin, immunoglobulin, and hemoglobin. Treatment of the purified enzyme at neutral pH with either phenylmethylsulfonylfluoride or soybean trypsin inhibitor resulted in a loss of catalytic activity. The enzyme hydrolyzed the chromogenic substrate H-D-Phe-L-Pipecolyl-L-Arg-p-nitroanilide with a $K_m$ value of 1.1 ${\mu}M$ at a neutral pH. These results suggest that the anticoagulant/fibrinolytic enzyme from Lumbricus rubellus is a member of the serine protease family having a trypsin-like active site, and one of the potential clevage sites for the enzyme is the carbonyl side of arginine residues in polypeptide chains.