• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권9호
• /
• pp.2323-2340
• /
• 2012

Recent advances in cognitive radio technology have drawn immense attention to higher layer protocols above medium access control, such as transmission control protocol (TCP). Most proposals to improve the TCP performance in cognitive radio (CR) networks have assumed that either all nodes are in CR networks or the TCP sender side is in CR links. In those proposals, lower layer information such as the CR link status could be easily exploited to adjust the congestion window and improve throughput. In this paper, we consider a TCP network in which the TCP sender is located remotely over the Internet while the TCP receiver is connected by a CR link. This topology is more realistic than the earlier proposals, but the lower layer information cannot be exploited. Under this assumption, we propose an enhanced TCP protocol for CR networks called TCP for cognitive radio (TCP-CR) to improve the existing TCP by (1) detection of primary user (PU) interference by a remote sender without support from lower layers, (2) delayed congestion control (DCC) based on PU detection when the retransmission timeout (RTO) expires, and (3) exploitation of two separate scales of the congestion window adapted for PU activity. Performance evaluation demonstrated that the proposed TCP-CR achieves up to 255% improvement of the end-to-end throughput. Furthermore, we verified that the proposed TCP does not deteriorate the fairness of existing TCP flows and does not cause congestions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권6호
• /
• pp.1586-1605
• /
• 2012

With the prevalence of multimedia applications and the potential commercial usage of Mobile Ad hoc Networks (MANETs) in group communications, Quality of Service (QoS) support became a key requirement. Recently, some researchers studied QoS multicast issues in MANETs. Most of the existing QoS multicast routing protocols are designed with flat topology and small networks in mind. In this paper, we investigate the scalability problem of these routing protocols. In particular, a Position-Based QoS Multicast Routing Protocol (PBQMRP) has been developed. PBQMRP builds a source multicast tree guided by the geographic information of the mobile nodes, which helps in achieving more efficient multicast delivery. This protocol depends on the location information of the multicast members which is obtained using a location service algorithm. A virtual backbone structure has been proposed to perform this location service with minimum overhead and this structure is utilized to provide efficient packet transmissions in a dynamic mobile Ad hoc network environment. The performance of PBQMRP is evaluated by performing both quantitative analysis and extensive simulations. The results show that the used virtual clustering is very useful in improving scalability and outperforms other clustering schemes. Compared to On-Demand Multicast Routing Protocol (ODMRP), PBQMRP achieves competing packet delivery ratio and significantly lower control overhead.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권8호
• /
• pp.2042-2060
• /
• 2013

In wireless sensor networks (WSNs), energy efficiency is one of the most essential design considerations, since sensor nodes are resource constrained. Group communication can reduce WSNs communication overhead by sending a message to multiple nodes in one packet. In this paper, in order to simultaneously resolve the transmission security and scalability in WSNs group communications, we propose a hierarchical cluster-based secure and scalable group key management scheme, called HRKT, based on logic key tree and route key tree structure. The HRKT scheme divides the group key into cluster head key and cluster key. The cluster head generates a route key tree according to the route topology of the cluster. This hierarchical key structure facilitates local secure communications taking advantage of the fact that the nodes at a contiguous place usually communicate with each other more frequently. In HRKT scheme, the key updates are confined in a cluster, so the cost of the key updates is reduced efficiently, especially in the case of massive membership changes. The security analysis shows that the HRKT scheme meets the requirements of group communication. In addition, performance simulation results also demonstrate its efficiency in terms of low storage and flexibility when membership changes massively.

• 한국통신학회논문지
• /
• 제23권6호
• /
• pp.1538-1545
• /
• 1998

시스템의 신뢰성은 디지털 컴퓨터 시대가 시작된 이래 가장 중요한 관심사가 되어 왔다. 신뢰성을 증가시키는 가장 최근 방법 중 하나는 결함허용 시스템을 고안하는 것이다. 본 논문에서는 일반적 그래프 형태에 대해 결함 허용 시스템의 구성방법을 제안하였다. 이 시스템은 여러 개의 예비 노드를 가진다. 최근까지 결함허용 시스템 고안은 루프 형태와 트리 형태의 네트워크에서만 작용되어 왔다. 그러나 그것들은 매우 제한적인 경우이다. 본문의 알고리즘은 그러한 많은 제약을 가지지 않고서 어느 유형이든 적용될 수 있는 융통성을 갖도록 시도되었다. 이 알고리즘은 여러 단계로 구성되는데 최소 직경 스패닝 트리의 검출 단계, 최적 노드 결정 단계, 원래의 연결성 복구 단계 및 최종적으로 중복 그래프의 구성 단계이다.

• Journal of electromagnetic engineering and science
• /
• 제9권1호
• /
• pp.7-11
• /
• 2009

An Ultra-WideBand(UWB) Low-Noise Amplifier(LNA) is proposed and is implemented in a $0.18-{\mu}m$ CMOS technology. The proposed UWB LNA provides excellent wideband characteristics by combining a High-Pass Filter (HPF) with a conventional resistive-loaded LNA topology. In the proposed UWB LNA, the bell-shaped gain curve of the overall amplifier is much less dependent on the frequency response of the HPF embedded in the input stage. In addition, the adoption of fewer on-chip inductors in the input matching network permits a lower noise figure and a smaller chip area. Measurement results show a power gain of + 10 dB and an input return loss of more than - 9 dB over 2.7 to 6.2 GHz, a noise figure of 3.1 dB at 3.6 GHz and 7.8 dB at 6.2 GHz, an input PldB of - 12 dBm, and an IIP3 of - 0.2 dBm, while dissipating only 4.6 mA from a 1.8-V supply.

• 한국전자통신학회논문지
• /
• 제10권12호
• /
• pp.1395-1402
• /
• 2015

Electric heat tracing 시스템은 플랜트 내 각종 배관의 온도를 관리하는 시스템이다. 본 논문에서는 electric heat tracing 시스템을 통합적으로 감시하고 제어하기 위한 TESCON(: TEmperature Sensing and CONtrol) 시스템을 제안한다. TESCON 시스템에서 디바이스간의 정보 교환은 Zigbee 네트워크 기반의 무선 방식으로 이루어진다. TESCON 시스템의 성능 분석을 위해 컴퓨터 시뮬레이션을 수행하였다. 테스트베드를 통해서도 비슷한 결과를 얻음으로써 TESCON 시스템의 유효성을 입증하였다. 또한, 계층적 트리 토폴로지를 기반으로 하는 네트워크 분할, 채널 재사용, 프레임 집약 기법 등을 적용한 시스템 확장 방안도 제시하였다.

• 전기학회논문지
• /
• 제64권8호
• /
• pp.1161-1167
• /
• 2015

Distribution Management System(DMS) ienhancing distribution automation system-based operation efficiency is an optimized system by various operational applications in a distribution network. DMS employs various applications like topology reconfiguration, volt/var control, and restoration at events such as overload, voltage violation, and a fault in a distribution system. An operation efficiency to employ multi-applications as restoration with short-term load forecasting is higher than a performance by a single application; and the applications are accomplished by an operator’s control. Applications’ combination is determined by various alarm information which means critical issues in order to operate a distribution system. Thus, this paper proposes an application management system which can configure application combination, control applications depending on alarm information and check their performance condition. The proposed application management system can be customized by operator easily and have high operation efficiency and reliability because it is worked by reviewed alarm information from operator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.209-210
• /
• 2007

본 연구에서는 건설현장에서 빈번히 발생하는 안전사고를 줄이기 위해 근로자의 안전모 턱끈 착용을 도와주고 안전관리 감독자가 쉽게 확인 및 관리할 수 있는 전자식 안전모 착용 확인 시스템을 개발하였다. 안전모 착용을 확인하기 위해 마그네틱 근접 센서를 안전모 턱끈에 장착하여 안전모 착용 여부를 검출할 수 있게 하였다. 그리고 무선 센서 네트워크를 구성하기 위해 424.700MHz 주파수를 사용하는 무선 모듈을 개발하여 안전모의형에 장착하여 센서 노드(Sensor Node)를 구성하였으며, 메쉬 토폴로지(Mesh Topology)를 적용하였다. 그리고 중앙 관리실에서 근로자의 상황 인지를 위한 안전모 확인 모니터링 시스템을 개발하였다. 본 시스템으로 인하여 근로자의 안전을 도모하고, 안전 사고에서 근로자의 부상 및 인명 손실을 최소화할 수 있으며, 건설용 엘리베이터 안전 상황 인지, 타워크레인 안전 문제등의 시스템으로 활용이 가능할 것이다.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.688-698
• /
• 2018

Quasi Z-Source Multilevel Inverter (QZMLI) topology has attracted grid connected Photovoltaic (PV) systems in recent days. So there is a remarkable research thrust in switching techniques and control strategies of QZMLI. This paper presents the mathematical analysis of Phase shift- Pulse Width Amplitude Modulation (PS-PWAM) for QZMLI and emphasizes on the advantages of the technique. The proposed technique uses the maximum and minimum envelopes of the reference waves for generation of pulses and proportion of it to generate shoot-through pulses. Hence, it results in maximum utilization of input voltage, lesser switching loss, reduced Total Harmonic Distortion (THD) of the output voltage, reduced inductor current ripple and capacitor voltage ripple. Due to these qualities, the QZMLI with PS-PWAM emerges to be the best suitable for PV based grid connected applications compared to Phase shift-Pulse Width Modulation (PS-PWM). The detailed math analysis of the proposed technique has been disclosed. Simulation has been performed for the proposed technique using MATLAB/Simulink. A prototype has been built to validate the results for which the pulses were generated using FPGA /SPARTAN 3E.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.499-502
• /
• 2018

선형 네트워크 토폴로지에서 노드간 협력을 이용한 무선 전력공급 기반 멀티홉 전송 방식을 제안한다. 제안 프로토콜은 멀티홉 경로의 생존시간의 최대화를 목적으로 멀티홉 노드의 생존시간을 동일하게 맞추어 주도록 노드별 에너지 전송 시간을 결정한다. 각 노드의 생존시간을 동일하게 만들기 위하여 새떼가 동일 속도로 날아다니는 행동양식을 모방한 flocking 알고리즘을 적용하여 노드의 생존시간을 지역적으로 분산 평균화 시킨다. 시뮬레이션을 통하여 제안 알고리즘이 각 노드의 생존시간을 모두 동일하게 만들어 전체 경로의 생존시간을 최대화할 수 있음을 보여준다.