• Progress in Superconductivity and Cryogenics
• /
• v.21 no.4
• /
• pp.44-47
• /
• 2019

This paper is a study of recovery under load process of superconducting fault current limiter (SFCL). SFCL consists of five parallel-connected high-temperature superconductor (HTS) tapes additionally stabilized by stainless tape. Previously, HTS was heated by current pulse to simulate a short circuit in a power grid. During the cooling period, the current amplitude decreased to 23% or less of HTS critical current value, which is the simulation of network re-switching. When HTS with a polymer coating is cooled, temperature gradient on thermal insulation layer occurs, that prevents a boiling crisis and improves the heat sink into liquid nitrogen. Two samples are coated with a 30 ㎛ and 50 ㎛ polylactide (PLA) layers, reference sample has no polymer coating on it. Samples with a polymer coating show 3-5 times faster cooling than the reference one.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.3
• /
• pp.29-35
• /
• 2003

Generator for wind power can be either synchronous or asynchronous (induction) types. Induction and synchronous generators behave in a different way when subjected to severe faults. Induction generators does not have an angle stability limit and short circuit in the neighborhood of an Induction generator causes the demagnetization of the machine when the fault is cleared, the voltage raises slowly, while the grid contributes with reactive power to the generator and the magnetic flux recovers. On the other hand in the synchronous generators the recovery of the voltage is immediate, since the excitation of the rotor angle comes from an independent circuit. This paper shows the result of the transient state analysis in the network connected to wind generation system Several case studies have been conducted to determine the effect of the clearing time of a fault on the network stability. It has been found that the critical clearing time can be as low as 61ms in the case of induction generator compared to 370ms in the case of synchronous generator.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.5_6
• /
• pp.328-334
• /
• 2004

Recently, Software DSMs continue to improve its performance and scalability As Software DSMs become attractive on larger clusters, the focus of attention is likely to move toward improving the reliability of a system. A popular approach to tolerate failures is message logging with checkpointing, and so many log-based rollback recovery schemes have been proposed. In this work, we propose a remote logging scheme which uses the volatile memory of a remote node assigned to each node. As our remote logging does not incur frequent disk accesses during failure-free execution, its logging overhead is not significant especially over high-speed communication network. The remote logging tolerates multiple failures if the backup nodes of failed nodes are alive. It makes the reliability of DSMs grow much higher. We have designed and implemented the FT-KDSM(Fault Tolerant KAIST DSM) with the remote logging and showed the logging overhead and the recovery time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1B
• /
• pp.22-30
• /
• 2007

In this paper, to achieve consistency maintenance as well as stable service execution, we build a Fault-Tolerant Object Group framework that provides both of the group management service and the load scheduling service. The group management service supports the object management such as registration and authentication, and provides two schemes for failure recovery using the service priority and the checkpointing. In the load scheduling servile, we improve the effectiveness of service execution through the reasoning process of object loads based on the ANFIS architecture. The effectiveness in the performance of the developed framework is validated through a virtual home-network simulation based on the FTOG framework.

• Journal of KIISE:Information Networking
• /
• v.31 no.2
• /
• pp.233-241
• /
• 2004

In this paper, we propose a packet-lossless fast rerouting scheme at a link/node fault in MPLS (Multiprotocol Label Switching) network with minimized accumulated buffer delay problem at ingress node. The proposed scheme uses a predefined, alternative LSP (Label Switched Path) In order to restore user traffic. We propose two restoration approaches. In the first approach, an alternative LSP is initially allocated with more bandwidth than the protected working LSP during the failure recovery phase. After the failure recovery, the excessively allocated bandwidth of the alternative LSP is readjusted to the bandwidth of the working LSP. In the second approach, we reduce the length of protected working LSP by using segment-based restoration. The proposed approaches have merits of (ⅰ) no buffer delay problem after failure recovery at ingress node, and (ⅱ) the smaller required buffer size at the ingress node than the previous approach.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.147-154
• /
• 1998

As technical systems in building are being developed, the processes and systems get more difficult for the average operator to understand. When operating a complex facility, it is beneficial in equipment management to provide the operator with tools which can help in dicision making for recovery from a failure of the system. The main object of the study is to develop real-time automatic fault detection and diagnosis system for optimal operation of IBS building.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.34-40
• /
• 2014

With the economical data service delivery, the packet transport network (PTN) technologies have emerged as an important player in the next-generation transport networks. As the PTN continues to make such considerable progress, it is being challenged by network providers who need rapid and reliable recovery capabilities to guarantee the availability of their services. This paper introduces several fault detection mechanisms for a client signal failure in packet transport networks and proposes a reliable transmission method of IP flows from routers using the combination of Ethernet services. Based on the first fault detection methods, client signal fault is detected within tens or hundreds of milliseconds. It enables the client network devices to perform their own recovery processes within one second. The second mechanism enables failed Ethernet services to be bypassed via other Ethernet services over disjoint paths, so as to contribute on reducing packet loss of IP traffic.

• Progress in Superconductivity
• /
• v.7 no.2
• /
• pp.114-119
• /
• 2006

High critical current density, high n value, multiple faults endurances, and fast recovery characteristics of YBCO thin films are very attractive characteristics for developing resistive type superconducting fault current limiters. But due to the limited current and voltage ratings of one YBCO module, it is needed to construct series and parallel module connections for high capacity electric networks. Especially for distribution network, more than 30 units should be connected in series to meet voltage level. So in order to construct distribution-level superconducting fault current limiter, simultaneous quench in one YBCO thin films should be realized, and furthermore, quench should be occurred in all fault current limiting units equally to avoid local heating and failures. In this paper, we proposed optimum design of YBCO thin films for fault current limiting module and technical method using shunt resistor to achieve simultaneous quench between multi current limiting units. From the analytical and the experimental results, optimal current path and thickness of shunt material was determined for YBCO thin films and shunt resistor between modules was developed. Finally, 14 kV one phase resistive fault current limiter using multi YBCO thin films was constructed and it was possible to get satisfactory test results.

• The KIPS Transactions:PartA
• /
• v.13A no.7 s.104
• /
• pp.607-614
• /
• 2006

The checkpointing schemes should reduce the process delay through managing the checkpoints of each node to fit the network load to enhance the performance of the process running on the cluster system that write the checkpoints into its global stable storage. For this reason, a cluster system with single IO space on a distributed RAID chooses a suitable checkpointng scheme to get the maximum IO performance and the best rollback recovery efficiency. In this paper, we improved the striped checkpointing scheme with dynamic stripe group size by adapting to the network bandwidth variation at the point of checkpointing. To analyze the performance of the multi striped checkpointing scheme, we applied Linpack HPC benchmark with MPI on our own cluster system with maximum 512 virtual nodes. The benchmark results showed that the multistriped checkpointing scheme has better performance than the striped checkpointing scheme on the checkpoint writing efficiency and rollback recovery at heavy system load.

• Journal of Information Processing Systems
• /
• v.11 no.4
• /
• pp.509-527
• /
• 2015

Wireless Video Sensor Networks (WVSNs) have become a leading solution in many important applications, such as disaster recovery. By using WVSNs in disaster scenarios, the main goal is achieving a successful immediate response including search, location, and rescue operations. The achievement of such an objective in the presence of obstacles and the risk of sensor damage being caused by disasters is a challenging task. In this paper, we propose a fault tolerance model of WVSN for efficient post-disaster management in order to assist rescue and preparedness operations. To get an overview of the monitored area, we used video sensors with a rotation capability that enables them to switch to the best direction for getting better multimedia coverage of the disaster area, while minimizing the effect of occlusions. By constructing different cover sets based on the field of view redundancy, we can provide a robust fault tolerance to the network. We demonstrate by simulating the benefits of our proposal in terms of reliability and high coverage.