• Polymer(Korea)
• /
• v.27 no.3
• /
• pp.210-216
• /
• 2003

4-Vinyl-1-cyclohexene diepoxide (VCE)/diglycidyl ether of bisphenol-A (DGEBA) epoxy blends with benzylquinoxalinium hexafluoroanti-monate were cured using an electron-beam technique. The effect of DGEBA content to VCE on cure behavior, thermal stabilities, and mechanical properties was investigated. The composition of VCE/DGEBA blend system vaned within 100:0, 80:20, 60:40, 40:60, 20:80, and 0:100 wt%. The cure behavior and thermal stability of the cured specimens was monited by near-infrared spectroscopy and thermogravimetric analysis, respectively. Also, the critical stress intensity factor ($_{4}$) test of the cured specimens was performed to study the mechanical interfacial properties. As a result, the decreases of short side-chain structure and chain scission were observed in NIR measurements as the DGEBA content increases, resulting in varying the hydroxyl and carbonyl groups. And, the initial decomposition temperature (IDT), temperature of maximum weight loss (T$\_$max/), and decomposition activation energy (E$\_$d/) as thermal stability factors were increased with increasing the DGEBA content. These results could be explained by mean of decreasing viscosity, stable aromatic ring structure, and grafted interpenetrating polymer network with increasing of DGEBA content. Also, the maximum $_{4}$ value showed at mixing ratio of 40:60 wt% in this blend system. in this blend system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.41-41
• /
• 2008

In general, polyimides (PIs) are used in alignment layers in liquid crystal displays (LCDs). The rubbing alignment technique has been widely used to align the LC molecules on the PI layer. Although this method is suitable for mass production of LCDs because of its simple process and high productivity, it has certain limitations. A rubbed PI surface includes debris left by the cloth, and the generation of electrostatic charges during the rubbing induces local defects, streaks, and a grating-like wavy surface due to nonuniform microgrooves that degrade the display resolution of computer displays and digital television. Additional washing and drying to remove the debris, and overwriting for multi-domain formation to improve the electro-optical characteristics such as the wide viewing angle, reduce the cost-effectiveness of the process. Therefore, an alternative to non-rubbing techniques without changing the LC alignment layer (i.e, PI) is proposed. The surface of LC alignment layers as a function of the ion beam (IE) energy was modified. Various pretilt angles were created on the IB-irradiated PI surfaces. After IB irradiation, the Ar ions did not change the morphology of the PI surface, indicating that the pretilt angle was not due to microgrooves. To verify the compositional behavior for the LC alignment, the chemical bonding states of the ill-irradiated PI surfaces were analyzed in detail by XPS. The chemical structure analysis showed that ability of LCs to align was due to the preferential orientation of the carbon network, which was caused by the breaking of C=O double bonds in the imide ring, parallel to the incident 18 direction. The potential of non-rubbing technology for fabricating display devices was further conformed by achieving the superior electro-optical characteristics, compared to rubbed PI.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.2
• /
• pp.95-102
• /
• 2002

Spatial interpolation has become a common procedure in converting temperature forecasts and observations at irregular points for use in regional scale ecosystem modeling and the model based decision support systems for resource management. Neglection of terrain effects in most spatial interpolations for short term temperatures may cause erroneous results in mountainous regions, where the observation network hardly covers full features of the complicated terrain. A spatial interpolation model for daytime hourly temperature was formulated based on error analysis of unsampled site with respect to the site topography. The model has a solar irradiance correction scheme in addition to the common backbone of the lapse rate - corrected inverse distance weighting. The solar irradiance scheme calculates the direct, diffuse and reflected components of shortwave radiation over any surfaces based on the sun-slope geometry and compares the sum with that over a reference surface. The deviation from the reference radiation is used to calculate the temperature correction term by an empirical conversion formula between the solar energy and the air temperature on any sloped surfaces at an hourly time scale, which can be prepared seasonally for each land cover type. When this model was applied to a 14 km by 22 km mountainous region at a 10 m horizontal resolution, the estimated hourly temperature surfaces showed a better agreement with the observed distribution than those by a conventional method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.1
• /
• pp.72-79
• /
• 2013

In wireless sensor networks, the selective wakeup scheme is one of the energy saving mechanisms, that is used for an object detecting or tracking. Recently, many protocols are proposed using the selective wakeup scheme for the continuous objects tracking such as forest fires and poison gas. They predict the future shape of continuous objects and activate only sensors in the predicted boundary area of the objects. It works correctly in a uniformly deployed wireless sensor networks. However, it cannot be directly applied to a randomly deployed sensor networks with voids. When the predicted area is in the void area, the activation message cannot reach and the predicted area cannot be activated at the right time. It leads to many detection errors for continuous object. Moreover, if a sensor is once foiled in a activation control then the next activation control might be continuously failed. The detection errors can be result in serious harm to people. In this paper, we propose a chaining selective wakeup scheme for robust continuous object tracking in wireless sensor networks. In our protocol, we collect the information of a void area during the network configuration time; if the next boundary area is in the void area, we activate the chained area surrounding the void area with activation control message.

• The Journal of the Korea Contents Association
• /
• v.20 no.8
• /
• pp.513-521
• /
• 2020

Launched in August, 2016, the online public benefit project ANT FOREST has planted more than one hundred million trees in desertification areas and is currently continuing on with its activities. It is a fruit of online communications network development, and the public benefit project based on this puts more emphasis on the spirits of public interest rather than the investments of public services, unlike traditional public benefit activities. Hence the purpose of this study is to figure out the interaction between the users supporting the online public benefit and the public benefit progress online. The study was divided into 4 stages in order to find out the interaction, key factors for users to continue to support online public interest. First, preceeding studies on online public benefit will be reviewed to understand the characteristics of online public benefit. Second, determine the public benefit nature of ANT FOREST and investigate the project progress. Third, review the usage rate of ANT FOREST and categorize the properties of users. Fourth, interview was conducted to direct the interaction between the online public benefit project and the user. In conclusion, the online public benefit project completes the public benefit process through the user, the operator, and the supporter, the important factor connecting the energy connecting the process in cyber space and the public benefit activity in reality is the sense of participation, and the user continues the public benefit project through this sense of participation.

• The Journal of the Korea Contents Association
• /
• v.10 no.8
• /
• pp.51-58
• /
• 2010

In data collection using a mobile sink, the time that sensor nodes are included in its communication radius is not uniform. The data collection schedule in non-uniform time is needed between a mobile sink and sensor nodes for efficient data collection. The existing data collection schemes using a mobile sink considered staying time in its communication range and data collected by the mobile sink. However, they did not consider the characteristics of data collected in sensor networks. In this paper, we propose a TDMA based schedule scheme that consists of the data collection period by each sensor nodes and the data collection period between a mobile sink and sensor nodes. Moreover, we propose a data collection scheme considering the variability of data in sensor networks. The proposed data collection scheme collects only data that changed larger than the threshold set by the user. In order to show the superiority of the proposed scheme, we compare it with DWEDF that aims to collect data uniformly. As a result, our experimental results show that the proposed scheme reduces about 23% energy consumption and the data collection failure of sensor nodes over the DWEDF.

• Journal of Applied Biological Chemistry
• /
• v.55 no.4
• /
• pp.227-234
• /
• 2012

We observed that oil began to accumulate at 25 seed days after flowering (DAF) and reached the maximum potential at 35 seed DAF of oilseed rape, and the greatest weight of 100 seeds was obtained at 35 seed DAF. To survey a broad analysis of gene expression in developing embryos of Brassica napus, the Bn 300k microarray have been constructed. The Bn 300k Microarrary was designed from 80,696 unigenes clustered from 543,448 ESTs and 780 cDNA at NCBI. These arrays have been hybridized in a series of experiments with probes derived from seeds and leaf of B. napus. Approximately 8.5% of the 7,000 genes were expressed as ratios 2-fold higher in seed (25 DAF) than leaves and 0.4% at ratios 10. Also we observed that storage and cell differentiation-related genes were highly expressed at 10 DAF, whereas energy-related genes including fatty acid metabolism were increased up depending on seed maturation using Microarray, which was confirmed by reverse transcriptase polymerase chain reaction. These results suggest that B. napus arrays provide a very useful data set of seed-specific expression that can be further analyzed by examination of the promoter regions of these genes and help our understanding of the complex regulatory network in developing seeds.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.3
• /
• pp.140-148
• /
• 2009

Recent advances in communication and multimedia technologies make it possible to provide video-on-demand(VOD) services and people can access video servers over the Internet at any time using their electronic devices, such as PDA, mobile phone and digital TV. Each device has different processing capabilities, energy budgets, display sizes and network connectivities. To support such diverse devices, multiple versions of videos are needed to meet users' requests. In general cases, VOD servers cannot store all the versions of videos due to the storage limitation. When a device requests a stored version, the server can send the appropriate version immediately, but when the requested version is not stored, the server first converts some stored version to the requested version, and then sends it to the client. We call this conversion process transcoding. If transcoding occurs frequently in a VOD server, the CPU resource of the server becomes insufficient to response to clients. Thus, to admit as many requests as possible, we need to maximize the CPU availability. In this paper, we propose a new algorithm to select versions from those stored on disk using a branch and bound technique to maximize the CPU availability. We also explore the impact of these storage management policies on streaming to heterogeneous users.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.155-167
• /
• 2016

Technology valuation is necessary for determining the feasibility of technology commercialization. However, existing methods focus only on technology evaluation, with limitation in sufficiently reflecting buyer viewpoint. In addition, it causes a gap between estimated value and market value. Therefore, this research suggests a new technology valuation method which focuses on the perspectives of buyers. Technology factors, buyer factors and market factors are first determined and their relationships are analyzed. Second, based on the relationships, profit projections are calculated using the discount cash flow method. Finally, profit projections for each year are discounted. The proposed method was applied using the ubiquitous home network system and audio service and illumination control method and results compared with the value of a technology valuation guide distributed by the Ministry of Trade, Industry and Energy. The technology valuation approach used in this research is quantitative and systematic and can be used as a decision making support tool in technology transfer, reflecting various perspectives of stakeholders.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.250-254
• /
• 2002

Intergranular corrosion of austenitic stainless steels is a conventional and momentous problem during welding and high temperature use. One of the major reasons for such intergranular corrosion is so-called sensitization, i.e., chromium depletion due to chromium carbide precipitation at grain boundaries. Conventional methods for preventing sensitization of austenitic stainless steels include reduction of carbon content in the material, stabilization of carbon atoms as non-chromium carbides by the addition of titanium, niobium or zirconium, local solution-heat-treatment by laser beam, etc. These methods, however, are not without drawbacks. Recent grain boundary structure studies have demonstrated that grain boundary phenomena strongly depend on the crystallographic nature and atomic structure of the grain boundary, and that grain boundaries with coincidence site lattices are immune to intergranular corrosion. The concept of "grain boundary design and control", which involves a desirable grain boundary character distribution, has been developed as grain boundary engineering. The feasibility of grain boundary engineering has been demonstrated mainly by thermomechanical treatments. In the present study, a thermomechanical treatment was tried to improve the resistance to the sensitization by grain boundary engineering. A type 304 austenitic stainless steel was pre-strained and heat-treated, and then sensitized, varying the parameters (pre-strain, temperature, time, etc.) during the thermomechanical treatment. The grain boundary character distribution was examined by orientation imaging microscopy. The intergranular corrosion resistance was evaluated by electrochemical potentiokinetic reactivation and ferric sulfate-sulfuric acid tests. The sensitivity to intergranular corrosion was reduced by the thermomechanical treatment and indicated a minimum at a small roll-reduction. The frequency of coincidence-site-lattice boundaries indicated a maximum at a small strain. The ferric sulfate-sulfuric acid test showed much smaller corrosion rate in the thermomechanically-treated specimen than in the base material. An excellent intergranular corrosion resistance was obtained by a small strain annealing at a relatively low temperature for long time. The optimum parameters created a uniform distribution of a high frequency of coincidence site lattice boundaries in the specimen where corrosive random boundaries were isolated. The results suggest that the thermomechanical treatment can introduce low energy segments in the grain boundary network by annealing twins and can arrest the percolation of intergranular corrosion from the surface.