• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.4
• /
• pp.421-428
• /
• 2007

Many engineering problems on the pipeline flow use continuity, energy, friction loss head equation. To calculate friction loss head in a pipeline, Darcy-Weisbach and many average velocity equations can be used and Hazen-Williams equation is used frequently in the pipe network for the water supply systems. Darcy-Weisbach equation is a general one acquired from applying Bernoulli's equation in the pipeline flow and Hazen-Williams equation is a experimental one in case that pipe velocity is below 3m/sec and pipe diameter is over 50mm. In this study, comparing Darcy-Weisbach with Hazen-Williams equation, relation f and C that are expressed as roughness coefficients of those equations is explained. Next, head losses calculated from using those equations are compared and those are applied in realistic pipelines. Comparing f with C, the f is decreasing linearly according to increase of the Reynolds number Re and increasing in case the C is decreasing. additionally, the C is increasing up to a point and then is decreasing according to increase of the Re. Next, the C is increasing and Re's range for increase of the C lengthens in case of decreasing of the relative roughness ${\varepsilon}/d$. Comparing head losses acquired from the two equations, head loss appears large in case that the C is decreasing and the ${\varepsilon}/d$ is increasing. additionally, Head loss calculated by the Darcy-Weisbach equation varies larger than one by Hazen-Williams equation in regard of the Re. Next, change aspect of head loss acquired by the C is distinguished more clearly than the one by the ${\varepsilon}/d$.

• Journal of KIISE:Databases
• /
• v.32 no.4
• /
• pp.429-440
• /
• 2005

As rapid improvement in electronic technologies makes sensor hardware more powerful and capable, the application range of sensor networks Is getting to be broader. The main purpose of sensor networks is to monitor the phenomena in interesting regions (e.g., factory warehouses, disaster areas, wild fields, etc) and return required data. The k Nearest Neighbor (KNN) query that finds k objects which are geographically close to the given point is an Important application in sensor networks. However, most previous approaches are either seem to be impractical or are not energy-efficient in resource-limited sensor networks. In this paper. we propose an efficient KNN query processing method in sensor networks. In the proposed method, we dynamically increase searching boundary, if necessary, and traverse nodes inside the boundary until finding k nearest neighbors. Since only the representative sensor nodes are visited, our algorithm reduces a number of messages. We show thorough experiments that the proposed method performs better than the existing method in various network environments.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.340-342
• /
• 2005

최근 기지국(Base Station)의 도움 없이 이동 단말기(Mobile Device) 간의 다중 무선 홉을 사용하여 송수신자 간의 데이터 전송을 가능하게 하는 Ad-hoc 통신망에 관한 연구가 활발히 진행되고 있다. Ad-hoc 통신망을 구성하는 이동 단말은 이동성을 고려하여 한정된 배터리로 동작을 하게 된다. Ad-hoc 통신망에서 이동 단말은 종단(End Host)으로만 동작하는 것이 아닌 중계 노드(Intermediate Node)로도 동작을 하기 때문에 통신상에 경로를 제공하는 중요한 역할도 한다. 하지만, 현재 인터넷 상에서 광범위하게 사용되고 있는 전송 규약인 TCP(Transmission Control Protocol)는 수동적인(Reactive)혼잡 제어(Congestion Control)방식으로 망의 혼잡으로 인한 패킷 손실 발생 이전까지 전송 윈도우의 크기를 증가 때문에 반복적인 혼잡과 그로 인한 패킷 손실로 인해 불필요한 재전송을 반복하게 된다. 이와 같이 기존 TCP는 무선 통신망에서 동작하는 이동 단말의 한정된 배터리 전원을 고려하지 않고 동작하기 때문에 이동 단말의 에너지를 불필요하게 낭비하는 문제를 가지게 된다. 본 논문은 Ad-hoc 망에서 이동 단말의 에너지 효율을 개선하기 위해 불필요한 재전송 방지 및 망 상태에 따라 전송률을 적절하게 조절하는 TCP의 새로운 혼잡 제어 기법을 제시하였다. 또한 ns-2 시뮬레이터를 이용한 실험을 통해 이동 단말의 에너지 효율이 제안된 혼잡 제어 기법에 의해 향상되었음을 확인하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.57-64
• /
• 2006

Multiprocessor system on chip (MPSoC) platforms has set a new innovative trend for the SoC design. Quality of service parameters and performance matrix are leading to the adoption of new design methodology for SoC, which will incorporate highly scalable, reusable, predictable, cost and energy efficient platform not only for underlying communication backbone but also for the entire system architecture of NOC. Like the layered architecture for the communication backbone of NOC, we have proposed the entire system architecture for NOC to be a seven layered architecture in itself. Such a platform can separate the domain specific issues which will model concurrency along with the synchronization issues more effectively. For such a layered architecture, model of computation will provide a framework to that can model concurrency and synchronization issues which are natural for any application. Therefore it becomes extremely important to use a right computation model in a specific NOC region.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.1
• /
• pp.13-21
• /
• 2008

In general, data communication among sensor nodes requires more energy than internal processing or sensing activities. In this paper, we propose a noble technique to reduce the number of packet transmissions necessary for sending/receiving queries/results among neighboring nodes with the help of context-aware routing tables. The important information maintained in the context-aware routing table is which physical properties can be measured by descendent nodes reachable from the current node. Based on the information, the node is able to eliminate unnecessary packet transmission by filtering out the child nodes for query dissemination or result relaying. The simulation results show that up to 80% of performance gains can be achieved with our technique.

• Journal of the Korean Institute of Gas
• /
• v.15 no.6
• /
• pp.8-13
• /
• 2011

All over the nation, a lot of industrial complex utilize gas as their energy source. Possibilities are fire, explosion, and leakage could happen any time in these large complexes. To prevent these tragic accidents and to minimize the damage when the accident occurs, the development of diagnostic technology for these facilities is imperative. The safety check is conducted on an individual and partial basis, currently. Accordingly, the accumulation and improvement of the safety management technology is necessary in order to make all the different checking techniques and management systems compatible, since checking processes, result interpretation techniques, and subsequent prognoses are not the same. The program provides damage scenarios from gas leakage. The output enables policy makers to predict the degree of infliction. Through this program, engineers are able to design an effective gas safety program to operate and maintain ubiquitous gas facilities.

• Korean Journal of Materials Research
• /
• v.22 no.6
• /
• pp.309-315
• /
• 2012

Metal foam has many excellent properties, such as light weight, incombustibility, good thermal insulation, sound absorption, energy absorption, and environmental friendliness. It has two types of macrostructure, a closed-cell foam with sealed pores and an open-cell foam with open pores. The open-cell foam has a complex macrostructure consisting of an interconnected network. It can be exploited as a degradable biomaterial and a heat exchanger material. In this paper, open cell Mg alloy foams have been produced by infiltrating molten Mg alloy into porous pre-forms, where granules facilitate porous material. The granules have suitable strength and excellent thermal stability. They are also inexpensive and easily move out from open-cell foamed Mg-Al alloy materials. When the melt casting process used an inert gas, the molten magnesium igniting is resolved easily. The effects of the preheating temperature of the filler particle mould, negative pressure, and granule size on the fluidity of the open cell Mg alloy foam were investigated. With the increased infiltration pressure, preheat temperature and granule sizes during casting process, the molten AZ31 alloy was high fluidity. The optimum casting temperature, preheating temperature of the filler particle mould, and negative pressure were $750^{\circ}C$, $400-500^{\circ}C$, and 5000-6000 Pa, respectively, At these conditions the AZ31 alloy had good fluidity and castability with the longest infiltration length, fewer defects, and a uniform pore structure.

• Journal of the Korean Society for Library and Information Science
• /
• v.48 no.3
• /
• pp.237-264
• /
• 2014

This study aims to investigate the influence of personality styles on information seeking behaviors of undergraduate students. To this end, first, Korean Enneagram Personality Training Indicator (KEPTI) tool was used to measure Enneagram personality styles. Next, to measure information seeking activities, 200 of undergraduate students were recruited, and a questionnaire with 13 questions was designed. The questions included information usage motivation, how to collect and search scholarly information, challenges faced in the search process, level of satisfaction, and the use of SNS (Social Network Service). This research concluded that personality traits affected information seeking behavior and Enneagram types of each center of energy consistently did not show similar information seeking behavior.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.61.2-61.2
• /
• 2015

15P/Finlay is one of the Jupiter-Family Comets that has long been known since the late 19 century. The comet maintains the perihelion around 1.0 AU over a century, without showing any prominent activities (i.e. fragmentation or eruption) since the discovery. According to reports in unpublished observations, the comet exhibited an outburst in the middle of 2014 December. We conducted a imaging observation of 15P/Finlay just after the report, from 2014 December 23 to 2015 February 18 using three telescopes (the Okayama Astrophysical Observatory 50-cm telescope, the Ishigakijima Astronomical Observatory 105-cm telescope, and the Nishi-Harima Astronomical Observatory 2-m telescope), which constitute a portion of the OISTER (an inter-university observation network in the optical and infrared wavelengths). As a result of the frequent observations, we witnesses the second outburst around UT 2015 January 16. Such cometary outbursts draw the attention to researchers on ground that they could offer insight into the internal structure of comets, following a historical outburst occurred at 17P/Holmes on 2007 October 23. Although cometary outbursts have been often reported mostly in unpublished observations or unreviewed reports, it should be emphasized that there are not a sufficient number of astrophysical research which characterizes the physical properties by observing the aftermaths. This presentation provides a new observational result of 15P/Finlay outburst. Based on the morphological development of the dust cloud as well as the near-nuclear magnitude, we will derive the kinetic energy of the outburst. Finally we plan to compare the results of 15P/Finlay with those of analogical events at 17P/Holmes and P/2010 V1 (Ikeya-Murakami).

• Journal of Environmental Impact Assessment
• /
• v.4 no.3
• /
• pp.55-61
• /
• 1995

The European Community (EC) began dealing with the subject of environmental impact assessment (EIA) in the mid-1970s. After ten years of preparatory work and more than 20 draft versions, the EC Council of Ministers adopted, in 1985, the Directive on the assessment of the effects of certain public and private projects on the environment (85/337/EEC). This directive requires the member states to make EIA mandatory for certain projects. Its Article 3 defines the purpose of the instrument: "The environmental impact assessment will identify, describe and assess the direct and indirect effects of a project. There are no rules on scoping or on post-project analysis. However, member states are free to adopt, in their domestic legislation, more stringent rules regarding the scope and procedure of EIA. Consequently, they have developed national EIA systems which differ considerably from each other. Also, EIA practice in each of these countries is different from that in the others. In 1992, the EC Council adopted the 'Flora, Fauna, Habitat' Directive which lays down an additional EIA requirement. Member states will have to develop a network of 'European' nature conservation areas. Each project or plan possibly endangering these areas will have to be assessed whether it is in line with the protection purposes laid down for them. Although the directive does not say so explicitly, this means that a kind of EIA will have to be carried out for those projects and plans. For several years, the Commission has been developing proposals for a directive on EIA of plans and programmes ("strategic EIA"). This would supplement directive 85/337/EED, and would require and EIA for plans and programmes influencing decisions on specific projects(e.g. agricultural plans or energy programmes). At present, procedural and methodological questions of strategic EIA are being discussed extensively both within and without the European Union.