• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.3
• /
• pp.9-14
• /
• 2008

In this paper, we propose the channel sounding scheme which is made for ideal communication between some application as well as the short distance of high speed data transmission in MIMO-OFDM system for Wireless PAN. This method is able to perceive the duration of the impulse response through the delaying of power delay profile, modeled a power delay profile which has an attenuate characteristic, and obtained the coefficient of channel response by ML (maximum likelihood). Through the amplitudes, phases and delays associated with each multipath component which were acquired from this channel sounding scheme, we can describe the wave propagation characteristics of channels between the transmitter and receiver so that the receiver could enhance not only the reliability but also the ability of communication link.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.54 no.3
• /
• pp.141-147
• /
• 2005

In this paper, We are going to propose the fire protection system with using CAN(Controller Area Network). The larger, higher and deeper buildings are, the more dangerous people are when fire happens. We should be aware of the problems of prior fire protection system. Therefore, we construct embedded system based on CAN communication that is capable of N:N communication, and build independent fire protection system. If the fire is occurred on the building, the problem is that how fast we can detect the fire and put off it by using available system. this is major factor that reduces damage of our wealth. therefore in this studies We would like to design more stable system than current system. this system that is based on CAN communication which is available N:N communication constructs and is designed to compensate for each fault so that our aim is to reduce the line of system and cost of installation and to suppose future type fire protection system. We are simulated by NIST FDS(Fire Dynamics Simulator) to prove the efficiency of this system.

• ETRI Journal
• /
• v.42 no.3
• /
• pp.351-365
• /
• 2020

Directional sensor networks (DSNs) can significantly improve the performance of a network by employing energy efficient communication protocols. Neighbor discovery is a vital part of medium access control (MAC) and routing protocol, which influences the establishment of communication between neighboring nodes. Neighbor discovery is a challenging task in DSNs due to the limited coverage provided by directional antennas. Furthermore, in these networks, communication can only take place when the beams of the directional antennas are pointed toward each other. In this article, we propose a novel multiple token-based neighbor discovery (MuND) protocol, in which multiple tokens are transmitted based on an area exploration algorithm. The performance of the protocol is evaluated using the Cooja simulator. The simulation results reveal that the proposed MuND protocol achieves lower neighbor discovery latency, with a 100% neighbor discovery ratio, and has a relatively low communication overhead and low energy consumption.

• International journal of advanced smart convergence
• /
• v.9 no.1
• /
• pp.172-176
• /
• 2020

The implementation of a low phase noise voltage controlled oscillator (VCO) is important for the signal integrity of wireless communication terminal. A low phase noise wideband VCO for a wireless local area network (WLAN) application is presented in this paper. A 6-bit coarse tune capacitor bank (capbank) and a fine tune varactor are used in the VCO to cover the target band. The simulated oscillation frequency tuning range is from 8.6 to 11.6 GHz. The proposed VCO is desgned using 65 nm CMOS technology with a high quality (Q) factor bondwire inductor. The VCO is biased with 1.8 V VDD and shows 9.7 mA current consumption. The VCO exhibits a phase noise of -122.77 and -111.14 dBc/Hz at 1 MHz offset from 8.6 and 11.6 GHz carrier frequency, respectively. The calculated figure of merit(FOM) is -189 dBC/Hz at 1 MHz offset from 8.6 GHz carrier. The simulated results show that the proposed VCO performance satisfies the required specification of WLAN standard.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.2948-2963
• /
• 2015

In the field of computer vision, visual surveillance systems have recently become an important research topic. Growth in this area is being driven by both the increase in the availability of inexpensive computing devices and image sensors as well as the general inefficiency of manual surveillance and monitoring. In particular, the ultimate goal for many visual surveillance systems is to provide automatic activity recognition for events at a given site. A higher level of understanding of these activities requires certain lower-level computer vision tasks to be performed. So in this paper, we propose an intelligent activity recognition model that uses a structure learning method and a classification method. The structure learning method is provided as a K2-learning algorithm that generates Bayesian networks of causal relationships between sensors for a given activity. The statistical characteristics of the sensor values and the topological characteristics of the generated graphs are learned for each activity, and then a neural network is designed to classify the current activity according to the features extracted from the multiple sensor values that have been collected. Finally, the proposed method is implemented and tested by using PETS2013 benchmark data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.583-585
• /
• 2016

The recent advances in wireless networks area have led to new techniques, such as small cells or full-duplex (FD) transmission, have also been developed to further increase the network capacity. Particularly, full-duplex communication promises expected throughput gain by doubling the spectrum compared to half-duplex (HD) communication. Because this technique permits one set of frequencies to simultaneously transmit and receive signals. In this paper, we focus on the binary power control for the users and the base stations in full-duplex multiple cellulars wireless networks to obtain optimal sum-rate under the effect interference and noise. We investigate with a scenario in there one carrier is assigned to only one user in each cell and construct a model for this problem. In this work, we apply the binary power control by the its simplification in the implemented algorithm for both uplink and downlink simultaneously to maximize sum data rate of the system. At first, we realize the 2-cells case separately to check the optimal power allocation whether being binary. Then, we carry on with N-cells case in general through properties of binary power control.

• Proceedings of the KIEE Conference
• /
• 2005.10a
• /
• pp.139-144
• /
• 2005

In this paper, We are going to propose the fire protection system with using CAN(Controller Area Network). The larger, higher and deeper buildings are, the more dangerous people are when fire happens. We should be aware of the problems of prior fire protection system. Therefore, we construct embedded system based on CAN communication that is capable of N:N communication, and build independent fire protection system. If the fire is occurred on the building, the problem is that how fast we can detect the fire and put off it by using available system, this is major factor that reduces damage of our wealth, therefore in this studies We would like to design more stable system than current system. this system that is based on CAN communication which is available N:N communication constructs and is designed to compensate for each fault so that our aim is to reduce the line of system and cost of installation and to suppose future type fire protection system. We are simulated by NIST FDS(Fire Dynamics Simulator) to prove the efficiency of this system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1387-1392
• /
• 2003

For the structure of VMS by converting on digital the position reporting of departure fishery ship in the fishery communication that be required the management & operation of information in organizational. In particular, Must be made the regional & concentrational of the position reporting information. The division of region is considered to the circumstance of radio wave, fishing area, quantity of fishery ship and communication traffic etc.. It is capable to the DB of VMS by concentrate in head quarters, which is acquisition the position reporting information of respective region. In this study have designed for building of fishery information network and automatic transmission of the position reporting information from a fishery ship.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.577-578
• /
• 2010

The current marine communication networks are usually composed of NMEA0183, NMEA2000, and MiTS protocols which are located on the physical layer based on RS-422, RS-485, CAN, and EtherNet. This paper proposes a new bridge based on the DC power line communication technique supported from the NMEA0183 to design inside marine systems.

• The Journal of Society for e-Business Studies
• /
• v.24 no.2
• /
• pp.55-70
• /
• 2019

It is essential to consider the relationships between each component in the communication infrastructure in order to build and optimize the infrastructure. In this paper, based on the major factors to consider for the optimized communication infrastructure, we propose an enhanced MACSec-based deployment mechanism for communication infrastructure. The proposed MACSec mechanism can replace the IPSec without the additional devices and redesign of the communication infrastructure. In addition, we evaluate the performance of MACSec and IPSec in terms of the major factors such as message overhead, encryption processing, and host mobility. According to the evaluation results, we can say that MACSec is superior to IPSec with regard to mobility as well as hop delay and message overhead.