• Land and Housing Review
• /
• v.7 no.1
• /
• pp.9-18
• /
• 2016

This research aims to build a total information system that systematizes existing sporadic information, which may lead to revitalization and efficiency of overseas urban development. To achieve this, this study firstly analyses the current information systems for urban development in foreign countries and information from the private sector. The results show that the information system that operates in the domestic agencies, are less likely to involve the contents related to information sharing, social network building and business process. However, that used in agencies ordering the overseas urban development projects, mostly provides the information of professionals, project participants and their business. Second, this research selects the information to be provided by the integrated information system and proposes a data collection plan. The information, required to push forward urban development in abroad, is classified into seven categories. Third, this study establishes a target model of comprehensive information system and makes suggestions for institutional improvement. For doing this, it categorizes overseas urban development information, links to classified information, organizes the system into three stages to services through informational channels, and then suggests a target model. Furthermore, it proposes institutional improvement to achieve efficiency of information systems through a comprehensive review of the similar cases such as administrative system of architecture(Seumter) and land information system.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.5 s.335
• /
• pp.31-38
• /
• 2005

The architecture and the implementation details of a UTMI(USB2.0 Transceiver Macrocell Interface) compatible USB2.0 transceiver chip were presented. To confirm the validation of the incoming data in noisy channel environment, a squelch state detector and a current mode Schmitt-trigger circuit were proposed. A current mode output driver to transmit 480Mbps data on the USB cable was designed and an on-die termination(ODT) which is controlled by a replica bias circuit was presented. In the USB system using plesiochronous clocking, to compensate for the frequency difference between a transmitter and a receiver, a synchronizer using clock data recovery circuit and FIFO was designed. The USB cable was modeled as the lossy transmission line model(W model) for circuit simulation by using a network analyzer measurements. The USB2.0 PHY chip was implemented by using 0.25um CMOS process and test results were presented. The core area excluding the IO pads was $0.91{\times}1.82mm^2$. The power consumptions at the supply voltage of 2.5V were 245mW and 150mW for high-speed and full-speed operations, respectively.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.2
• /
• pp.157-165
• /
• 2005

The purpose of this study is to examine the relationship between land use patterns of riparian zones and water quality in the Geumho River watershed. A GIS database included digital land use maps (1:25,000), stream network extracted from digital topographic maps (1:5,000) and riparian zones maps by multi-buffering method. Pearson's correlation analysis was used to explain the relationship between the environmental conditions of a 30 meter buffer strip on each side and water quality. According to the result of investigation of riparian-level land use patterns, sub-watersheds on the lower Geumho River including Daegu metropolitan city were mainly developed as urban area such as residential, commercial and industrial ones, while sub-watersheds on the middle Geumho River and the main course of Nakdong River, agricultural ones such as a paddy, a dry field and an orchard. Meanwhile, the area-rate of riparian forests which play an important role in filtering nitrogen, phosphorus and sediment was estimated below the average 16%. The proportion of urban area in a 30 meter riparian bufferstrip had a negative correlation with water quality in each sub-watershed. But the proportion of forest area had a positive correlation with water quality. Henceforth, it is necessary to establish landscape planning for preparing and restoring the riparian buffer zones, concerning land form, soil type, the present land use pattern and economic aspects.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.1
• /
• pp.11-22
• /
• 2011

This study was established to build and suggest the Ecological Performance Standards for replaced wetlands as the mitigation strategies for the construction projects. The request performance and assessment factors and standards were derived by bibliographic review and verified by the field survey for the reference wetlands. And the weights for each factor were derived by AHP(Analytical Hierarchy Process) method. The results are as follows : 1) Assessment factors were induced by in-depth research of many wetland assessment models and benchmarks evaluated ecological functions. This study proposed final 12 assessment factors through ecological specialist and experts interviews added with literature analysis. 2) 10 natural wetlands were selected as Reference Wetlands as the measure to propose assessment factors and assessment criteria. Those reference wetlands are well-conserved inland natural wetlands classified to the one having worthy to conserve (grade "high") according to RAM(Rapid Assessment Method). Reference wetlands chosen by the study are Parksilji, Jeongyangji, Mulkubi, Bawineupkubi, Jilnalneup, Jinchonneup, Doomoso, Haepyung wetland, Whangjeong wetland, and Whapo wetland. The research developed assessment criteria for the performance assessment factors based on several explorations of the reference wetlands. 3) "Requiring performance" of replaced wetlands is defined as "to carry out similar or same ecological functions provided by natural wetlands", in overall. The detailed requiring performances are as follows; ${\bullet}$ to play a role of wildlife habitats ${\bullet}$ to have biological diversity ${\bullet}$ to connect with other ecosystems ${\bullet}$ to provide water environment to perform good ecological functions 4) The assessment factors for required performance are categorized by wildlife habitat function, biological diversity, connectivity of adjacent ecosystem, and water environment. Wildlife habitat category is consisted of wildlife habitat creation, size of replacement wetland, and site suitability. Biological diversity category contains the number of plant species, the number of wildlife species, and number of protected species as the sub-factors. Connectivity of adjacent ecosystem is comprised of wildlife corridor, green network and distance from other ecosystem. Finally, water environment make up with water quality, depth of water body, and shape of waterfront. 5) Finally, every assessment factors were verified and weighted by the AHP methods and the final standards were proposed. The weights of factors of requiring performance suggested as habitat (0.280), connectivity (0.261), diversity (0.260), hydraulic environment (0.199). And those of detailed sub-factors are site suitability (0.118), protected species (0.096), distance to neighbor ecosystem (0.093), habitat creating (0.091), green corridor (0.090) etc.

• Journal of Korean Society of Transportation
• /
• v.17 no.2
• /
• pp.55-68
• /
• 1999

Many ITS services require map databases in digital form to meet desired needs. Due to the dynamic nature of ITS and the sheer diversity of applications, the design and development of spatial databases to meet those needs pose a major challenge to both the public and private sectors. This challenge is further complicated by the necessity to transfer locationally referenced information between different kinds of databases and spatial data handling systems so that ITS products will work seamlessly across the region and nation. The Purpose of this paper is to develop the framework-models commonly to reference locations in the various applications and systems-the ITS Map Datum and LRS(Location Referencing System). The ITS Map Datum consists of the around control points which are the prime intersections (nodes) of the nationwide road network In this study, the major points have been determined along wish link-node modeling procedure. LRS, defined as a system for determining the position (location) of an entity relative to other entities or to some external frame of reference, has also been set up using CSOM type method. The method has been implemented using ArcView GIS software over the Kangnam and Seocho districts in the city of Seoul, showing that the implemented LRS scheme can be used successfully elsewhere. With the proper advent of the K.ITS architecture and services, the procedure can be used to improve the data sharing and to inter operate among systems, enhancing the efficiency both in terms of money and time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.5165-5176
• /
• 2010

This study is an attempt to seek ways to revitalize the main streets in local city with regard to urban regeneration. It focuses on the case of Myeong-dong Fashion Street located in front of Cheonan Station, which recently lost its vitality. In order to explore causes of the decline and solutions for restore, this paper investigate the concerned urban area by approaching through three different aspects: physical and environmental aspects, social and economic aspects, historic and cultural aspects. In addition, the street visitors were surveyed on their visiting patterns, priorities and discontents about the components of street, and preferences for its restoring, etc. The investigation resulted in following findings and proposals. In physical and environmental dimension, it is needed to create legal incentives for encouraging local residents to develop their own district, and suggested to plan green space for relaxation and cultural arts space by using existing buildings, along with the expansion of public parking. In regard of social economic aspects, it is proposed to give each street specialized commercial theme. At the historic and cultural level, it is suggested to plan the pedestrian network which links the Fashion Street with surrounding historic elements.

• Journal of Korea Multimedia Society
• /
• v.15 no.4
• /
• pp.540-551
• /
• 2012

Recently, the W3C has developed the HTML5 standard which gives the basis for providing various web applications on the web environments. Because of the advent of the smart devices and the broadband wireless network, users can accesse the web applications on the smart devices at anytime and anywhere. In addition, the demand on the multiscreen services, which enables users to use the appropriate device to their situation, has increased, since users have various smart devices. In this paper, we propose the grouping mechanism of web objects on the HTML5 based web platform, the extraction mechanism of the web object information which is used to create the web object on other devices, and the web object creation mechanism based on the received web object information. In addition, we propose the web service migration architecture between devices on the open web platform and implement the grouping, extraction and creation mechanism of the web objects on the test web document and generic web document with Chrome extension. Finally, we implement the delivery mechanism of the web object information between devices using the node.js and the WebSocket technologies.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.1 no.1
• /
• pp.6-25
• /
• 2002

In this paper, we have implemented UPnP Devices which emulate a Control Point, a Light Controller, and a Digital TV. The Control Point has been developed on Linux host system by using C language. The UPnP Devices emulating the Digital TV and Light Controller are running on embedded linux developer board. For the development of UPnP Devices, UPnP SDK API Vl.04 made by Intel Co. Ltd. has been ported on Assabet Linux Reference board to implement the UPnP protocol. After we analyze and design some services of Digital TV device, we have applied UPnP Device program to those devices. UPnP SDK vl .04 consists of APIs which support HTTP, SSDP, SOAP, GENA and XML DOM Level-1 that are cores of UPnP protocol. The C program written for the UPnP Control Point has been compiled and executed on Linux-based PC. The embedded system running on Embedded Linux OS has been connected all together through Ethernet which allows IP-based communications. Under this environment, the UPnP programs are being executed on each device. Control Point, when in operational mode, discovers UPnP Devices on the network and displays the device list on the consol. By selecting one of the functionalities of the device services that are displayed on the Control Point, the controllability has been accomplished. The experiment that we performed in this thesis have revealed that the Control Point and UPnP Devices have supported the protocols including SSDP, SOAP, GENA, and DHCP.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.3
• /
• pp.113-120
• /
• 2018

In this study, we proposed a monitoring system for identifying and handling faulty sensing stream data on manufacturing equipments where low-cost sensors can be safely used. Low cost sensors will lessen the cost of implementing distributed monitoring system, but suffer from sensor noises and inaccurate sensed data. Therefore, a distributed monitoring system with low cost sensors should identify faulty signal data as either of sensor fault or machine fault, and filter out faulty signals from sensing fault. To this end, we adopted a fourier transform based diagnostic approach mixed with a weighed moving averaging method, in order to identify faulty signals. We measured how effective our approach is and found out our approach can filter out one-third faulty signals from our experimental environment. In addition, we attached wireless communication modules to reduce sensor and network installation cost. To handle massive sensor data efficiently, we employed unstructured data format with NoSQL based database.

• Journal of Korean Society of Rural Planning
• /
• v.22 no.4
• /
• pp.1-11
• /
• 2016

Public transportation is public service that is contributed to the convenience of the public. However, opportunity for public services in rural areas is weaker than the chance in urban areas. The purpose of this study is to evaluate accessibility of various public facilities using public transportation. To evaluate the accessibility, we calculate the various time from community center to the nearest bus stop, walking time, riding time in bus, and waiting time for transfer. The results of this study ares as follows; (1) Villages occupy 19.8% in rural areas that walking time from community center to the nearest bus stop takes over 10 minutes in integrated Chungju-si; (2) The average speed is 21.9 km/hr estimated to departure and arrival time of bus route; (3) The accessibility time from community center using the average bus speed takes 15.43 minutes to public facilities, 35.15 minutes to emergency center, 8.70 minutes to medical center, 9.70 minutes to elementary school, 16.26 minutes to middle school, and 22.61 minutes high school; (4) The transfer time of public transportation takes 13.46, 21.96, 10.48, 7.78, 11.11, 16.10 minutes to public facilities, emergency center, medical center, elementary school, middle school, and high school, respectively; (4) Traffic accessibility using bus vehicles in the East and South Chungju-si is lower than areas in the West and North Chungju-si. Some villages surrounding public offices (eup-myeon office) which have a high density of population, indicate a high traffic accessibility.