• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.9 s.351
• /
• pp.60-68
• /
• 2006

Using the wireless communication among unacquainted vehicles, an intelligent vehicle safety system can be constructed to exchange vehicle safety-related information, such as urgency stop, traffic accident and road obstacles. In the majority of vehicle safety applications, vehicle safety messages are propagated in the form of broadcast. However, this approach causes some effectiveness and performance problems with massive radio collision, multi-hop propagation. This paper presents a priority based relay node selection method for propagating vehicle safety messages of traffic accident protection system. With this method, vehicle safety messages are relayed by a node that locates in proper distance out of the nodes that are included in the radio transmission range. By decreasing the number of duplicated messages, the packet overhead is lessened while the communication performance is raised. The proposed method was proven to be better than other schemes through network simulations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.904-911
• /
• 2011

This paper deals with transmission characteristics of a new dual resonant structure for designing waveguide band-pass filter. The structure which has a pass-band between two adjacent stop-bands in a single body consists of circular ridged aperture and four armed conducting patch. The dual resonant behavior of the structure can be represented by a combination of LC series and parallel resonant circuits. Also these resonant properties can be easily controlled by varying the geometry of the aperture and four armed conducting patch. Actually, the structure is fabricated on the microstrip substrate by use of etching technique so that it is formed an iris type resonator which can be easily put into the transverse plane of the waveguide. We use WR-90 standard waveguide, adapters, and VNA(vector network analyzer) to measure the resonant characteristics of the structure. It is very useful to design and to improve the cutoff skirts characteristics in the waveguide band-pass filter design area.

• Journal of Broadcast Engineering
• /
• v.13 no.6
• /
• pp.951-961
• /
• 2008

Cooperative diversity is a cooperative technique which exploits user diversity by decoding the combined signal of the relayed signal and the direct signal in wireless multi-hop networks. Using the cooperation, the performance of the network system can be improved because cooperative diversity which is very strong against the fading channels can be achieved. In this paper, we propose the technique that provides the enhanced visual quality of the reconstructed video using the cooperative diversity with the FMO which is the error resilience tool of H.264/AVC standardization over wireless networks. The eye-tracker can detect the gaze point of user and transmit the gaze information to the nodes. After receiving the gaze information of user, each node performs ROI encoding according to the received gaze information. After encoding, video sources are divided into ROI and Non-ROI. Through the simulation results, the better visual quality of the reconstructed video is achieved when ROI and Non-ROI are transmitted through different channels.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.2E
• /
• pp.32-40
• /
• 1994

It is the purpose of this paper to describe the methods for establishing loudness ratings and talker echo out of transmission quality of ISDN telephone connected to fully digital network. In order to design the desirable loudness ratings and talker echo for ISDN telephone, the model system of digital speech communication for subjective tests is developed. Using this model system, opinion tests which decide the optimal CODEC input level, the range of overall loudness rating, sidetone masking rating and talker echo are performed. From the results of tests, we decided that the loudness ratings are 6 to 8dB for sending, 0 to 2dB for receiving, and 8 to 12dB for sidetone masking rating. And, the terminal coupling loss of TCLw of at least 40dB is necessary to provide echo-free telephone communications to telophone users when the overall loudness rating of ISDN telephone is normalized to 10dB.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.1
• /
• pp.53-64
• /
• 2009

For a realization of the ubiquitous society, applying IT to vehicle industry has recently been an attractive issue to make wireless communication in body area network possible to everywhere. In this paper, we propose the physical layer symbol structure based on PPM scheme of the IEEE 802.15.4a for the off-body high data rate WBAN system. We propose four symbol structures which is classified according to the number of the chip and whether the channel coding is used or not. We calculate the required SNR through the link budget calculation and the recently proposed off-body WBAN channel environment was applied in the simulation. The results of four systems show that small number of burst's chip enhances the performance and the system is capable to achieve the data rate of 10 Mbps.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.7-12
• /
• 2014

The data forwarding transmission is an important function of the relay in cooperative communication in wireless communication systems. However, additional relay cause the waste of power consumption and cost. Therefore, in this paper, we consider how to use the user mobile devices in stead of relays to deal with this problem. In this paper, we proposed the protocol that divide each relay into two states of idle and non-idle. The receiver has two functions of base station and user mobile device. In this case, it is possible that no additional cost, and improve the spectral efficiency and network capacity. We verified BER performance for the proposed protocol over Rayleigh fading through Monte-Carlo simulation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.209-214
• /
• 2017

A plane-wave incident upon asymmetric multi-layered dielectric grating as well as symmetric grating structure generates space harmonics. Selected space harmonics among those harmonics can undergo strong resonance scattering variations known as GMR(guided-mode resonance). In this paper, to clarify these effects, the field propagation and dispersion curve inside the grating region are analyzed by using a rigorous equivalent transmission-line theory(RETT) based on eigenvalue problem. The results show that, at the peak of a scattering resonance, the reflected mode is almost identical to a leaky wave that can be supported by the grating structure. Thus, it confirms to be occurred GMR effect associated with the free-resonant character of leaky waves at asymmetric multi-layered dielectric gratings. Quantitative simulation results illustrating the behavior of typical gratings are given, and the special case of normal incidence is discussed for TE and TM modes.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.11
• /
• pp.67-78
• /
• 2005

In this paper, impedance characteristics of overhead medium-voltage (MV) power line for power line communication (PLC) is analyzed. For analysis, a two-port equivalent network model of MV power lines is derived. By applying the equivalent model and basic transmission line theory, input impedance at the signal induction part is calculated. And also calculated input impedance of power line itself that the medium voltage coupler and coaxial cable effect are removed. For verification, impedance of power lines is measured at a test field for an MV PLC. The results show that impedance of MV power line itself is between $200\;{\Omega}\;and\;300\;{\Omega}$ and converges to a half of their characteristic impedance with increasing frequency. And also measured data is very similar to calculated data.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.8
• /
• pp.68-76
• /
• 1998

In this paper, a new morphological image segmentation algorithm of hierarchical structure by binary split is proposed. It splits a region with the lowest quality into two regions using only two markers having the highest contrast. Therefore, it improves the quality of image with limited regions and reduces contour information which is not sensitive to human visual system, when compared with the conventional algorithm. It is appropriate to PSTN, LAN, and mobile networks, of which the available transmission bandwidth is very limited, because the number of regions can be controlled. And the proposed algorithm shows very simple structure because it doesn't need post processing to eliminate small regions and reduces much computation by using only structuring element of small size at simplification step of each hierarchical structure when compared with the conventional algorithm.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2391-2399
• /
• 2014

Novel dual responsive pectin hydrogels composed from poly(acrylamidoglycolic acid-co-vinylcaprolactam)/Pectin (PAV-PC) and also PAV-PC hydrogels are used as templates for the production of silver nanoparticles. 5-Fluorouracil is an anticancer drug and has been loaded in situ into PAV-PC hydrogels. Structure and morphology characterization of PAV-PC hydrogels were investigated by fourier transform infrared spectroscopy, differential scanning calorimetry, thermo gravimetric analysis, X-ray diffraction studies, scanning electron microscopy and transmission electron microscopy. The results revealed a molecular level dispersion of the drug in PAV-PC hydrogels. In vitro release of 5-fluorouracil from the PAV-PC hydrogels has been carried out in GIT fluids as well as in various temperatures. 5-Fluorouracil released from PAV-PC hydrogels was 50% at pH 1.2, and 85% at pH 7.4 within 24 h. The release profile was characterized with PAV-PC hydrogels and initial burst effect was significantly reduced in two buffer media (1.2 and 7.4), followed by a continuous and controlled release phase, the drug release mechanism from polymer was due to Fickian diffusion. In situ fabrication of silver nanoparticles inside the hydrogel network via the reduction of sodium borohydrate by PAV-PC chains led to hydrogel nanocomposites. The diameter of the nanocomposites was about 50-100 nm, suitable for uptake within the gastrointestinal tract due to their nanosize range and mucoadhesive properties. These nanocomposite PAV-PC hydrogels showed strong antimicrobial activity towards Bacillus subtilis (G+ve) and Escherichia coli (G-ve).