• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8B
• /
• pp.630-635
• /
• 2008

Recently, in order to improve the energy efficiency of WSN(Wireless Sensor Network), widely research have teen carried on. But, up to the present, Majority of methods are based on direct communication between CH(cluster head) and sink node, and based on the assumption that node can regulate signal energy actively according to the distance between nodes. So it's hard to implement those methods. Based on the theory that node has fixed radio wave radius, this paper present a multi leveling routing protocol. According to the simulation of the presented protocol, we have proved the energy saving efficiency and the implementation in real WSN.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1148-1161
• /
• 2012

Recently, developments in the field of communication and network technologies induced new paradigm in the defense weapon system. As a consequence, military authorities develop the Tactical Information Communication Network(TICN) system to adapt to the changing paradigm. One of the most important functions of TICN is real-time communication. As a result, TICN system needs to receive real-time information from the battlefield, and the key technology to support these features is MANET(Mobile Ad-Hoc Network) routing protocol. In this paper, we analyze problems of the shortest path scheme in tactical Ad-Hoc networks, which is widely used in common Ad-Hoc networks. We propose efficient routing protocol for tactical MANET by considering the environment of small combat units, such as node position, speed and data size. The proposed algorithm shows reliable data transfer and low latency in battlefield.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.1
• /
• pp.83-90
• /
• 2010

DTNs (Delay Tolerant Networks) refer to the networks that can support data transmission in the extreme networking situations such as continuous delay and no connectivity between ends. DTMNs (Delay Tolerant Networks) are a specific range of DTNs, and its chief considerations in the process of message delivery in the routing protocol are the transmission delay, improvement of reliability, and reduction of network loading. This article proposes a new LCN (Largest Common Neighbor) routing algorism to improve Spray and Wait routing protocol that prevents the generation of unnecessary packets in a network by letting mobile nodes limit the number of copies of their messages to all nodes to L. Since higher L is distributed to nodes with directivity to the destination node and the maximum number of common neighbor nodes among the mobile nodes based on the directivity information of each node and the maximum number of common neighbor nodes, more efficient node transmission can be realized. In order to verify this proposed algorism, DTN simulator was designed by using ONE simulator. According to the result of this simulation, the suggested algorism can reduce average delay and unnecessary message generation.

• International journal of advanced smart convergence
• /
• v.8 no.2
• /
• pp.109-115
• /
• 2019

Currently, LPWA(Low Power Wide Area) communication technology is widely used due to the development of IoT(Internet of Things) technology. Among the LPWA technologies, LoRaWAN(Long Range Wide Area Network) is widely used in many fields due to its wide coverage, stable communication speed, and low-cost modem module prices. In particular, LoRa(Long Range) can easily construct LoRaWAN with a dedicated gateway. So many organizations are building their own LoRaWAN-based networks. The LoRaWAN Gateway receives the LoRa packet transmitted from an End-device installed in the adjacent location, converts it into the Internet protocol, and sends the packet to the final destination server. Current LoRa Gateway uses a single-hop method, and each gateway must include a communication network capable of the Internet. If it is the mobile communication(i.e., WCDMA, LTE, etc.) network, it is required to pay the internet usage fee which is installed in each gateway. If the LoRa communication is frequent, the user has to spend a lot of money. We propose an idea on how to design a multi-hop protocol which enables packet routing between gateways by analyzing the LoRaWAN communication method implemented in its existing single-hop way in this paper. For this purpose, this paper provides an analysis of the standard specification of LoRaWAN and explains what was considered when such protocol was designed. In this paper, two gateways have been placed based on the functional role so as to make the multi-hop protocol realized: (i) hopping gateway which receives packets from the end-device and forwards them to another gateway; and (ii) main gateway which finally transmits packets forwarded from the hopping gateway to the server via internet. Moreover, taking into account that LoRaWAN is wireless mobile communication, a level-based routing method is also included. If the protocol proposed by this paper is applied to the LoRaWAN network, the monthly internet fee incurred for the gateway will be reduced and the reliability of data transmission will be increased.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.2
• /
• pp.213-218
• /
• 2006

In this paper, we evaluate and compare performance between position-based and non-position-based routing protocols in a vehicular ad-hoc network. The protocols evaluated in this paper for many performance evaluation aspects are a position-based routing protocol, GPSR (Greedy Perimeter Stateless Routing), and the non-position-based such as AODV (Ad-hoc On-Demand Distance Vector) and DSR (Dynamic Source Routing) protocols. The three protocol characteristics such as Packet Delivery Ratio, Latency of first packet per connection, and Average number of hops depending on distance are compared and evaluated. As the result of simulation, the AODV performed better than the DSR. However, due to the high mobility characteristic of a vehicular ad-hoc network, GPSR, the position-based routing performs better than the non-position-based routing protocols such as AODV and DSR in a vehicular ad-hoc network environment.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.9
• /
• pp.677-683
• /
• 2006

If a node stops functioning in an ad-hoc wireless network, routing paths involving the node will also fail, when construction of replacement routes is required. A major cause of node failure is energy exhaustion, and route replacements may in turn lead to successive node failures by making more nodes consume their energy. The result could be performance degradation of networks. Therefore it is important to ensure that nodes with limited remaining energy are not included in route construction from the beginning. In this paper we propose a new routing protocol, which takes residue energy of nodes into account in order to prevent node failures resulting from energy shortage. Our routing protocol examines the smallest value of node residue energy ($E_{m}$) from each of all possible routing paths and selects the path which has the largest value of $E_{m}$. We prove, through simulation, that our routing protocol extends the lifetime of nodes which have limited amount of energy, reducing chances of path replacement. It is also shown that our proposed protocol helps alleviate network performance degradation.

• The Journal of the Korea Contents Association
• /
• v.7 no.11
• /
• pp.111-119
• /
• 2007

Sensor networks are needed for special purposes such as collecting or transmitting information by using sensor devices, for which various routing protocols have been proposed. Among existing protocols, the modified PEGASIS routing technique is known to be effective when applied to cases with directional transmissions of data. However it does not consider recovery from errors or guaranteeing stability in data transmission, while sensor devices performing repetitive relays and controls are prone to errors. In this paper, a double relay routing protocol for Zigbee based sensor networks where data are transfered reliably with a linear direction. The proposed protocol is effective in the sense that it secures the relaible transmission of data with minimal energy consumption based on a directional data transfer. A streetlight control system has been presented as an application of the proposed protocol.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1903-1911
• /
• 2016

As interest in MANET is increasing nowadays, research upon an efficient MANET routing protocol is actively under way. A LQA(Link Qualty Aware)-AODV routing protocol to deal with frequent changes of topology and wireless link variations under tactical operating conditions is proposed in this paper. The suggested LQA-AODV takes into account the channel capacity of each hop during the route request process of the traditional AODV protocol. In detail, LQA-AODV adds a channel capacity cost value to the RREQ message format that occurs during the routing process of the existing AODV Routing Protocol causing the accumulated channel capacity cost values of each sections to be compared before establishing a route. To verify the performance of LQA-AODV, NS2.35 was utilized and the Link-Quality Model was applied in order to reflect the tactical wireless environment. The simulation compares and analyzes LQA-AODV and the existing AODV, showing a large improvement over the traditional AODV in regards to the Packet Delivery Ratio, and End-to-End Delay.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.10
• /
• pp.2658-2681
• /
• 2023

In edge computing scenarios, IoT end devices play a crucial role in relaying and forwarding data to significantly improve IoT network performance. However, traditional routing mechanisms are not applicable to this scenario due to differences in network size and environment. Therefore, it becomes crucial to establish an effective and reliable data transmission path to ensure secure communication between devices. In this paper, we propose a trusted path selection strategy that comprehensively considers multiple attributes, such as link stability and edge cooperation, and selects a stable and secure data transmission path based on the link life cycle, energy level, trust level, and authentication status. In addition, we propose the Stability-based On-demand Multipath Distance Vector (STAOMDV) protocol based on the Ad hoc AOMDV protocol. The STAOMDV protocol implements the collection and updating of link stability attributes during the route discovery and maintenance process. By integrating the STAOMDV protocol with the proposed path selection strategy, a dependable and efficient routing mechanism is established for IoT networks in edge computing scenarios. Simulation results validate that the proposed STAOMDV model achieves a balance in network energy consumption and extends the overall network lifespan.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.205-206
• /
• 2006

In this paper, we have proposed an ad-hoc routing protocol named "RRMR (Reliable and Resilient Multipath Routing)" that is expanded from AODV to acquire multiple path at one time. This protocol needs less overhead to configure data routing paths and the paths are maintained to transmit data stably. To get these advantages, RRMR protocol is constructed by expanding from multipath acquiring and maintaining method based on distance vector method and hop-by-hop routing of AODV.