• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.4
• /
• pp.2002-2019
• /
• 2017

RPL routing protocol for low-power and lossy networks is an Internet Engineering Task Force (IETF) recommended IPv6 based protocol for routing over Low power Lossy Networks (LLNs). RPL is proposed for networks with characteristics like small packet size, low bandwidth, low data rate, lossy wireless links and low power. RPL is a proactive routing protocol that creates a Directed Acyclic Graph (DAG) of the network topology. RPL is increasingly used for Internet of Things (IoT) which comprises of heterogeneous networks and applications. RPL proposes a single path routing strategy. The forwarding technique of RPL does not support multiple paths between source and destination. Multipath routing is an important strategy used in both sensor and ad-hoc network for performance enhancement. Multipath routing is also used to achieve multi-fold objectives including higher reliability, increase in throughput, fault tolerance, congestion mitigation and hole avoidance. In this paper, M-RPL (Multi-path extension of RPL) is proposed, which aims to provide temporary multiple paths during congestion over a single routing path. Congestion is primarily detected using buffer size and packet delivery ratio at forwarding nodes. Congestion is mitigated by creating partially disjoint multiple paths and by avoiding forwarding of packets through the congested node. Detailed simulation analysis of M-RPL against RPL in both grid and random topologies shows that M-RPL successfully mitigates congestion and it enhances overall network throughput.

• Journal of Communications and Networks
• /
• v.15 no.3
• /
• pp.301-311
• /
• 2013

This paper proposes a policy-based quality of service (QoS) management framework for adaptive routing decisions. We present an approach considering interior gateway protocol (IGP) for path discovery mechanisms and QoS-aware policies for configuring the network elements. The integration of the aforementioned modules into this policy-based network management (PBNM) system is demonstrated by conducting experiments in a real environment, the hellenic public administration network SYZEFXIS. These experiments combine different traffic conditioning mechanisms through event detectors, consider IP service level agreement mechanisms that interoperate with the PBNM system and analyze the enforcement of IGP and QoS policies. Finally, validation and measurement tools are used to prove the efficiency of this framework. It is shown that this architecture offers significantly increased performance and learning capabilities, while the PBNM system achieves adaptive QoS routing through automated configuration considering the avoidance of suboptimal routing issues or under-performance conditions of the network entities.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.657-658
• /
• 2015

In an wireless sensor network, energy efficient routing protocol is important for multi-hop transmission because senor nodes are powered by battery. In multi-hop transmission, specifice nodes are used and the battery power becomes low, it induce the asymetric remaining power among the nodes and makes the network lifetime reduced. In this paper, we propose a power-aware routing protocol which determines the routing path considering the remaining power of the nodes. Simulation results shows that the proposed routing scheme minimize the transmission delay and increase the network lifetime.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.3
• /
• pp.101-109
• /
• 2011

In this paper, we present a new routing protocol, multipath and multi-priority based routing protocol, (MMRP) for wireless multimedia sensor networks. The proposed MMRP chooses the multiple routing paths from source to the sink, then the selected paths are assigned with different priority levels depending upon the residual energy and transmission delay in the routing paths. That is, the highly prioritized I frames of the MPEG video are transmitted over the high priority routing paths, and other P and B frames are transmitted over the lower priority routing paths. The proposed MMRP protocol can be applied to time critical applications which require both lower latency and low power consumption over wireless multimedia sensor network. Simulations results of MMRP protocol show respectively an improvement of 23.48% and 23.11% in energy conservation and 81.6% and 32.01% improvement in latency as compared to protocols without and with multipath routing.

• Journal of KIISE:Information Networking
• /
• v.33 no.4
• /
• pp.299-309
• /
• 2006

In Mobile ad hoc networks, AODV is one of the famous on-demand routing protocol, which use the routing tables in the nodes if possible, or Route Discovery Process (RDP) is triggered to find a new route. However increasing the traffic of RDP causes dropping of the network performance in the large size of ad hoc networks. In this paper, we propose a novel routing protocol, named as AOZDV (Ad hoc On-demand Zone and Distance-Vector Routing), which enhances the AODV protocol with zone routing. AOZDV creates a Zone with neighbor nodes of the source/destination using traffic and power information, and utilizes Destination-Vector Table for internal routing in the Zone. We show by simulations that AOZDV can reduce the occurrence rate of route fail and RDP caused by route fail compared to existing routing protocols such as DSR and AODV.

• Journal of Korea Multimedia Society
• /
• v.24 no.8
• /
• pp.1068-1075
• /
• 2021

Wireless sensor network (WSN) can be usefully used in battlefields requiring rapid installation and operation by enabling surveillance and reconnaissance using small sensors in areas where any existing network infrastructure is not formed. As WSN uses battery, energy efficiency acts as a very important issue in network survivability. Layer-based routing protocols have been studied a lot in the aspect of energy efficiency. Many research selected LEACH and PEGASIS protocols as their comparison targets. This study examines the two protocols and LECEEP, a protocol designed by combining their advantages, and proposes a new protocol, A-LECEEP, which is more energy efficient than the others. The proposed protocol can increase energy efficiency compared to the existing ones by eliminating unnecessary transmissions with multiple chains configuration.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1357-1362
• /
• 2009

The multimedia contents are diffused rapidly. Also, the course individual service of communication and broadcasting coexists with each other and develop to the integrated fusion service with development of the high speed broadband IP network technology. The IPTV which is representative broadcasting a communication total service is the powerful application field. The communication industry has been interested in data processing of the high-definition that supports many kinds of internet service by internet protocol. In this paper, we configure the standard routing protocol use in the small scaled, on RIP environment and the link status routing protocol use the large scale autonomous network, on OSPF environment. We also measure and evaluate broadcasting quality by PSNR(Peak Signal-to-Noise Ratio). Finally, we propose the network construction plan for IPTV services which are efficient.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.1
• /
• pp.1-14
• /
• 2010

It is recently issued scalability, mobility and external internet connection on Wire-less sensor network. The low power wireless sensor networks based on IPv6 technology 6LoWPAN technology is being standardized in the IETF. This paper for the 6LoWPAN environment based on the routing protocol LOAD, route cost applied the packet re-transmission rate which follows in Link Qualities price which uses at course expense and packet transmission Minimum route Cost routing protocol where does on the course wherethe smallest packet re-transmission becomes accomplished proposed. The technique which proposes compared and LOAD and AODV that about 13%, about 16% energy consumption is few respectively averagely, Energy of the entire network equally, used and energy effectiveness and improvement of network life time experiment led and confirmed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3A
• /
• pp.269-278
• /
• 2010

There are tendency that wireless sensor network is one of the important techniques for the future IT industry and thereby application areas in it are getting growing. Researches based on the hierarchical network topology are evaluated in good at energy efficiency in related protocols for wireless sensor network. LEACH is the best well known routing protocol for the hierarchical topology. However, there are problems in the range of message broadcasting, which should be expand into the overall network coverage, in LEACH related protocols. This dissertation proposes a new routing protocol to solve the co-shared problems in the previous protocols. The basic idea of our scheme is using the table for nodes connectivity and node energy information. The results show that the proposed protocol could support the load balancing by distributing the clusters with a reasonable number of member nodes and thereby the network life time would be extended in about 1.8 times longer than LEACH.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12A
• /
• pp.1226-1237
• /
• 2007

This paper proposes QoS mesh routing protocol for IEEE 802.16 based wireless mesh networks. QoS mesh routing protocol proposed in this paper is a proactive hop-by-hop QoS routing protocol. The goal of our routing protocol is not only to find a route from a source to a destination, but also optimal route that satisfies QoS requirements, given in terms of bandwidth and delay as default QoS parameters. In this paper, we first analyze possible types of routing protocols that have been studied for MANET and show proactive hop-by-hop routing protocols are the most appropriate for wireless mesh networks. Then, we present a network model for IEEE 802.16 based wireless mesh networks and propose a proactive hop-by-hop QoS routing protocol. Through our simulation, we represent that our routing protocol outperforms QOLSR protocol in terms of end-to-end delay, packet delivery ratio and routing overhead.