• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1363-1372
• /
• 2011

Flooding based routing protocols are usually used to disseminate information in wireless sensor networks. Those approaches, however, require message retransmissions to all nodes and induce huge collision rate and high energy consumption. In this paper, HoGoP (Hop based Gossiping Protocol) in which all nodes consider the number of hops from sink node to them, and decide own gossiping probabilities, is introduced. A node can decide its gossiping probability according to the required average reception percentage and the number of parent nodes which is counted with the difference between its hop and neighbors' ones. Therefore the decision of gossiping probability for network topology is adaptive and this approach achieves higher message reception percentage with low message retransmission than the flooding scheme. Through simulation, we compare the proposed protocol with some previous ones and evaluate its performance in terms of average reception percentage, average forwarding percentage, and forwarding efficiency. In addition, average reception percentage is analyzed according to the application requirement.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.5
• /
• pp.133-142
• /
• 2004

Recently, the growth of Internet and a variety of multimedia services through Internet increasingly demands high-speed packet transmission, the new routing function, and QoS guarantee on conventional routers. Thus, a new switching mechanical called the MPLS(Multi-Protocol Label Switching), was proposed by IETF(Internet Engineering Task Force) as a solution to meet these demands. In addition the deployment of MPLS network supporting Differentiated Services is required. In this paper, we propose the architecture of the MPLS switch supporting Differentiated Services in the MPLS-based network. The traffic conditioner consists of a classifier, a meter, and a marker. The VOQ-PHB module, which combines input Queue with each PHB queue, is implemented to utilize the resources efficiently. It employs the Priority-iSLIP scheduling algorithm to support high-speed switching. We have designed and verified the new and fast hardware architecture of VOQ-PHB and the traffic conditioner for QoS and high-speed switching using NS-2 simulator. In addition, the proposed architecture is modeled in VHDL, synthesized and verified by the VSS analyzer from SYNOPSYS. Finally, to justify the validity of the hardware architecture, the proposed architecture is placed and routed using Apollo tool.

• The KIPS Transactions:PartC
• /
• v.8C no.5
• /
• pp.637-646
• /
• 2001

The multicasting telecommunication is an important research as an applicable technique in the development of adaptable technique for modern mobile computing and mobile IP, because that is supposed to be a solution for transferring the large-size information on the mobile and wireless network with the narrow bandwidth. This paper will suggest one solution for the bidirectional tunneling and the local re-registration problems to support transferring mobile multicasting datagram by the partitioned network. The bidirectional tunneling technique is in use for mobile host moving around in a region and the local re-registration technique for crossing regions to reduce traffic load caused by transferring datagram along a long distance, and we compare those models with our suggested model by simulation.

• The KIPS Transactions:PartC
• /
• v.15C no.6
• /
• pp.539-546
• /
• 2008

In this paper, we propose an address autoconfiguration mechanism and a route establishment mechanism appropriate for the modified MANET architecture which overcomes the multi-link subnet problem. For the delivery of Router Advertisement (RA) messages without causing the duplicate packet reception problem in the multi-hop wireless network environment, the Scope-Extended RA (Scope-Extended Router Advertisement) message is defined. Also, by defining the MANET Prefix option, a MANET node is allowed to send packets destined to a host not in the MANET directly to the gateway. This can prevent the performance degradation caused by broadcasting control messages of the reactive routing protocol for route establishment. The performance of the proposed mechanism is analyzed through NS-2 based simulations and, according to the simulation results, it is shown that the proposed mechanism performs well in terms of the control message overhead.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.10
• /
• pp.41-48
• /
• 2001

It is necessary to provide the QoS guaranteed end to-end routing services using the internet protocol through the connectionless network based on high speed network. From the above necessities, this paper classified the existing traffic into two type traffics such as real time traffics and non real time traffics and proposes the ATM based IP switching method with traffic type VC merging which allows many routes according to traffic type to be mapped to the same VC label. And this paper suggests the optimum switching architecture through simulation and performance analysis of proposed VC merging output module. From the simulation results, we confirmed the performance of the proposed method better than existing VC merging system under mixed traffic circumstances.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.68-76
• /
• 2008

It is difficult to maintain mutes in the mobile ad hoc network (MANET) due to the high probability of disconnected routes break by frequent change of topology. The links can have the different reliability about data transmission due to these characteristics. Hence a measure which can evaluate this reliability and a algorithm which reflects this are required. In this paper, we propose routing algorithm based on reliability about transmission. First the bayesian inference which infers the hypothesis by past information is considered to obtain the link's transmission reliability. The other is that the link-based reliability estimation model which considers each link's reliability additionally is proposed while the standard uses only Dijkstra's shortest path algorithm. the simulation results using NS-2 show that the performance of proposed algorithm is superior to the standard OLSR in terms of throughput and stability.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.590-598
• /
• 2018

Recently, interest in IoT(Internet of Things) technology, which provides Internet services to objects, is increasing. IoT offers a variety of services in home networks, healthcare, and disaster alerts. IoT with LLN(Low Power & Lossy Networks) feature frequently loses sensor node. RPL, the standard routing protocol of IoT, performs global repair when data loss occurs in a sensor node. However, frequent loss of sensor nodes due to lower sensor nodes causes network performance degradation due to frequent full path reset. In this paper, we propose an additional selection method of the storage mode sensor node to solve the network degradation problem due to the frequent path resetting problem even after selecting the storage mode sensor node, and propose a method of equalizing the total path resetting number of each instance.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.6
• /
• pp.9-17
• /
• 2012

High-quality multimedia on the Internet has attracted attention because of its wide application area. IP multicast has been proposed as a solution to use efficient network resources in these services. However, IP multicast has not been commonly used due to a number of practical issues such as security and management. As an alternative, an overlay multicast routing which is performed in upper protocol layers on legacy networks without changing hardware has been presented. Yet, the maximum data transmission capacity of the overlay multicast is not sufficient for real time transmission of multimedia data. In this paper, we have implemented an overlay multicast engine on NetFPGA which allows us to perform packet replication and tunneling which need high-speed. In addition, we have implemented extra portions which need low-speed in software. From now on, we will progress research which increase the number of terminal spots which can be replicated by improvement and amplify throughputs by optimization.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.3
• /
• pp.73-78
• /
• 2019

Due to frequent topology changes in wireless networks, inter-node link disconnection and path re-establishment occur, causing problems such as overloading control messages in the network. In this paper, to solve the problems such as link disconnection and control message overload, we perform path setup in three steps of the neighbor node discovery process, the route discovery process, and the route management process in the wireless network environment. The link stability value is calculated using the information of the routing table. Then, when the zone master monitors the calculated link value and becomes less than the threshold value, it predicts the link disconnection and performs the path reset to the corresponding transmitting and receiving node. The proposed scheme shows a performance improvement over the existing OLSR protocol in terms of data throughput, average path setup time, and data throughput depending on the speed of the mobile node as the number of mobile nodes changes.

• Annual Conference of KIPS
• /
• 2010.11a
• /
• pp.863-866
• /
• 2010

무선 센서 네트워크의 규모가 커짐에 따라 대규모의 센서 네트워크의 활용에 대한 기대가 커지고 있다. 기존 IEEE 802.15.4 를 이용한 네트워크의 규모에 따른 한계를 극복하기 위해 듀얼 라디오 센서 네트워크에 대한 많은 연구가 진행되고 있다. 듀얼 라디오 센서 네트워크는 단일 라디오를 내장한 전통적인 센서 노드(싱글 라디오 노드)에 듀얼 라디오 인터페이스(IEEE 802.11g, IEEE 802.15.4)를 내장한 센서(듀얼 라디오 노드)를 포함하여 클러스터를 구성한다. 본 논문에서는 이러한 듀얼 라디오 환경에서 효과적으로 동작하는 라우팅 프로토콜을 제안한다. 듀얼 라디오 노드는 네트워크 상에서 클러스터 헤드 역할을 하고 상위 계층을 이루며, 일반 노드는 클러스터 멤버 역할을 하는 하위 계층을 이룬다. 본 논문에서는 각 계층의 네트워크가 나타내는 특징을 이동성이 적거나 높은 네트워크의 특징으로 대입하여, 상위 계층에는 Pro-Active 프로토콜, 하위 계층에는 Re-active 프로토콜이 효과적임을 설명한다. 이를 바탕으로 듀얼 라디오 센서 네트워크에 적합한 라우팅 프로토콜로써 Pro-Active 프로토콜을 대표하는 DSDV 와 Re-Active 프로토콜을 대표하는 AODV 를 조합한 하이브리드 라우팅 프로토콜을 제안한다. 제안한 프로토콜의 성능을 확인하기 위해 센서네트워크 테스트베드를 구성하여 라우팅 복구 시간과 패킷 전송 안정성에 대한 성능을 입증한다.