• Journal of Information Processing Systems
• /
• v.17 no.1
• /
• pp.63-74
• /
• 2021

According to the double-phase cluster-head election method (DCE), the final cluster heads (CHs) sometimes are located at the edge of cluster. They have a long distance from the base station (BS). Sensor data is directly transmitted to BS by CHs. This makes some nodes consume much energy for transmitting data and die earlier. To address this problem, energy efficient multi-hop cluster-head election strategy (EEMCE) is proposed in this paper. To avoid taking these nodes far from BS as CH, this strategy first introduces the distance from the sensor nodes to the BS into the tentative CH election. Subsequently, in the same cluster, the energy of tentative CH is compared with those of other nodes, and then the node that has more energy than the tentative CH and being nearest the tentative CH are taken as the final CH. Lastly, if the CH is located at the periphery of the network, the multi-hop method will be employed to reduce the energy that is consumed by CHs. The simulation results suggest that the proposed method exhibits higher energy efficiency, longer stability period and better scalability than other protocols.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.34-41
• /
• 2017

Wireless mesh networks contain multi-hop routing protocols between wireless nodes and are connected to the Internet through a gateway. These networks perform a role as a backbone and are scalable for main applications. We propose the design of QoS supporting mechanisms for wireless mesh networks using software defined networking. Our proposed scheme is cost-effective and features adaptive QoS mechanisms for wireless router's resource constraints. The QoS mechanisms use software defined networking technology with Openflow protocol based on diffserv and intserv models with MPLS mechanism and RSVP respectively. A performance evaluation model is suggested to verify the validity of the proposed scheme using several QoSmetrics of the wireless mesh networks.

• The KIPS Transactions:PartC
• /
• v.14C no.4
• /
• pp.365-370
• /
• 2007

Connected Dominating Set(CDS) has been used as a virtual backbone in wireless ad hoc networks by numerous routing and broadcast protocols. Although computing minimum CDS is known to be NP-hard, many protocols have been proposed to construct a sub-optimal CDS. However, these protocols are either too complicated, needing non- local information, not adaptive to topology changes, or fail to consider the difference of energy consumption for nodes in and outside of the CDS. In this paper, we present two Timer-based Energy-aware Connected Dominating Set Protocols(TECDS). The energy level at each node is taken into consideration when constructing the CDS. Our protocols are able to maintain and adjust the CDS when network topology is changed. The simulation results have shown that our protocols effectively construct energy-aware CDS with very competitive size and prolong the network operation under different level of nodal mobility.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5B
• /
• pp.274-286
• /
• 2005

In this paper, we propose a new power-efficient and reliable connected dominating set based routing protocol in the mobile ad hoc networks. Gateway nodes must be elected in consideration of residual energy and mobility because frequent reconstruction of connected dominating set result in transmission error for route losses. If node density is high, it results in a lot of contentions and more delays for network congestion. Therefore, in this paper, we propose a new construction method of connected dominating set that supports reliable and efficient data transmission through minimizing reconstruction of connected dominating set by delaying neighbor set advertisement message broadcast in proportion to weighted sum of residual energy, mobility, and the number of neighbor nodes. The performance of the proposed protocol is proved by simulation of various conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11B
• /
• pp.772-783
• /
• 2005

In this paper, we propose an effective multicasting protocol in wireless ad-hoc networks. Conventional wired and wireless network multicast protocols do not perform well in wireless ad hoc networks because they were designed without consideration of ad hoc environments such as node mobility, limited bandwidth, high error probability. To solve this problem, some multicasting protocols for ad hoc network have been proposed in the literature. However, these protocols can not provide high packet delivery ratio, low control packet overhead and low expended bandwidth at the same time. Therefore, in this paper, we propose RTMA that improves multicasting performance in wireless ad hoc networks. RTMA calculates its current region from its position information by using GPS in order to make tree among the multicast group nodes in the same region. The proposed region-based tree method is for high packet delivery ratio, low control packet overhead when many senders send data packets. RTMA makes a reliable tree by using speed information to fill a gap of the weak points of the tree structure. When searching the routing path, RTMA selects the reliable path excluding high speed nodes.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.21-29
• /
• 2013

This paper proposed the architecture of the authentication and the transmission for high reliable emergency data management based on U-healthcare wireless mesh networks. In U-healthcare monitoring service, the high reliable bio data management as well as the data transmission are required because the monitoring emergency bio data is related linked to life. More specifically, the technologies of the identity authentication of the measuring bio data, the personalized emergency status diagnosis who is authenticated the bio data and the emergency data transmission are important first of all. To do this, this paper presents the structure and protocol of the identity authentication management with using the extended IEEE 11073 PHD, the structure of policy-based management of the emergency bio data for the highly reliable management and the resilient routing protocol based on wireless mesh network for the reliable data transmission.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.6
• /
• pp.695-701
• /
• 2014

Blackhole attacks having a unauthorized change of routing data will cause critical effects for transmission performance. The transmission performance will be improved to the a certain level by using or having IDS(Intrusion Detection System)/IPS(Intrusion Prevention System) as countermeasures to blackhole attacks. In this papar, the effects of IDS to ene-to-end performance of packet aggregation transmission are analyzed on MANET(Mobile Ad-hoc Network) with IDS under blackhole attacks. MANET simulator based on NS-2 is used to analyze performance parameters as MOS, connection ratio, delay and packet loss rate as standard performance parameters, an another performance factor which is suggested in this paper. VoIP(Voice over Internet Protocol) traffics, one of voice services, is used for performance analysis. A suggestion for IDS implementation on MANET with packet aggregations under blackhole is shown as one of results.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.2
• /
• pp.45-52
• /
• 2006

Mobile Ad-hoc Network(MANET) could be applied to various applications by virtue of its characteristics such as self-organizing and infrastructure-free network. This paper proposes a multimedia application service model for MANET, called multi-hop Relay(mRelay) system. It supports a multi-hop communication-based multimedia service interworked with Internet by using an unmanned moving robot with wireless multimedia communication function as a mRelay terminal. The modified AODV routing protocol was applied to the terminal and it was verified that composition and maintenance of mobile Ad-hoc network in mRelay system under the various indoor scenarios were successful and stable multi-hop multimedia services were possible. The mRelay system can be applicable to various application services of mobile Ad-hoc networks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.206-215
• /
• 2007

Ad-Hoc network technology is a mobile internet technology of the future that will be used widely not only in Mobile Network but also in Wireless Personal Area Network (WPAN) and Ubiquitous Network For this to occur, distributed routing protocol design, loop prevention for link information reduction in overhead for control messages and route restoration algorithm must be improved or complemented. Security techniques that can guarantee safe com-munication between Ad-Hot nodes net also be provided. This study proposes and evaluates a new authentication mechanism for MANET. The mechanism segregates the roles of certification authority to keep with the dynamic mobility of nodes and handle rapid and random topological changes with minimal over-head. That is, this model is characterized by its high expandability that allows the network to perform authentication service without the influence of joining and leaving nodes. The efficiency and security of this concept was evaluated through simulation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.4
• /
• pp.1224-1248
• /
• 2022

In various sensor network applications, such as climate observation organizations, sensor nodes need to collect information from time to time and pass it on to the recipient of information through multiple bounces. According to field tests, this information corresponds to most of the energy use of the sensor hub. Decreasing the measurement of information transmission in sensor networks becomes an important issue.Compression sensing (CS) can reduce the amount of information delivered to the network and reduce traffic load. However, the total number of classification of information delivered using pure CS is still enormous. The hybrid technique for utilizing CS was proposed to diminish the quantity of transmissions in sensor networks.Further the energy productivity is a test task for the sensor nodes. However, in previous studies, a clustering approach using hybrid CS for a sensor network and an explanatory model was used to investigate the relationship between beam size and number of transmissions of hybrid CS technology. It uses efficient data integration techniques for large networks, but leads to clone attacks or attacks. Here, a new algorithm called SBEA (Snowball Endurance Algorithm) was proposed and tested with a bow. Thus, you can extend the battery life of your WSN by running effective copy detection. Often, multiple nodes, called observers, are selected to verify the reliability of the nodes within the network. Personal data from the source centre (e.g. personality and geographical data) is provided to the observer at the optional witness stage. The trust and reputation system is used to find the reliability of data aggregation across the cluster head and cluster nodes. It is also possible to obtain a mechanism to perform sleep and standby procedures to improve the life of the sensor node. The sniffers have been implemented to monitor the energy of the sensor nodes periodically in the sink. The proposed algorithm SBEA (Snowball Endurance Algorithm) is a combination of ERCD protocol and a combined mobility and routing algorithm that can identify the cluster head and adjacent cluster head nodes.This algorithm is used to yield the network life time and the performance of the sensor nodes can be increased.