• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.2
• /
• pp.309-315
• /
• 2017

Recently it has drawn much attention on the technologies about Internet of Things (IoT) which connects objects with constrained resource and heterogenous communication module in order to communicate information via internet. We propose a real-time sensor monitoring system based on IPv6 over Bluetooth Low Energy (BLE), which is included in Bluetooth 4.2 Specification. Since this system uses a publish-subsribe based IoT protocol, so called Message Queueing Telemetry Transport (MQTT), neither transforming network data nor any proxy server is needed in order to transmit data. Through the web client connected to this system, you can monitor sensor data sent by BLE device in real-time, intermediated via MQTT broker and then delivered to the client via HTTP and websocket protocol. In this paper we evaluated network capacity and availability of the implemented test platform. Thus by using this system it is possible to make development cost low and to construct IoT network with heterogenous devices easily.

• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.937-950
• /
• 2004

With growing population of internet and web applications, distributed environment is considered to be the standard architecture of application. A network management systems(NMS) is necessary to control and monitor the complex network resources for providing and sharing the heft quality service. We recognize the NMS as a standard infrastructure for supporting efficient networking and a separate commercial applications. We believe every resource including software, hardware and environment for the network management should be separated from special protocols, vendors and applications. Therefore, We need a standard network management system that is efficient and consistent because of the heterogeous network features. In regards to software development, software reuse through assembling and extending the reusable elements such as patterns and components assures to realize the best productivity and quality The component based development(CBD) methodology that can assemble black box though well defined interfaces makes it possible to develop easer and quicker applications and is proved as the best software development solution involved in construction, selection and assembly of components. In this thesis, we describe the architecture for the network management and identify, define and design the components through analysis and design in the network management domain and Identified components mapped to the component architecture. We also specify the component development and design and implement the component for developing the network management. Implemented components apply to the component repository system that register, retrieve and understand the components. We analyze, design and implement the entire network management system based on configuration, connection, performance and fault management through the pre-developed components.

• Journal of the Korean Geographical Society
• /
• v.42 no.5
• /
• pp.788-807
• /
• 2007

To better publish geographical information on the Web, it is important to capture how Web technologies are changing. For a recent decade, Semantic Web has been developed by incorporating ontologies into the current Web, with an aim to make computers understand rather than simply display. Ontology, an explicit specification of a conceptualization, and the Semantic Web grounded on the ontology, have the potential for effective sharing and appropriate retrieval of geographical information. This paper describes a Semantic Web Service over the mobile Web that can offer pertinent tourism information according to user contexts. To do this, a tourism ontology was formalized in the PARA(Place-Attraction-Resource-Activity) ontology model by organizing tourist places, tourist attractions, tourism resources, and activities. Locational relationships between tourist places were also included in the PARA ontology model to take into account the movements of tourists on a railway network. The XML(Extensible Markup Language) Web Service in the middle tier manages the client-side request for information retrieval and the corresponding server-side response from the data provider. The PARA ontology was integrated into the XML Web Service for the concept-based discovery of tourism information. The applicability of the proposed system was tested through a simulation experiment for Tokyo tourism.

• Journal of Communications and Networks
• /
• v.2 no.1
• /
• pp.5-17
• /
• 2000

cdma2000 offers several enhancement as compared to TIA/EIA-95, although it remains fully compatible with TIA/EIA-95 systems and allows for a smooth migration from one to the other-Major new capability include:1)connectivity to GSM-MAP in addition to IP and IS-41 networks; 2) new layering with new LAC and MAC architectures for improved service multiplexing and QoS management and efficient use of radio resource ;3) new bands and band widths of operation in support of various operator need and constraints, as well as desire for a smooth and progressive migration to cdma 2000; and 4) flexible channel structure in support of multiple services with various QoS and variable transmission rates at up to 1 Mbps per channel and 2 Mbps per user. Given the phenomenal success of wireless services and desire for higher rate wireless services. improved spectrum efficiency was a major design goal in the elaboration of cdma2000. Major capacity enhancing features include; 1) turbo coding for data transmission: 2)fast forward link power control :3) forward link transmit diversity; 4) support of directive antenna transmission techniques; 5) coherent reverse link structure; and 6) enhanced access channel operation. As users increasingly rely on their cell phone at work and at home for voice and data exchange, the stand-by time and operation-time are essential parameters that can influence customer's satisfaction and service utilization. Another major goal of cdma2000 was therefore to enable manufacturers to further optimize power utilization in the terminal. Major battery life enhancing features include; 1) improved reverse link performance (i.e., reduced transmit power per information bit; 2) new common channel structure and operation ;3) quick paging channel operation; 4) reverse link gated transmission ; and 5) new MAC stated for efficient and ubiquitous idle time idle time operation. this article provides additional details on those enhancements. The intent is not to duplicate the detailed cdma2000 radio access network specification, but rather to provide some background on the new features of cdma2000 and on the qualitative improvements as compared to the TIA/EIA-95 based systems. The article is focused on the physical layer structure and associated procedures. It therefore does not cover the MAC, LAC, radio resource management [1], or any other signaling protocols in any detail. We assume some familiarity with the basic CDMA concepts used in TIA/EIA-95.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.565-573
• /
• 2016

Wi-Fi Direct standard technology(Wi-Fi Peer to Peer Technical Specifications v1.2, 2010) was designed for allowing peer to peer communication between two or more devices and various products which have been currently manufactured such as smart phone and smart TV have already provided this technical function. In this technology the role of Coordinator in Wi-Fi infrastructure would be matched to GO(Group Owner) which needs relatively high energy resource and computation power due to the high probability for allowing 3rd-party connection, however, the current standard specification would be limited in terms of energy distribution because it has not included a process to determine the role of GO. To address above problem, this paper classified considerable parameters into the general parameters for the physicality of devices and the specific parameters for considering the role position depending on use-case scenario, and proposed a new method called DIVA to help efficiently determining GO role from the member devices of Wi-Fi Direct network. Furthermore the effect of this mechanism was proved via simulation-based experiments.

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.139-146
• /
• 2009

Recently, software industry regarding national defense increases system development of distributed simulation system of M&S based to overcome limit of resource and expense. It is one of key technologies for offering of mutual validation among objects and reuse of objects which are discussed for developing these systems. RTI, implementation of HLA interface specification as software providing these technologies uses Federation Object Model for exchanging information with joined federates in the federation and each federate has a characteristic that is supposed to have identical FOM in the federation. This paper presents a characteristic of Base Object Model, SISO standardization for improving reuse and interoperability of Federation Object Model applied simulation network manager based HLA/RTI and suggests method of designing the structure of simulation network manager through the modularity of Federation Object Model.

• Journal of KIISE:Information Networking
• /
• v.30 no.6
• /
• pp.787-798
• /
• 2003

The flow label field in IPv6 has been proposed to provide the QoS. Since the existing flow label specification scheme like random-number format utilizes the label only as the identifier of flow, it is not appropriate for providing differentiated services according to the characteristics of various types of real-time traffic. This paper proposes a hybrid scheme that makes use of the flow label fields as components of flow and QoS parameters as well. To be specific, this paper investigates a scheme that both guarantees the end-to-end service quality and utilizes efficiently backbone resources by allowing users to specify QoS parameters using flow labels. Assuming an MLPS-TE network as the backbone, we compare the performance of our proposed scheme with that of random-number scheme through simulation. The simulation result shows that our scheme is more efficient than the existing one in terms of the transmission rate as well as the resource utilization of the backbone.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.04a
• /
• pp.561-564
• /
• 2001

본 논문은 무선 에플리케이션 프로토콜 Specification에서 제시하고 있는 WTA(Wireless Telephony Application) 를 기초로 네트워크에서 발생한 실시간 Event를 처리할 수 있는 모바일 클라이언트 및 WTA서버에 대한 설계와 구현에 대해서 기술한다. 또한 네트워크 이벤트 및 사용자가 발생시킨 이벤트를 디바이스에 독립적으로 처리할 수 있는 WTA 라이브러리와 필요한 컨텐츠를 실시간으로 브라우징하기 위한 Repository 에 대해 기술한다. 전체적인 WTA 환경 구조는 크게 2개의 물리적 구조인 Mobile Client와 WTA Server로 구현되어있다. Mobile Client의 내부 모듈은 표준 WAE 사용자 에이전트(Standard WAE User Agent)의 확장인 WTA 사용자 에이전트 모듈(WTA User-Agent Module), 필요한 resource를 서버로 요청하고 저장하는 채널 인스톨 모듈(Channel Install Module), network로부터 발생한 Event를 처리하는 이벤트 핸들러 모듈(Event Handler Module), mobile network 기능들(e.g. setting up calls)과 device specific feature(e.g. manipulating the phonebook)를 다루는 WTA 스크립트 라이브러리(WTA Script Library), Phonebook 엑세스 모듈(Phonebook Access Module), 실시간으로 즉각 이벤트에 반응하기 위한 Repository로 구성되어있고, WTA Server는 Client가 요청한 Content(services)를 전달 해 주는 컨텐트 전달 모듈(Content Deliver Module)과 서버 Phonebook 엑세스 모들(Server Phonebook Access Module)로 구성되어 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6A
• /
• pp.458-467
• /
• 2009

Long Tenn Evolution (LTE) is the next generation mobile phone technology which has being standardized by the Third Generation Partnership Project (3GPP). In the existing mobile communication networks, voice traffic is delivered through circuit switched networks. In LTE, however, all kinds of traffic are transferred through IP based packet switched networks which has best-effort characteristic. Therefore, providing QoS in LTE system is difficult. In order to provide QoS in LTE, RRM is very important. Especially, in part of RRM, call admission control (CAC) performs an important function to reduce network congestion and guarantee a certain level of QoS for on-going calls. In this paper, we propose a CAC algorithm in order to provide QoS for various kinds of services in LTE system. The performance of the proposed algorithm is evaluated with various simulation environments. The results show that the proposed algorithm provides QoS through rejections of requested calls. Especially, the proposed CAC algorithm can be satisfied with packet delay requirement defined in LTE specification.

• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.834-845
• /
• 2011

Massive broadcasting contents such as UHD(Ultra High Definition) TV which requires multi-channel capacity for transmission has been introduced in recent years. A transmission scheme with channel bonding has been considered for transmission of massive broadcasting contents. In HFC(Hybrid Fiber Coaxial) networks, DOCSIS 3.0(Data Over Cable Service Interface Specification 3.0) has already applied channel bonding schemes for up/downstream of data service. A method unlike DOCSIS 3.0 is required to introduce a channel bonding scheme in the broadcasting service having unidirectional transmission with a downstream. Since a massive broadcasting content requires several channels for transmission, VBR(Variable Bit Rate) transmission has been emerging for the bandwidth efficiency. In addition, research on channel allocation and resource scheduling is required to guarantee QoS(Quality of Service) for the broadcasting service based on VBR. In this paper, we propose a transmission method for mass broadcasting service in HFC network and show the UHD transmission simulator developed to evaluate the performance. In order to evaluate the performance, we define various scenarios. Using the simulator, we assess the possibility of channel bonding and VBR transmission for UHD broadcasting system to provide mass broadcasting service efficiently. The developed simulator is expected to contribute to the efficient transmission system development of mass broadcasting service.