• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.899-902
• /
• 2003

Chip Pin Parasitic은 실제 Chip Pad에서부터 Bonding Wire를 통한 Package Lead Frame까지를 의미한다. 여기서, Lead Frame 및 Bonding Wire에서 Inductance 및 작은 저항이 보이고, Chip Pad에서의 Capacitance, 그리고 Pad 부터 Ground까지의 Return Path에서 발생하는 저항이 보인다. 이들을 모두 합하면 L, R, C의 Series로 나타낼 수 있다. 본 논문에서는 이런 Chip Pin Parasitic을 추출 하기 위해서 TDR(Time Domain Reflectometer)과 NA(Network Analyzer)를 사용하였는데, TDR의 경우 PCB를 제작하여 Chip을 Board위에 붙인 후 Time Domain에서 측정 하였고 NA의 경우 Pico Probe를 이용하여 Chip pin에 직접 Probing해서 Smith Chart를 통하여 Extraction 값을 추출했다. 이 경우, NA를 이용한 측정이 좀 더 정확한 Parasitic 값을 추출할 수 있으리라 예상되겠지만, 실제로 Chip이 구동하기 위해서는 Board위에 있을 때의 상황도 고려해야 하기 때문에 TDR 추출 값과 NA 추출 값을 모두 비교하였다.

• 분석과학
• /
• 제15권3호
• /
• pp.317-320
• /
• 2002

The layer structure of the title compound, $[Ni(en)_2(H_2O)_2](CH_3C_6H_4SO_3)_2(H_2O)$ (en = ethylenediamine), consists of discrete cations, anions, and solvate water molecules linked by a hydrogen bonding network. The central Ni atom of the cation layer has a slightly distorted octahedral coordination geometry with the ethylenediamine ligands functioning as a N,N'-bidentate and the water ligands bonding through oxygen in a trans arrangement. The p-toluenesulfonate of the anion layer has an alternate sulfonate group directed toward opposite side of the cation layer. This layer structure is stabilized by a hydrogen bond involving the O atoms of the sulfonate, the water ligand, solvate water molecule, and the N atoms of the ethylenediamine.

• Elastomers and Composites
• /
• 제34권4호
• /
• pp.299-314
• /
• 1999

Bonding metal and textile components to rubber has always posed a problem. In this paper, an attempt had been made to modify textile and metal surfaces for bonding with rubber. The metal surfaces were modified using silane coupling agents and textile fibers were modified using plasma polymerization techniques. Some results on adhesion of metals to a range of sulfur-cured rubber compounds using a combination of organofunctional silanes are given here. The treatment was not only effective for high-sulfur compounds but also for low-sulfur com pounds as used in engine mounts and even for some semi-EV compounds. Coatings of plasmapolymerized pyrrole or acetylene were deposited on aramid and polyester tire cords. Standard pull-out force adhesion measurements were used to determine adhesion of tire cords to rubber compounds. The plasma coatings were characterized by various techniques and the performance results are explained in an interpenetrating network model.

• Bulletin of the Korean Chemical Society
• /
• 제3권1호
• /
• pp.9-13
• /
• 1982

Sulfametrole, $C_9H_{10}N_4O_3S_2$, crystallizes in the monoclinic system, space group $P2_1/n$ , with a = 8.145(2), b = 16.505(4), c = 9.637(1)${\AA},{\beta}=103.72(1)^{\circ},D_m=1.52gcm^{-3}$,Z=4.Intensities for 3594(2143 observed) unique reflections were measured on a four-circle diffractometer with Mo $K{\alpha}$ radiation $({\lambda}=0.71069{\AA})$. The structure was solved by direct method and refined by full-matrix least squares to a final R of 0.070. The geometrical features of the thiadiazole ring indicate some ${pi}$-electron delocalization inside the ring. The least squares planes defined by the benzene and thiadiazole rings are nearly perpendicular to each other(dihedral angle; $93.9^{\circ}$ ). All the potential hydrogen-bond donor atoms in the molecule, N(1) and N(2), are included in the hydrogen bonding. The molecules through hydrogen bonding form three dimensional network.

• Journal of Contemporary Eastern Asia
• /
• 제20권2호
• /
• pp.108-128
• /
• 2021

Research on the news coverage of North Korea has been paying less attention to social media platforms than to legacy media. An increasing number of social media users post, retweet, share, interpret, and set agendas on North Korea. The accessibility of international users and North Korea's publicity purposes make social media a venue for expression, news diversity, and framing about the nation. This study examined the sentiment of Twitter posts on North Korea from a framing perspective and the relationship between network strengths and sentiment from a social network perspective. Data were collected using two tools: Jupyter Notebook with Python 3.6 for preliminary analysis and NodeXL for main analysis. A total of 11,957 tweets, 10,000 of which were collected using Python and 1,957 tweets using NodeXL, about North Korea between June 20-21, 2020 were collected. Results demonstrated that there was more negative sentiment than positive sentiment about North Korea in the sampled Twitter posts. Some users belonging to small network sizes reached out to others on Twitter to build networks and spread positive information about North Korea. Influential users tended to be impartial to sentiment about North Korea, while some Twitter users with a small network exhibited high percentages of positive words about North Korea. Overall, marginalized populations with network bonding were more likely to express positive sentiment about North Korea than were influencers at the center of networks.

• 멤브레인
• /
• 제10권3호
• /
• pp.148-154
• /
• 2000

본 연구에서는 sulfur-succinic acid의 가교제를 이용한 가교된 폴리비닐알코올(poly(vinyl alcohol), PVA) 가교막을 이용하여 MTBE-methanol 혼합액에 대하여 조업온도, 가교제의 조성에 따른 증기투과 공정의 투과 특성을 조사 하였다. 팽윤 실험을 통해 PVA/SSA 가교막에 대하여 가교제 조성에 따른 막의 구조와 PVA의 하이드록실기(-OH), SSA의 설폰기(-$SO_3$H)와 용매와의 수소결합의 두 가지 인자가 상호 보완적으로 작용하고 있음을 알 수 있었다. 투과 특성에 있어 SSA의 설폰기가 중요한 인자로 작용하였다. 예를 들면 7% SSA 막에 대해서는 수소결합의 효과보다는 가교도의 효과가 투과 특성에 중요한 요인으로 작용하며 5% SSA에 대해서는 수소결합의 효과가 중요하게 작용하였다. 증기투과 공정에 있어 막과 직접 접촉하는 증기상이 액상에 비하여 methanol의 농도가 낮아 PVA의 하이드록실기와 methanol과의 수소결합 확률이 감소함에 따라 투과 특성에 영향을 미친다. 결과적으로 7% SSA 막에 대하여 MTBE/mthanol=80/20 혼합액에 대하여 공급액의 온도 3$0^{\circ}C$에서 선택도 2187, 투과도 4.84g/$m^2$hr를 보여 주었다.

• Korean Membrane Journal
• /
• 제2권1호
• /
• pp.36-47
• /
• 2000

This paper deals with the separation of MTBE-methanol mixtures using crosslinked Poly(vinyl alcohol)(PVA) membranes with sulfur-succinic acid(SSA) as a crosslinking agent by pervaporation and vapor permeation technique. The operating temperatures, methanol concentration in feed mixtures, and SSA concentrations in PVA membranes were varied to investigate the separation performance of PVA/SSA membranes and the optimum separation characteristics by pervaporation and vapor permeation. And also, for PVA/SSA membranes, the swelling measurements were carried out to study the transport phenomena. The swelling measurements were carried out for pure MTBE and methanol, and MTBE/methanol=90/10, 80/20 mixtures using PVA/SSA membranes with varying SSA compositions. There are two factors of the membrane network and the hydrogen bonding. In pervaporation separation was also carried out for MTBE/methanol=90/10, 80/20 mixtures at various temperatures. The sulfuric acid group in SSA took an important role in the membrane performance. The crosslinking effect might be over the hydrogen bonding effect due to the sulfuric acid group at 3 and 5% SSA membranes, and this two factors act vice versa on 7% SSA membrane. In this case, the 5% SSA membrane shows the highest separation factor of 2,095 with the flux of 12.79g/㎡$.$hr for MTBE/methanol=80/20 mixtures at 30$^{\circ}C$ which this mixtures show near the azeotopic composition. Compared to pervaporation, vapor permeation showed less flux and similar separation factor. In this case, the flux decreased significantly because of compact structure and the effect of hydrogen bonding. In vapor permeation, density or concentration of methanol in vaporous feed is lower than that of methanol in liquid feed, as a result, the hydrogen bonding portion between the solvent and the hydroxyl group in PVA is reduced in vapor permeation. In this case, the 7% SSA membranes shows the highest separation factor of 2,187 with the flux of 4.84g/㎡$.$hr for MTBE/methanol=80/20 mixtures at 30$^{\circ}C$.

• 멤브레인
• /
• 제2권1호
• /
• pp.36-36
• /
• 1992

This paper deals with the separation of MTBE-methanol mixtures using crosslinked Poly(vinyl alcohol)(PVA) membranes with sulfur-succinic acid(SSA) as a crosslinking agent by pervaporation and vapor permeation technique. The operating temperatures, methanol concentration in feed mixtures, and SSA concentrations in PVA membranes were varied to investigate the separation performance of PVA/SSA membranes and the optimum separation characteristics by pervaporation and vapor permeation. And also, for PVA/SSA membranes, the swelling measurements were carried out to study the transport phenomena. The swelling measurements were carried out for pure MTBE and methanol, and MTBE/methanol=90/10, 80/20 mixtures using PVA/SSA membranes with varying SSA compositions. There are two factors of the membrane network and the hydrogen bonding. In pervaporation separation was also carried out for MTBE/methanol=90/10, 80/20 mixtures at various temperatures. The sulfuric acid group in SSA took an important role in the membrane performance. The crosslinking effect might be over the hydrogen bonding effect due to the sulfuric acid group at 3 and 5% SSA membranes, and this two factors act vice versa on 7% SSA membrane. In this case, the 5% SSA membrane shows the highest separation factor of 2,095 with the flux of 12.79g/㎡·hr for MTBE/methanol=80/20 mixtures at 30℃ which this mixtures show near the azeotopic composition. Compared to pervaporation, vapor permeation showed less flux and similar separation factor. In this case, the flux decreased significantly because of compact structure and the effect of hydrogen bonding. In vapor permeation, density or concentration of methanol in vaporous feed is lower than that of methanol in liquid feed, as a result, the hydrogen bonding portion between the solvent and the hydroxyl group in PVA is reduced in vapor permeation. In this case, the 7% SSA membranes shows the highest separation factor of 2,187 with the flux of 4.84g/㎡·hr for MTBE/methanol=80/20 mixtures at 30℃.

• 디지털융복합연구
• /
• 제14권10호
• /
• pp.261-269
• /
• 2016

본 논문에서는 CATV 동축케이블 망에서 초고속인터넷 서비스를 제공하기 위한 네트워크 융복합의 새로운 기술을 제안하고, 1Gbps급 전송속도를 갖는 케이블 집선장치와 모뎀을 제작하였다. 이 기술은 기존 DOCSIS 규격의 결합(Bonding) 기술에 비해 제작비용을 낮출 수 있을 뿐만 아니라 채널 대역폭 조절에 따라 데이터 속도도 가변이 용이한 구조로 설계되었다. 실험결과에 따르면, 128QAM 컨볼루션 코드 레이트를 1/2, 2/3, 3/4, 5/6, 7/8로 변화시켰을 때, 데이터는 에러율이 0 상태에서 최대 299Mbps까지의 전송속도를 나타냈으며, 256QAM에서는 $10^{-5}$이내의 에러율 상태에서 342Mbps의 전송속도를 나타내었다. 본 논문의 결과를 활용하여, 채널 대역폭 200MHz를 확보하고 채널 상태에 따라 변조율과 부호율을 조정하면, 1Gbps 이상 전송속도가 가능하고, 기존 DOCSIS방식 보다 성능과 가격 면에서 경쟁력을 가질 것으로 기대된다.

• 대한전자공학회논문지SD
• /
• 제48권7호
• /
• pp.76-81
• /
• 2011

본 논문에서는 비아 절단 구조를 제안하고 2층 구조의 DRAM 패키지 기판 설계에 적용하여 낮은 임피던스를 가지는 파워 분배망(Power Distribution Network)을 구현하였다. 제안한 신규 비아 구조는 비아의 일부가 절단된 형태이고 본딩 패드와 결합하여 넓은 배선 면적을 필요로 하지 않는 장점을 가진다. 또한 비아 절단 구조를 적용한 설계에서는 본딩 패드에서 VSSQ까지의 배선 경로를 효과적으로 단축시킴으로써 PDN 임피던스를 개선시킬 수 있다. DRAM 패키지 기판 상의 윈도우 영역 형성과 동시에 비아의 일부 영역이 제거되므로 비아 절단 구조 제작을 위한 추가적인 공정은 없다. 또한 비아 홀 내부를 솔더 레지스트로 채움으로써 버(Burr) 발생을 최소화하였으며, 이를 패키지 기판 단면 촬영을 통해 검증하였다. 비아 절단 구조의 적용 및 VDDQ/VSSQ 배치에 의한 PDN 임피던스 변화를 검증하기 위해서 3차원 전자장 시뮬레이션 및 네트워크 분석기 측정을 통해 기존 방식을 적용한 패키지 기판과 비교 검증을 진행하였다. 신규 DRAM 패키지 기판은 대부분의 주파수 범위에서 보다 우수한 PDN 임피던스를 가졌으며, 이는 제안한 비아 절단 구조와 파워/그라운드 설계 배치가 PDN 임피던스 감소에 효과적임을 증명한다.