• 한국수산과학회지
• /
• 제33권2호
• /
• pp.115-118
• /
• 2000

은연어는 국내에서도 양식되고 있는 고급어종으로 생산량도 매년 증가추세에 있다. 스몰트까지 담수에서 사육한 은연어는 이후에 해수로 옮겨 사육하는데, 육상에서 해상으로의 운반과정에서 그물작업이나 가두기는 피할 수 없는 과정이다. 이로 인해 어류는 상당한 스트레스를 받아 해상사육 과정에서 폐사하기도 한다. 본 연구는 그물작업이 은연어의 스트레스에 미치는 영향을 살펴보고자 2시간의 그물작업을 한 전후에 1차 스트레스 반응의 지표로 코티졸의 농도를, 그리고 2차 반응지표로 혈당, 중성지방, 콜레스테롤, 젖산 및 K Na, Cl 등의 전해질 농도와 함께 ALT, AST와 LDH의 활성을 조사하였다. 그 결과, 이들 그물작업으로 인해 연어의 코티졸, 혈당 농도 및 LDH 활성은 유의적 (p<0.05)으로 증가하였기에 은연어가 상당한 스트레스를 받는다는 것을 알 수 있었다.

• 한국환경생태학회지
• /
• 제24권3호
• /
• pp.334-342
• /
• 2010

본 연구는 기 조성된 옥상녹화지의 동 식물상 모니터링을 통해 옥상녹화지의 생태적 변화를 관찰하기 위한 목적으로 수행되었다. 대상지는 서울여대 행정관 옥상녹화지역으로 조성 당시인 2005년과 2009년 현재 식재 식물의 생존여부와 이입식물, 출현 동물군 중 곤충을 중심으로 비교 분석하였다. 식재당시인 2005년의 경우, 식물은 식재종 26과 100종이었으나, 2009년 조사 결과 23과 62종으로 나타났다. 이 중 식재식물은 14과 40종으로 줄었으며, 이입식물은 11과 22종이 출현하였다. 곤충은 2009년 총 9목 7과 21종이 출현하였으며, 육안조사법으로 8목 15과 19종, 먹이 유인포획법으로 5목 5과 5종이 발견되었다. 곤충은 주로 비행하여 대상지에 출현한 것으로 보이며, 문헌조사로 밝혀진 곤충의 특성과 연관하여 분석한 결과 대상지의 식물을 식수로 이용하거나, 서식처로 사용하는 등 식물과 밀접한 연관성을 보였다.

• 한국수산과학회지
• /
• 제8권1호
• /
• pp.7-10
• /
• 1975

제주도 고등어 자망어업의 주어기인 1974년 5월 28일부터 8월 31일까지 서귀포와 비양도근해어장에서 고등어 자망어구의 이망율에 관한 시험조업결과는 다음과 같다. 1. $X^2$ t 검정에 의하면 고등어 nylon-monofilament 자망 B형이 nylon-multifilament 자망 A형보다 이망성능이 우위하고 나망율비는 $m_A:m_B=1:1.8$이다. 2. 망목 75mm인 nylon-monofilament 자망 C형, D형이 망목 85mm인 nylon-monofilament 자망 E형 F형 보다 이망성능이 우위하고 이망율비는 $m_E{\cdot}F:m_C{\cdot}D=1:2.8$이다. 3. 망계 굵기가 120tex와 75tex이고 망목이 75m 및 85mm인 C, D, E, F, 형에서는 상호간의 우위는 모두 확인할 수 없었다.

• 한국수산과학회지
• /
• 제20권3호
• /
• pp.177-184
• /
• 1987

통발과 자망 등에 어획되는 게류의 측면적인 보행운동은 매우 특이하여 어획 메카니즘을 밝히는데 매우 중요한 요소가 된다. 여기서는 해운대 동백섬의 조간대에서 채집한 풀게를 사용하여 망지위에서의 직선적인 운동과 회전 운동 등을 관찰하고 다리의 보행위치와 시간적인 변화를 분석하였다. 그 결과 망지위에서의 보행운동은 착지위치에 따라 그물코 사이로 다리가 빠지게 되는 불규칙적인 움직임이 대부분이므로 여러가지 보행 요인들의 편차가 게의 크기에 관계 없이 크게 나타났다. 풀게의 망지위에서의 보폭, 보행속도, 다리간의 위상차 등은 평면에서 보다 훨씬 작았으나, 보행주기, 다리마디간의 각도 등은 평면에서 보다 양간 증가하였다. 따라서 게가 자망에 걸리는 현상은 게의 크기에 따른 다리의 보행운동과 망지의 망목크기 등을 고려하여 세밀하게 조사되어야 할 것이다.

• 수산해양교육연구
• /
• 제6권1호
• /
• pp.11-19
• /
• 1994

The North Pacific midwater trawling which is one of the important fishing methods for Korean fishing industry is working in the Bering Sea and the sea near Kamchaka Peninsula. The catch by Korean midwater trawlers had been recorded about 300 thousands $^{M/_T}$ a year. Six types of midwater trawl net-ordinary midwater trawl net, super-V trawl net, super mesh trawl net, rope trawl net, super plus trawl net and kite trawl net-have been widely used by large trawlers above 1,500gt in size since 1982. Regarding the fishing efficiency, the super plus trawl net and kite trawl net were acknowledged as higher than other nets. Maximum mesh size of super-plus trawl net and kite trawl net ranges about 20m, whereas the length of net about 150m, and high-tech polyethylene is used as the material of rope part. The problems involved in the North Pacific midwater trawl net may be summarized as follows ; (1) The dimension of fishing gear is too big compared with the towing power of trawler. (2) The mesh size of the rope part is too big compared with that of the common netting part. (3) The net is often torn out in the connecting position of the rope part and the netting part. (4) The net is not matched with the trawler and the otter board in many trawlers, so the shape of the trawl gear in the water is instable. (5) The fish school located near head rope, ground rope and side rope in the net recorder is not caught in practice because of the net instability.

• 수산해양기술연구
• /
• 제34권3호
• /
• pp.287-293
• /
• 1998

Floating debris was recorded from a training ship, #1 Kwarnksan, of Pukyong National University with about 10 knots speed during March, May and July of 1997. The area sampled is the Southeastern Coast of Korea, divided into 40 unit segments on survey routes. Debris fabrication materials were categorized using the following ; man-made or natural wood items, paper, cardboard, nylon rope, netting, styrofoam and plastics, floating metal and glass containers. All identified items within a $100\;{\pm}\;2\;m$ wide band were recorded but ignored if beyond this boundary.The results of distribution and composition of floating debris in the area as follows:1. The quantities of debris during the duration of survey were distributed from 2~605 items per km2. The most obvious trend is the widespread distribution of all debris. 2. The highest densities of all debris were discovered in the coastal waters of Seoimal lighthouse, the southeastern part of Koje island, next near Nakdong estuaries. Especially styrofoam & plastics were observed in 77.4~87.2% of sampled area, next is wood items, 9.1~ 13.5%. And nylon netting & rope, 3.6%, was the third item of pollutant. Others are very small. 3. Compared with the East Coat of Korea, the quantities of all debus in theSoutheastern Sea are 6 times as large as the East Coast. The survey provides a basis for more detailed survey work in the South Sea. Further surveys are being investigated, and from this it is hoped that a much wider coverage can be achieved, perhaps on all sites of the Coast of Korea and contributed to the removal method, finding of sources, stationary area of debris.

• 수산해양교육연구
• /
• 제9권1호
• /
• pp.31-39
• /
• 1997

Floating debris was recorded from a training ship, #1 Kwanaksan, of Pukyong National University with about 10 knots speed during August 19~26, 1996. The area sampled is the East Coast of Korea, divided into 33 unit segments on survey routes. Debris fabrication materials were categorized using the following; man-made or natural wood items, paper, cardboard, nylon rope, netting, styrofoam and plastics, floating metal and glass containers. All identified items within a $100{\pm}2m$ wide band were recorded but ignored if beyond this boundary. The results of distribution and composition of floating debris in the area are as follows: 1. The quantities of debris during the summer were distributed from 1.8~52 items per $km^2$. The most obvious trend is the widespread distribution of all debris. 2. The highest densities of all debris were discovered in the vicinity of Pusan and ills an area. Especially styrofoam & plastics were observed in 81% of sampled area, next is wood items, 9.1%. Nylon netting & rope was the least widespread pollutant. 3. The relationship between distribution of debris and surface currents of the area was not apparently revealed through this survey. Further surveys are being instigated, and from this it is hoped that a much wider coverage can be achived, perhaps on all sites of Southern and Western sea of Korea and contributed to the finding of sources,stationary area of debris.

• Ocean Systems Engineering
• /
• 제7권2호
• /
• pp.143-155
• /
• 2017

For complex flexible structures such as nets, the determination of drag forces and its deformation is a challenging task. The accurate prediction of loads on cages is one of the key steps in designing fish farm facilities. The basic physics with a simple cage, can be addressed by the use of experimental studies. However, to design more complex cage system for various environmental conditions, a reliable numerical simulation tool is essential. In this work, the current load on a cage is calculated using a Morison-force model applied at instantaneous positions of equivalent-net modeling. Variations of solidity ratio ($S_n$) of the net and current speed are considered. An equivalent array of cylinders is built to represent the physical netting. Based on the systematic comparisons between the published experimental data for Raschel nets and the current numerical simulations, carried out using the commercial software OrcaFlex, a new formulation for $C_d$ values, used in the equivalent-net model, is presented. The similar approach can also be applied to other netting materials following the same procedure. In case of high solidity ratio and current speed, the hybrid model defines $C_d$ as a function of Re (Reynolds number) and $S_n$ to better represent the corresponding weak diffraction effects. Otherwise, the conventional $C_d$ values depending only on Re can be used with including shielding effects for downstream elements. This new methodology significantly improves the agreement between numerical and experimental data.

• 패션비즈니스
• /
• 제4권3호
• /
• pp.115-129
• /
• 2000

The purpose of this study is to discover the techniques and the trends of expression of modern knitwears focusing on the 1990's after. The resorts of this study is as follows: The techniques of expression of knitwears are classified by the sections on the techniques and the styles of expression. The divisions into the techniques are knitting, crochet, macrame, netting, knotting. And the divisions into upon the styles of expressions are color, pattern, texture, relief and seeing through The techniques of expression on the modern knitwears are expressed characteristic of variety and composition, are expended to the art wear by translated into art. According to a wide sense, ecology, ethnic, modern are the themes of knitwears of 1990's after. The characteristic technique of expression according to the themes are expressed by the harmony of image, yarn, color, silhouette, techniques of expression. The modern knitwears are tried by mixed and various techniques, developed to the area of art wear, escaping from simple and practical item.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1029_1030
• /
• 2009

본 논문에서는 빔 에너지를 이용하여 내 마모 및 내 부식성을 갖는 철망을 가공하여, 빔 에너지 조사 전과 후의 SEM 사진과 인장강도를 측정하여 비교, 분석 하였다. 전자빔으로 표면을 개질하기 전보다 후의 표면이 더 치밀해짐을 SEM사진을 통하여 볼 수 있었고, 인장강도를 측정 하여 개질 전과 후를 비교 하였는데, 인장강도와 관련된 탄성계수가 더 크게 나타나 전자빔 조사에 의한 샘플이 긴 수명을 갖는 요인이 분석되었다.