• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.290-292
• /
• 2007

A twisted nematic type liquid crystal electro-optic modulator (TN-LC modulator) was developed. The modulator used single polarizer and the reflection on-off ratio was maximized by optimization of twist angle and retardation of liquid crystal cell. The TNLC modulator shows better sensitivity and response time than conventional liquid crystal modulator.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.287-288
• /
• 2004

We report on the development of ferronematic liquid crystals, new materials that consist of a dilute suspension of ferroelectric particles in a nematic liquid crystal host. The particles share their ferroelectric properties with the nematic liquid crystal and impose a spontaneous dielectric polarization of about 10 nC/$cm^2$ to the entire medium, typical for many ferroelectric liquid crystals. As expected, these new materials have enhanced dielectric anisotropy and are sensitive to the sign of an applied electric field. The potential of their use in a number of devices are discussed.

• 한국전기전자재료학회논문지
• /
• 제19권6호
• /
• pp.547-551
• /
• 2006

We studied liquid crystal (LC) alignment with ion beam (IB) on polyimide and electro-optical characteristics of twisted nematic (TN)-liquid crystal display (LCD) on the polyimide surface using obliquely ion beam (IB) exposure with new IB type equipment. A good uniform alignment of the nematic liquid crystal (NLC) alignment with the ion beam exposure on the polyimide surface was observed. In addition, it can be achieved the good EO properties of the ion-beam-aligned TN-LCD on polyimide surface. Also, the EO characteristics of the ion-beam-aligned TN-LCD on a polyimide (PI) surface with ion beam exposure using new type IB equipment is same or more superior than ion-beam-aligned TN-LCD on a polyimide (PI) surface with ion beam exposure using Kaufman-type Ar ion gun.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 학술대회 및 기술세미나 논문집 디스플레이 광소자
• /
• pp.41-42
• /
• 2006

Carbon nanotubes (CNTs) effects on physical properties of the liquid crystal and twisted nematic (TN) liquid crystal (LC) cells have been investigated. The minute doping of CNTs reduces rotational viscosity of the LC, and thus switching time of the TN cells is improved, especially in grey scale response time. In addition, the dielectric anisotropy and birefringence are not affected by such a small amount of CNT-doping and thus voltage-dependent transmittance remains the same.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.97-100
• /
• 2005

The recent Bistable Nematic ($BiNem{(R)}$) LCD technology presents long term bistability, high level passive matrix multiplexing and high optical quality. The BiNem device, based on anchoring breaking, needs specific low anchoring strength materials - alignment layers and liquid crystal mixtures. We present here our approach to develop nematic mixtures with wide enough temperature range and low zenithal anchoring energy.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.181-184
• /
• 2005

In this paper, we have improved a novel fast response time liquid crystal operating mode using tilt angle in the unique condition by hot-plate equipment. The new control of tilt angle for nematic liquid crystal (NLC) with negative and positive dielectric anisotropy on the rubbed homeotropic polyimide (PI) using baking method by Hot-plate equipment was investigated. LC tilt angle decreased with increasing baking temperature and time. Especially, the low LC tilt angle of positive type NLC (${\Delta}n$>0) on the rubbed homeotropic PI surface by increasing temperature and time was measured. The EO characteristics of the high tilted OCB(HTOCB) mode using control of tilt angle on the homeotropic surface than that of conventional OCB cell can be improved. We suggest that the developed the HTOCB cell using control of tilt angle on the homeotropic surface is a promising technique for the achievement of a fast response time and a high contrast ratio.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권1호
• /
• pp.15-19
• /
• 1997

The characteristics of the response time and the viewing angle on twisted nematic (TN) liquid crystal display (LCD) and amorphous (a)-TN-LCD without rubbing were investigated. To measure the tansmission-voltage, response time, and viewing angle characteristics, we prepared three kinds of LC cells and then studied the surface liquid crystal alignment effect. It was found that the response time on A-TN-LCD was fast compared to the TN-I-CD, and the weak anchoring strength was attributed to the fast response time on a-TN-LCD. Also, we obtained the wide viewing angle characteristics on a-TN-LCD. The liquid crystal alignment of LCD device for electro-optical characteristics is discussed in the present paper.

• Macromolecular Research
• /
• 제15권6호
• /
• pp.487-490
• /
• 2007

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1933-1935
• /
• 2002

In this paper, we present a study of the structure and electro-optic behavior of hybrid liquid-crystal-silica sphere composite photonic crystals, formed by filling the (26% by volume) void space of fee (face centered cubic) silica opals infiltrated with a nematic liquid crystal. Three dimensional photonic crystals of visible range were fabricated via a self assembly method of silica spheres of submicron diameter. The expected fee structure was confirmed by scanning electron microscopy (SEM) of the dehydrated crystal with glass removed. The photonic crystal exhibited significant electric-field-induced shift of the optical Bragg reflection peak when the liquid crystal has the long molecular axis oriented parallel to the sphere surfaces.

• Journal of Information Display
• /
• 제3권3호
• /
• pp.17-23
• /
• 2002

In this work we report methods of formation of three-dimensional structures of particles in a liquid crystal host. We found that, under the appropriate conditions, the particles are captured and dragged by the moving isotropic/nematic front during the phase transition process. This movement of the particles can be enhanced significantly or suppressed drastically with the influence of an electric field and/or with changing the conditions of the phase transition, such as the rate of cooling. As a result, a wide variety of particle structures can be obtained ranging from a fine-grained cellular structure to stripes of varying periods to a course-grained "root" structures. Changing the properties of the materials, such as the size and density of the particles and the surface anchoring of the liquid crystal at the particle surface, can also be used to control the morphology of the three-dimensional particle network and adjust the physical properties of the resulting dispersions. These particle structures may be used to affect the performance of LCD's much as polymers have been used in the past.