• 전기의세계
• /
• 제38권10호
• /
• pp.4-12
• /
• 1989

최근에는 전자 장치가 소형화, 경량화되는 추세이다. 이러한 전자 장치와 인간의 접속 방법으로 표시기(display)가 사용된다. 표시 기술은 표1에 나타난 것처럼 CRT, PDP, LCD, ECD, 기타 등으로 구별할 수 있다. 그중에서 LCD(Liquid Crystal Display)는 낮은 전력 소모, 낮은 구동 전압, 소형, 경량, gray scale 기능, 저가격 등의 장점이 있기 때문에 많은 연구가 수행되고 있다. 액정 지시기는 외부 전장에 의한 분자의 배열이 이루어져, 빛을 선별 투과 혹은 반사시켜 빛의 세기를 조절하는 특성을 이용하여 정보 전달 기능을 갖는다. LCD는 시계, 전자계산기, TV, 컴퓨터 단말기 등에 이용된다. LCD에 사용되는 액정은 구조적 특성에 따라서 semetic, cholestic, nematic액적으로 분류된다. 그런데 nematic액정이 분자 재배열에 필요한 반응 시간이 가장 빠르기 때문에 많이 사용된다.

• 한국전기전자재료학회논문지
• /
• 제14권1호
• /
• pp.54-57
• /
• 2001

We have developed a new multidomain vertical-alignment (MVA) mode using a homeotropic photopolymer that provides a wider viewing angle for nematic liquidcrystal (NLC) with negative dielectric anisotropy. Good voltage-transmittance curves for he new MVA cell using the homeotropic photopolymer were observed. The viewing angle of the new MVA cell using the homeotropic photopolymer was wider than that of the conventional VA cell. The wide viewing angle using the new MVA cell is attributable to 4-domain by the ribs with UV exposure on the photopolymer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.292-294
• /
• 2008

We have developed new reflective LCD for Mixed twist nematic LC mode with high quality image. We have found out an optimal twist angle of LC and optical film's axis by simulation. Also we measured electro-optic characteristics for new design panel. As a result, high reflectance and wide viewing angle characteristics were achieved.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.489-492
• /
• 2001

본 논문에서는 효율적인 홀로그래픽 데이타 저장을 위해, 세기변조를 통한 2차원 이진데이타를 표현함에 있어서 가변적이고 이산적인 랜덤 위상마스크를 함께 사용하는 방법을 연구했다. 가변 위상 마스크는 twisted nematic LCD를 사용해 구현했다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 제15회 정기총회 및 동계학술발표회
• /
• pp.138-139
• /
• 2004

In this paper, we propose a reflective In-Plane Switching twisted nematic mode with negative liquid crystal and weak surface anchoring energy (10$^{-6}$ J/m) in order to enhance reflectance and cellgap margin.

• 대한전자공학회논문지SD
• /
• 제39권12호
• /
• pp.1071-1079
• /
• 2002

본 논문에서는 액정 셀에서 전압에 따른 액정 거동을 수치 해석적으로 계산하는 방법과 그 적용 예를 보고한다. 액정 거동을 해석하기 위해 복잡한 구조에 적용이 용이한, 3차원 유한요소법을 사용하여 액정 셀 내부의 전압 분포를 계산하였다. 액정 셀 내부에 대한 자유에너지 밀도를 고려하였으며, 에릭슨-레슬리(Ericksen-Leslie) 방정식과 라플라스(Laplace) 방정식을 해석함으로서 액정 셀의 스위칭 특성을 계산하였다. 액정 방향자 분포를 이용하여 액정 셀의 광투과 특성을 Berreman's 4$\times$4 방법으로 계산하였고, 문턱 전압과 응답 속도를 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제16권4호
• /
• pp.322-329
• /
• 2003

We have studied how surface pretilt angle affects generation of disclination line in liquid-crystal-on silicon cells for 45$^{\circ}$-twisted nematic (TN) and vertical alignment (VA) modes with pixel size of 15$\mu\textrm{m}$. Our studies show that when the pretilt angle is increased from 0$^{\circ}$to 3$^{\circ}$ in the 45$^{\circ}$-TN cell, the disclination line at left side of on-pixel becomes weak and is well suppressed with $\theta$$\_$p/=3$^{\circ}$ although the pixel size Is decreased. In the VA cell, when the pretilt angle is decreased from 89$^{\circ}$ to 86$^{\circ}$, the disclination line at right side of the on-pixel is suppressed well and even for a smaller pixel size, it does not exist when $\theta$$\_$p/=86$^{\circ}$. The results inform that the pretilt angle strongly affects the image quality of microdisplays.

• 한국전기전자재료학회논문지
• /
• 제17권3호
• /
• pp.305-310
• /
• 2004

We have studied the optimal phase retardation value of a homogeneously aligned liquid crystal (LC) driven by fringe-field when using the LC with positive dielectric anisotropy. In general, the transmittance of a homogeneous aligned LC cell under crossed polarizer is maximum when a twist angle of LC by in-plane rotation is 45$^{\circ}$ with polarizer and the cell retardation becomes λ/2. However, the device using the LC with positive dielectric anisotropy does not follow this since the degree of rotation of the LC is dependent on electrode position and in addition the LCs tilt up along the fringe-field. At the center of common and pixel electrode, the LC is most twisted around a middle position of a cell whereas at the edge position of pixel electrode, the LC is most twisted near bottom surface of a cell. Consequently, the optimal phase retardation of the device becomes much larger than λ/2 and the transmittance can be described using the combination of the in-plane switching and twisted nematic mode.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.664-667
• /
• 2009

We would like to show a measuring technique of azimuthal anchoring energy of the nematic liquid crystals. The electro-optical setup of liquid crystal cell, crossed polarizers and magnetic field was assumed. The planar or hybrid alignment cells were prepared. The director in the light entering substrate and the polarization of light was adjusted into parallel to the magnetic field. The director orientation of exit substrate and analyser maintained perpendicular to the magnetic field. As the magnetic field strength is increased, the director deviates from the easy axis and rotates to the field direction. We obtained an equation calculating the change of transmission with the field and measured experimentally the transmission. By comparing the calculating and experimental data, we obtained the azimuthal anchoring strength.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.208-208
• /
• 2009

We used Brewster's Law to examine the mechanism of liquid crystal (LC) alignment on an organic insulation layer when subjected to ion-beam irradiation. Brewster's Law implies that the maximum rate polarized ray on a slanted insulation layers on the substrate and it illustrates the dependence of polarization and themechanical structure on the ion beam irradiation process. The pretilt angle of nematic LCs on the organic insulation surface was about $1.13^{\circ}$ for an ion beam exposure of $45^{\circ}$ for 1 minute at 1800eV. This shows the dependence of LC alignment on the polarization ratio in a slanted organic insulation layer.