• 한국물환경학회지
• /
• 제29권4호
• /
• pp.559-567
• /
• 2013

In recent years, NF (nanofiltration) membrane has been receiving great attention for hardness removal and has begun to replace traditional lime soda ash softening process, particularly in Florida, USA, mainly due to less sludge production and easy operation. This study aimed to provide detailed surface characteristics of various commercial NF membranes by performing sophisticated surface analysis, which would help more fundamentally understand the performance of NF membranes. More specifically, a total of 7 NF membranes from top NF/RO manufacturers in the world were examined for basic performance tests, surface analysis, and fouling potential assessment. The results demonstrated that NF membranes are classified into two groups in terms of surface zeta potential; they are highly negatively charged ones, and neutral and/or less negatively charged ones. Their hydrophobicities, measured by contact angle, varied from hydrophilic to slightly hydrophobic ones. The AFM measurements showed various surface roughness, ranging from 23 nm (smooth) to 162 nm (rough) of average peak height. Lab-scale fouling experiments were performed using feedwater obtained from conventional water treatment plants in the province of Korea, and their results attempted to correlate to surface characteristics of NF membranes. However, unlike typical RO membranes, no clear correlation was found in this study, indicating that fouling mechanisms of NF membrane may be different from those of typical RO membranes, and both cake deposition and pore blocking mechanisms should be considered simultaneously.

• Journal of Microbiology and Biotechnology
• /
• 제16권6호
• /
• pp.880-888
• /
• 2006

Pleurocidin, an $\alpha$-helical cationic antimicrobial peptide, was isolated from skin mucosa of winter flounder (Pleuronectes americamus). It had strong antimicrobial activities against Gram-positive and Gram-negative bacteria, but had very weak hemolytic activity. The Gly$^{13,17}\rightarrow$Ala analog (pleurocidin-AA) showed similar antibacterial activities, but had dramatically increased hemolytic activity. The bacterial cell selectivity of pleurocidin was confirmed through the membrane-disrupting and membrane-binding affinities using dye leakage, tryptophan fluorescence blue shift, and tryptophan quenching experiments. However, the non-cell-selective antimicrobial peptide, pleurocidin-AA, interacts strongly with both negatively charged and zwitterionic phospholipid membranes, the latter of which are the major constituents of the outer leaflet of erythrocytes. Circular dihroism spectra showed that pleurocidin-AA has much higher contents of $\alpha$-helical conformation than pleurocidin. The tertiary structure determined by NMR spectroscopy showed that pleurocidin has a flexible. structure between the long helix from $Gly^3$ to $Gly^{17}$ and the short helix from $Gly^{17}$ to $Leu^{25}$. Cell-selective antimicrobial peptide pleurocidin interacts strongly with negatively charged phospholipid membranes, which mimic bacterial membranes. Structural flexibility between the two helices may play a key role in bacterial cell selectivity of pleurocidin.

• Korea-Australia Rheology Journal
• /
• 제19권2호
• /
• pp.51-59
• /
• 2007

A polyelectrolyte chain confined in a slit nanochannel exhibits a structural transition from the one in free space. In this paper, the effect of the long-range electrostatic interactions between the xanthan polyelectrolyte and the slit wall on the confined xanthan conformation is investigated via the Brownian dynamics simulation. A neutral and two negatively charged surfaces of polydimethylsiloxane (PDMS) and glass are combined to make four kinds of slit channels with different charge characteristics: i) neutral-neutral, ii) glass-glass, iii) neutral-PDMS and iv) neutral-glass walls. Their walls are characterized by uniform surface charge densities determined from experimental data of zeta potential. Both the nonmonotonic chain size variation and the loss of long-range bond vector correlation, previously observed under confinement in the PDMS-PDMS slit, are also found in the neutral slit, demonstrating the nonelectrostatic origin of such crossover behaviors. As expected, the effect of wall charges is negligible at sufficiently high medium ionic strength of 100mM but it becomes significant in the opposite limit of 0.01mM. In the latter case, the high charge density of glass walls strengthens the effective confinement of a negatively charged polyelectrolyte and produces a xanthan structure comparable to that confined in a much narrower neutral slit. The obtained structural data suggest the possibility of controlling the structure of confined polyelectrolytes by the modification of surface charge characteristics of micro/nanofluidic devices in combination with the adjustment of the medium ionic strength.

• 폴리머
• /
• 제35권5호
• /
• pp.419-423
• /
• 2011

항균제 대체제로 응용하기 위하여 다양한 저분자량 수용성 키토산(LMWSC; MW1, MW3, MW5, MW10)을 제조하였으며, 이들의 항균제 대체제 사용 가능여부와 그 작용 기작에 대하여 연구하였다. 먼저, 다양한 분자량 형태의 LMWSC를 이용하여 사람에게 유해한 각종 박테리아를 이용하여 항균효과를 확인하였고, 그 중 MW10의 항균효과가 가장 우수한 것으로 확인되었다. 그 반면 사람의 적혈구를 이용한 용혈활성 실험에서 독성을 나타내지 않았다. MW10의 항균 효과가 세균의 어느 부분에서 일어나는지 확인하기 위해 박테리아의 세포막 조건(PE/PG=7/3, w/w)으로 인공리포좀을 만들었고, 여기에 MW10을 처리한 결과 세균 막에서 항균효과를 나타냄을 추론할 수 있었다.

• Molecules and Cells
• /
• 제42권6호
• /
• pp.460-469
• /
• 2019

Bacterial ${\alpha}-type$ carbonic anhydrase (${\alpha}-CA$) is a zinc metalloenzyme that catalyzes the reversible and extremely rapid interconversion of carbon dioxide to bicarbonate. In this study, we report the first crystal structure of a hyperthermostable ${\alpha}-CA$ from Persephonella marina EX-H1 (pmCA) in the absence and presence of competitive inhibitor, acetazolamide. The structure reveals a compactly folded pmCA homodimer in which each monomer consists of a 10-stranded ${\beta}-sheet$ in the center. The catalytic zinc ion is coordinated by three highly conserved histidine residues with an exchangeable fourth ligand (a water molecule, a bicarbonate anion, or the sulfonamide group of acetazolamide). Together with an intramolecular disulfide bond, extensive interfacial networks of hydrogen bonds, ionic and hydrophobic interactions stabilize the dimeric structure and are likely responsible for the high thermal stability. We also identified novel binding sites for calcium ions at the crystallographic interface, which serve as molecular glue linking negatively charged and otherwise repulsive surfaces. Furthermore, this large negatively charged patch appears to further increase the thermostability at alkaline pH range via favorable charge-charge interactions between pmCA and solvent molecules. These findings may assist development of novel ${\alpha}-CAs$ with improved thermal and/or alkaline stability for applications such as $CO_2$ capture and sequestration.

• Bulletin of the Korean Chemical Society
• /
• 제13권3호
• /
• pp.248-252
• /
• 1992

$ZrO_2-dopedYb_2O_3solid$ solutions containing 1, 3, 5, 7 and 9 mol% $ZrO_2were$ synthesized from spectroscopically pure $Yb_2O_3$ and $ZrO_2$ powders and found to be rare earth C-type structure by XRD technique. Electrical conductivities were measured as a function of temperatures from 700 to $1050^{\circ}C$ and oxygen partial pressures from 1${\times}$$10^-5$ to 2${\times}$ $10^-1$atm. The electrical conductivities depend simply on temperature and the activation energies are determined to be 1.56-1.68 $_eV$. The oxygen partial pressure dependence of the electrical conductivity shows that the conductivity increases with increasing oxygen partial pressure, indicating p-type semiconductor. The $PO_2$ dependence of the system is nearly power of 1/4. It is suggested from the linearity of the temperature dependence of electrical conductivity and only one value of 1/n that the solid solutions of the system have single conduction mechanism. From these results, it is concluded that the main defects of the system are negatively doubly charged oxygen interstitial in low. $ZrO_2doping$ level and negatively triply charged cation vacancy in high doping level and the electrical conduction is due to the electronic hole formed by the defect structure.

• 생명과학회지
• /
• 제30권5호
• /
• pp.420-427
• /
• 2020

Repebody는 비면역 글로블린 인공 항체로 저렴하고 빠르게 생산 가능한 맞춤형 항체이다. 그러나 의료용 repebody의 생산은 저수율 및 복잡한 정제 공정으로 인해 여전히 어려움을 겪고 있다. Pseudomonas fluorescens의 ABC transporter를 사용한다면 생산 공정을 간소화하고 비용을 줄일 수는 있지만 repebody는 양전하를 띠어 분비 효율이 낮다. 따라서 등전점(pI)이 높은 repebody의 등전점을 낮추어 음전하를 띄도록 해야 한다. 이것을 위해 repebody의 N 말단과 C 말단에 연속된 아스파탐산을 붙여 보았지만 분비가 증가하지 않았다. 다른 방법으로 ABC transporter를 통한 repebody 분비 효율을 높이기 위해 repebody의 항원 결합 부위의 반대쪽에 존재하는 열다섯 개의 양전하 아미노산을 아스파탐산으로 변환하여 repebody 표면이 강한 음전하를 띠도록 하였다. 그 결과, 기존 repebody의 발현 단백질 당 분비효율은 21.2%였으나 변형한 과음전하 repebody의 분비효율은 58.5%로 향상되었다. 결론적으로 과음전하를 통해 만들어진 repebody는 P. fluorescens에 의해 세포 바깥에 분비 생산할 수 있었다.

• Korea-Australia Rheology Journal
• /
• 제15권1호
• /
• pp.1-7
• /
• 2003

A new method is introduced to build up organic/organic multilayer films composed of cationic poly(allylamine hydrochloride) (PAH) and negatively charged poly (sodium 4-styrenesulfonate) (PSS) using the spinning process. The adsorption process is governed by both the viscous force induced by fast solvent elimination and the electrostatic interaction between oppositely charged species. On the other hand, the centrifugal and air shear forces applied by the spinning process significantly enhances desorption of weakly bound polyelectrolyte chains and also induce the planarization of the adsorbed polyelectrolyte layer. The film thickness per bilayer adsorbed by the conventional dipping process and the spinning process was found to be about 4 ${\AA}$ and 24 ${\AA}$, respectively. The surface of the multilayer films prepared with the spinning process is quite homogeneous and smooth. Also, a new approach to create multilayer ultrathin films with well-defined micropatterns in a short process time is Introduced. To achieve such micropatterns with high line resolution in organic multilayer films, microfluidic channels were combined with the convective self-assembly process employing both hydrogen bonding and electrostatic intermolecular interactions. The channels were initially filled with polymer solution by capillary pressure and the residual solution was then removed by the .spinning process.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권4호
• /
• pp.269-273
• /
• 2001

This study presents a new formulation method for improving DNA transfection effi-ciency using a fusogenic peptide and polyethylene glycol-grafted polyethylenimine. Succinimidyls succinate polyethylene glycol (PEG-SSA) was conjugated with polyethylenimine(PEL). PEL is well known for a good endosomal escaping and DNA condensign agent. The positively charged syn-thetic fusogenic peptide, KALA was coated on the negatively charged PEG-g-PEI/DNA and PEI/DNA complexes. The KALA/PEI/ DNA complexes exhibited aggregation behavior at higher KALA coating amount with an effective diameter of around 1,000 nm. However, the LALA/PEG-g-PEI/DNA complexes were 100-300 nm in size with a surface zeta-potential (ζ)value of about +20mV. The conjugated PEG molecules suppressed any KALA-mediated inter-particle aggregation, and thereby improved the transfection efficiency, Consequently, the transfection efficiency of the KALA/PEG-g-PEI/DNA complexes was obtained by utilizing both the fusogenic activity of KALA and the steric repulsion effect of PEC.

• 한국환경과학회지
• /
• 제1권2호
• /
• pp.137-144
• /
• 1992

Flocculation-spectrophotometry and streaming current detector( SCD ) method were investigated and compared in order to determine the optimum dosages of synthetic cationic polymers of different charge density and molecular mass for the removal of humic acid. The optimum dosage for each of the polymers was determined with the dosage at which the lowest absorbance of humic acid was shown for the formal. and was determined with the dosage required during charge neutralization of humic acid for the latter It was in good agreement between both methods and there is a strong inverse correlation between the optimum dosage and charge density of the polymers, with highly charged polymer giving the lowest optimum dosage, pointing out the importance the charge neutralization. By flocculation-spectrophotometry, it was found that the absorbance of humid acid with the amount of each of the polymers dosed, changes sharply for polymers of high charge density, but changes rather broadly for polymers of low and middle charge density, Both methods showed that a stoichiometric correlation exists between the optimum dosage of each of the cationic polymers and the negatively charged humic acid.