• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.207-210
• /
• 2002

This paper describes a design of multiple-mode single-output DC/DC converter which can be used in both up and down conversion. Proposed up/down converter does not produce a negative voltage which is generated in conventional buck-boost type converter. Three types of operation mode(up/down/bypass) are controlled by the input voltage sense and command signals of target output voltage. PFM(pulse frequency modulation) control is adopted and modified for fast tracking and for precise output voltage level with an aid of output voltage sense. Designed DC/DC converter has the performance of less than 5 % ripple and higher than 80 % efficiency. Chip area is 3.50 mm ${\times}$ 2.05 mm with standard 0.35 $\mu\textrm{m}$ CMOS technology.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.3
• /
• pp.443-450
• /
• 2010

An enhanced control strategy for variable-speed unbalanced stand-alone doubly-fed induction generator-based wind energy conversion systems is proposed in this paper. The control scheme is applied to the rotor-side converter to eliminate stator voltage imbalance. The proposed current controller is developed based on the proportional-resonant regulator, which is implemented in the stator stationary reference frame. The resonant controller is tuned at the stator synchronous frequency to achieve zero steady-state errors in rotor currents without decomposing the positive and negative sequence components. The computational complexity of the proposed control algorithm is greatly simplified, and control performance is significantly improved. Finally, simulations and experimental results are presented to verify the feasibility and the robustness of the proposed control scheme.

• Journal of Chest Surgery
• /
• v.25 no.8
• /
• pp.856-862
• /
• 1992

The author reviewed 50 cases of positive sputum AFB patients following pulmonary resection of pulmonary tuberculosis [total 617 cases] operated on at the National Kongju Hospital during 6 years period, from January, 1985 to December, 1990. 1. There were 36 male and 14 female patients ranging from 20 to 50 years old[mean age, 33.8 years] 2. An average duration of pulmonary tuberculosis history was 7.5 years. 35 cases[76%] had many drug resistance of tuberculosis [above 5 drugs]. 3. The majority indication for pulmonary resection were persistent positive sputum AFB with cavity or destroyed lung or hemoptysis. 23 cases[46%] underwent pneumonectoy and 13 cases[23%] lobectomy. The postoperative complications occured in 19 cases [38%]. 4. 34 cases[68%] occured sputum AFB positive following operation unitil 6 months, and 6 cases[12%] occured 2 years later 5. 21 cases[42%] got conversion to negative sputum, and then 29 cases[58%] remained persistent positive sputum.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.274-277
• /
• 1996

This paper describes the realization of the full-color to the degree of nearest white light by compounding high brightness Red, Green and Blue LEDs with appropriate proportional index. Once these three colors; red, green and blue are mixed, they are genearlly additive mixing and produce white light color contrasted to negative mixing. The luminous efficiency is defined as the product of the efficiency(lm/w), which indicates the degree of perceptual response by the human eye to unit energy(W) of light emitted by an active display devises and as the conversion efficiency of the device from electric power consumed to optical energy produced. We will deduce the each number of LEDs theoretically and design several shapes of LED displays for the full-color. Finally theoretical predictions will be compared with the measured data with different type of display designs.

• Journal of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.239-243
• /
• 1983

EHMO calculations were performed on several antitumor active as well as inactive purine antimetabolites. Results showed that the N atom (position 9) which corresponds to the position of sugar (position 10) linkage in DNA bases has a net negative charge for antitumor active whereas it has a positive charge for inactive purines. It was also found that overlap population was the smallest for bond between atoms 9 and 10, which agrees with the experimental findings that antitumor activity is effected after conversion to nucleotide level.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.4
• /
• pp.182-187
• /
• 2007

The use of the pulsed electro acoustic (PEA) method allowed us to perform the direct observations of spatio-temporal charge distributions in Electric double layer capacitors (EDLCs) based on polarizable nanoporous carbonaceous electrode. The negative charge density became the maximum, about $205C/m^3$ at the region where was near to collector layer in EDLCs for case $V_{DC}=2.5V$, while the positively charged density became the maximum, about $61.1C/m^3$ at the region where it was located around the cathode layer. The performance of the best sample was found to be better in terms of the charge density (Cs) and specific energy ($E_s$) with a maximum value of ${\sim}8.4F/g$ and 26 Wh/kg. The $C_s$ obtained from the PEA method agreed well with that from the energy conversion method. The PEA measurement used here is a very useful method to quantitively investigates the spatio-temporal charge distribution in EDLCs.

• KSBB Journal
• /
• v.8 no.1
• /
• pp.17-22
• /
• 1993

$1.96{\times}10^{-5}$(IU/cell/hr) of specific scu-PA production rate was obtained from HEK cells in maintaining ca. $8{\times}10^{5}$(cells/ml) of maximum roll density at 10(ml/hr) of perfusion rate with recycling 20% serum free conditioned media. It can be compared to $4{\times}10^{6}$(cells/ml) of maximum cell density and $4.56{\times}10^{-4}$(IU/cell/hr) of specific production rate in cultivating cells with 1% serum containing medium. Thc conversion ratio of scu-PA to tc-UK increased up to 55% as the recycling ratio increased; however, recycling the used medium seemed to have least negative effect on cell growth. It also showed that the recycling process had definitive advantage of using serum free medium in perfusion cultivation of HEK cell line.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1955-1957
• /
• 2003

This paper presents a novel defected ground structure (DGS) and its application to a microwave oscillator. The presented oscillator is designed so as to use the suggested defected ground structure as a feedback loop inducing a negative resistance as well as a frequency-selective circuit. Applying the feedback loop between the drain and the gate of a FET device produces precise phase conversion in the feedback loop. The equivalent circuit parameters of the DGS are extracted by using a three-dimensional EM calculations and simple circuit analysis method. The implemented 1.07 GHz oscillator exhibits 0 dBm output power with over 15% dc-to-RF power efficiency and -106 dBc/Hz phase noise at 100 kHz offset from carrier.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.12
• /
• pp.1147-1149
• /
• 1996

The trans (2a)-cis (2b) isomerization of [Me2Al(μ-NHtBu)]2 (2) has been studied by 1H NMR spectroscopy. The equilibrium has been observed to follow reversible first order kinetics with ΔH0=2.22±0.07 kJmol-1 and ΔS0=2.85±0.07 JK-1mol-1. The activation parameters for the conversion 2a→2b are ΔH1=49.7±2.3 kJmol-1 and ΔS1=-126.3±0.2 JK-1mo1-1 and for the reverse reaction 2b→2a are ΔH-1=47.5±2.3 kJmol-1 and ΔS-1=-129.1±0.5 JK-1mol-1. The isomerization is markedly accelerated in the presence of Lewis bases. A crossover experiment indicates that the isomer interconversion is a unimolecular process. The large negative entropies of activation suggest either the existence of a sterically congested intermediate or the participation of solvent in the isomerization process.

• New & Renewable Energy
• /
• v.17 no.4
• /
• pp.36-45
• /
• 2021

To remove the Cu secondary phase remaining on the surface of a CIGSSe absorber layer manufactured by the two-step process, KCN etching was applied before depositing the CdS buffer layer. In addition, it was possible to increase the conversion efficiency by air annealing after forming the CdS buffer layer. In this study, various pre-treatment/post-treatment conditions wereapplied to the S-containing CIGSSe absorber layerbefore and after formation of the CdS buffer layer to experimentally confirm whether similareffects as those of Se-terminated CIGSe were exhibited. Contrary to expectations, it was noted that CdS air annealing had negative effects.