• 제목/요약/키워드: Near-infrared

검색결과 1,693건 처리시간 0.04초

COMPARISON OF LOS DOPPLER VELOCITIES AND NON-THERMAL LINE WIDTHS IN THE OFF-LIMB SOLAR CORONA MEASURED SIMULTANEOUSLY BY COMP AND HINODE/EIS

  • Lee, Jae-Ok;Lee, Kyoung-Sun;Seough, Jungjoon;Cho, Kyung-Suk
    • 천문학회지
    • /
    • 제54권2호
    • /
    • pp.49-60
    • /
    • 2021
  • Observations of line of sight (LOS) Doppler velocity and non-thermal line width in the off-limb solar corona are often used for investigating the Alfvén wave signatures in the corona. In this study, we compare LOS Doppler velocities and non-thermal line widths obtained simultaneously from two different instruments, Coronal Multichannel Polarimeter (CoMP) and Hinode/EUV Imaging Spectrometer (EIS), on various off-limb coronal regions: flaring and quiescent active regions, equatorial quiet region, and polar prominence and plume regions observed in 2012-2014. CoMP provides the polarization at the Fe xiii 10747 Å coronal forbidden lines which allows their spectral line intensity, LOS Doppler velocity, and line width to be measured with a low spectral resolution of 1.2 Å in 2-D off limb corona between 1.05 and 1.40 RSun, while Hinode/EIS gives us the EUV spectral information with a high spectral resolution (0.025 Å) in a limited field of view raster scan. In order to compare them, we make pseudo raster scan CoMP maps using information of each EIS scan slit time and position. We compare the CoMP and EIS spectroscopic maps by visual inspection, and examine their pixel to pixel correlations and percentages of pixel numbers satisfying the condition that the differences between CoMP and EIS spectroscopic quantities are within the EIS measurement accuracy: ±3 km s-1 for LOS Doppler velocity and ±9 km s-1 for non-thermal width. The main results are summarized as follows. By comparing CoMP and EIS Doppler velocity distributions, we find that they are consistent with each other overall in the active regions and equatorial quiet region (0.25 ≤ CC ≤ 0.7), while they are partially similar to each other in the overlying loops of prominences and near the bottom of the polar plume (0.02 ≤ CC ≤ 0.18). CoMP Doppler velocities are consistent with the EIS ones within the EIS measurement accuracy in most regions (≥ 87% of pixels) except for the polar region (45% of pixels). We find that CoMP and EIS non-thermal width distributions are similar overall in the active regions (0.06 ≤ CC ≤ 0.61), while they seem to be different in the others (-0.1 ≤ CC ≤ 0.00). CoMP non-thermal widths are similar to EIS ones within the EIS measurement accuracy in a quiescent active region (79% of pixels), while they do not match in the other regions (≤ 61% of pixels); the CoMP observations tend to underestimate the widths by about 20% to 40% compared to the EIS ones. Our results demonstrate that CoMP observations can provide reliable 2-D LOS Doppler velocity distributions on active regions and might provide their non-thermal width distributions.

Analysis of Spectral Reflectance Characteristics Using Hyperspectral Sensor at Diverse Phenological Stages of Soybeans

  • Go, Seung-Hwan;Park, Jin-Ki;Park, Jong-Hwa
    • 대한원격탐사학회지
    • /
    • 제37권4호
    • /
    • pp.699-717
    • /
    • 2021
  • South Korea is pushing for the advancement of crop production technology to achieve food self-sufficiency and meet the demand for safe food. A medium-sized satellite for agriculture is being launched in 2023 with the aim of collecting and providing information on agriculture, not only in Korea but also in neighboring countries. The satellite is to be equipped with various sensors, though reference data for ground information are lacking. Hyperspectral remote sensing combined with 1st derivative is an efficient tool for the identification of agricultural crops. In our study, we develop a system for hyperspectral analysis of the ground-based reflectance spectrum, which is monitored seven times during the cultivation period of three soybean crops using a PSR-2500 hyperspectral sensor. In the reflection spectrum of soybean canopy, wavelength variations correspond with stages of soybean growths. The spectral reflection characteristics of soybeans can be divided according to growth into the vegetative (V)stage and the reproductive (R)stage. As a result of the first derivative analysis of the spectral reflection characteristics, it is possible to identify the characteristics of each wavelength band. Using our developed monitoring system, we observed that the near-infrared (NIR) variation was largest during the vegetative (V1-V3) stage, followed by a similar variation pattern in the order of red-edge and visible. In the reproductive stage (R1-R8), the effect of the shape and color of the soybean leaf was reflected, and the pattern is different from that in the vegetative (V) stage. At the R1 to R6 stages, the variation in NIR was the largest, and red-edge and green showed similar variation patterns, but red showed little change. In particular, the reflectance characteristics of the R1 stage provides information that could help us distinguish between the three varieties of soybean that were studied. In the R7-R8 stage, close to the harvest period, the red-edge and NIR variation patterns and the visible variation patterns changed. These results are interpreted as a result of the large effects of pigments such as chlorophyll for each of the three soybean varieties, as well as from the formation and color of the leaf and stem. The results obtained in this study provide useful information that helps us to determine the wavelength width and range of the optimal band for monitoring and acquiring vegetation information on crops using satellites and unmanned aerial vehicles (UAVs)

수직 축 회전형 측각기 제작 및 야외 지표면 반사도 관측 시험: 타프와 잔디에서 (Observation Test of Field Surface Reflectance Using Vertical Rotating Goniometer on Tarp Surface and Grass)

  • 문현동;조은이;김현기;조유나;김보경;안호용;류재현;조재일
    • 대한원격탐사학회지
    • /
    • 제38권6_1호
    • /
    • pp.1207-1217
    • /
    • 2022
  • 농업의 새로운 패러다임인 디지털 농업에서는 원격탐사 기법을 이용하여 작물 생육을 지속으로 감시하며 상태를 신속히 정보화하고 있다. 대표적으로 작물의 생육·생리적 변화에 대한 선택적인 파장 반사도 변화를 기반으로 한 식생지수가 주로 사용되어진다. 하지만 식생 표면의 분광 반사도는 이방성을 갖기 때문에 태양 위치와 지면 관측 방향에 따라 변할 수 있어 식생지수 값이 작물의 상태를 나타내지 못하고 왜곡될 수 있다. 본 연구에서는 야외용 측각기를 제작하여 타프(tarp)와 잔디 식생에서 시험 운영하였다. 램버시안 표면과 유사한 성질의 타프에서는 Blue, Green, Red, 근적외선 파장에 대해 대체적으로 타프의 속성 반사도와 유사하게 측정되었다. 하지만, 흐린 날은 센서 천정각이 커질수록 반사도가 과대 측정되는 경향을 보였다. 잔디에서 주요 식생지수의 상대 차잇값을 보았을 때, 태양과 센서 천정각에 대해 visible atmospherically resistant index (VARI)와 vegetation index green (VIgreen),simple ratio (SR), normalized difference vegetation index (NDVI), enhanced vegetation index (EVI) 순으로 민감하였다. 측각기를 통해서 직접 관측된 자료들은 원격탐사 기반의 반사도 기반 식생지수를 보다 정확하게 산출하는데 기여할 수 있을 것이다.

정맥검출기의 NIR LED 수량에 따른 검출된 정맥 이미지 비교에 관한 연구 (A Study on the Comparison of Detected Vein Images by NIR LED Quantity of Vein Detector)

  • 조재현;정진형;김승훈;이상식
    • 한국정보전자통신기술학회논문지
    • /
    • 제15권6호
    • /
    • pp.485-491
    • /
    • 2022
  • 정맥주사는 입원환자에게 가장 빈번하게 행해지는 침습적 처치로서 비경구 영양투여, 혈액제제 등의 투입 등에 광범위하게 이용되고 있으며 이외에도 말초 카테터 삽입, 채혈, 기타 IV 요법에 사용되는 시술로서 연간 10억 건 이상이 발생한다. 정맥주사는 정맥주사 교육을 받은 숙련된 간호사들에 의해서만 시술되는 어려운 시술 중에 하나이며 실패 시 정맥에 혈전증 및 혈종이나 신경 손상 등을 초래할 수 있다. 이에 정맥주사 시 실수를 줄이기 위해 손등이나 팔의 정맥 구조를 시각화할 수 있는 보조 장비들에 대한 연구들이 발표되고 있다. 본 연구는 정맥주사 시 정맥을 시각화하는 정맥 검출기에 850nm 파장대를 조사하는 LED의 수량에 따른 성능 차이에 대한 연구이다. 피부 위에 조사된 NIR 검출기능이 있는 CCD 및 CMOS 카메라 렌즈에 NIR Filter 부착하여 영상을 획득하고 획득된 영상을 영상처리 알고리즘을 통해 정맥 이미지를 선명화하고 선명화된 이미지를 피부 위에 투영하는 원리로 작동되는 정맥 검출기를 제작한 이후 제작된 정맥 검출기 앞단에 NIR LED 수량에 차이를 주어 4가지 LED PCB를 제작했다. 이후 각각의 PCB를 정맥 검출기 앞단에 부착하여 정맥 영상을 검출하고 성능평가를 위해 획득한 정맥 영상을 바탕으로 성능 비교 설문지를 만들어 설문을 실시했다. 설문은 K병원에 재직 중인 간호사 20명을 대상으로 진행했다.

라이다 반사형 중공구조 검은색 물질의 개발 및 코어 에칭 폐액 재활용을 통한 반도체용 에폭시 몰딩 컴파운드 응용 (Synthesis of LiDAR-reflective Hollow-structured Black Materials and Recycling of Their Etched Waste for Semiconductor Epoxy Molding Compound)

  • 김하영;김민정;김지원;제갈석;박선영;정종문;윤창민
    • 유기물자원화
    • /
    • 제31권1호
    • /
    • pp.5-14
    • /
    • 2023
  • 연구에서는 실리카/티타니아 코어/쉘(STCS) 물질을 기반으로 환원 및 에칭을 통해 근적외선 반사율을 향상시킬 수 있는 라이다 반사형 중공구조 검은색(B-HST) 물질을 제조하였다. 또한, 에칭 폐액을 수거 및 재활용하여 합성한 실리카(e-SiO2) 물질을 반도체 에폭시 몰딩 컴파운드용(EMC) 필러 소재로서 응용하였다. 상세히는, 연속적인 졸-겔법, 환원법 및 초음파법을 통해 제조한 B-HST 물질은 높은 NIR 반사율(31.1%)과 실제 검은색 페인트와 유사한 명도(L*=13.2)를 나타내었으며, 이를 통해 성공적으로 라이다에 인식될 수 있는 소재가 제조되었음을 확인하였다. 추가적으로, B-HST 물질의 합성 과정에서 코어 실리카를 에칭하여 추출한 실라놀 전구체를 포함하는 에칭 폐액을 수거한 뒤, 졸-겔법을 통해 균일한 필러용 실리카로 합성하였으며, 에폭시 고분자 및 카본블랙과의 혼합을 통해 반도체 패키지용 소재인 EMC로 제조하였다. 실험으로 제조된 EMC는 상용화된 EMC 제품과 유사한 물리적-화학적 특성을 나타냄을 확인할 수 있었다. 본 연구 결과를 통해 물질의 합성과 효과적인 재활용법의 설계를 통하여 4차 산업시대에 부합하는 고부가 가치 소재들인 자율주행차 차량용 검은색 물질과 반도체용 EMC 물질들을 성공적으로 제조하고 미래 산업에서의 응용 가능성에 대해 제시하였다.

FT NIR 분광법 및 이진분류 머신러닝 방법을 이용한 소나무 종자 발아 예측 (Prediction of Germination of Korean Red Pine (Pinus densiflora) Seed using FT NIR Spectroscopy and Binary Classification Machine Learning Methods)

  • 김용율;구자정;구다은;한심희;강규석
    • 한국산림과학회지
    • /
    • 제112권2호
    • /
    • pp.145-156
    • /
    • 2023
  • 본 연구에서는 -18℃ 및 4℃에서 18년간 저장된 소나무 종자 963개에 대해 FT NIR 스펙트럼을 조사하여 7개 머신러닝 방법(XGBoost, Boosted Tree, Bootstrap Forest, Neural Networks, Decision Tree, Support Vector Machine, PLS-DA)을 이용한 종자발아 예측모델을 만들고, 그 성능을 비교하였다. XGBoost 및 Boosted Tree 모델의 예측성능이 가장 우수하였으며, 정확도, 오분류율 및 AUC 값은 각각 0.9722, 0.0278, 0.9735과 0.9653, 0.0347, 0.9647이었다. 2개 모델에서 종자발아 유무를 예측하는 데 있어 상대적 중요도가 높았던 54개 파수 변수들에 대한 파장대는 크게 6개(811~1,088 nm, 1,137~1,273 nm, 1,336~1,453 nm, 1,666~1,671 nm, 1,879~2,045 nm, 2,058~2,409 nm) 그룹으로 나눌 수 있었으며, 방향족 아미노산, 셀룰로스, 리그닌, 전분, 지방산 및 수분과 관련된 것으로 추정되었다. 이상의 결과를 종합할 때, 본 연구에서 얻어진 FT NIR 스펙트럼 데이터과 2개의 머신러닝 모델은 소나무 저장종자의 발아 유무를 정확도 96% 이상으로 예측할 수 있기에 장기저장 종자 유전자원의 비파괴적 활력검정에 유용하게 활용될 수 있을 것으로 생각된다.

근적외선 분광법과 머신러닝을 이용한 메꽃과(Convolvulaceae) 식물의 분류 (Classification of Convolvulaceae plants using Vis-NIR spectroscopy and machine learning)

  • 이용호;손수인;홍선희;김창석;나채선;김인순;장민상;오영주
    • 환경생물
    • /
    • 제39권4호
    • /
    • pp.581-589
    • /
    • 2021
  • 본 연구는 메꽃과 6종의 식물에 대해 신속하고 비파괴적으로 분류하기 위해 근적외선(Vis-NIR) 스펙트럼을 이용하였고 데이터의 전처리와 머신러닝 기술을 적용하였다. 전국적으로 분포하는 메꽃과 6종에 대해 야외에서 휴대용 분광기를 이용하여 판별하였다. 식물의 잎의 표면에서 400~1,075 nm의 근적외선 스펙트럼(1.5 nm)을 수집하였다. 수집된 스펙트럼 데이터는 3가지의 전처리와 raw데이터를 이용하였고 4종류의 머신러닝 모델을 적용하여 높은 판별 정확도를 확인하였다. 전처리와 머신러닝 모델의 조합을 통해 분석된 판별의 정확도는 43~99%의 범위로 분석되었고, standard normal variate 전처리와 support vector machine 머신러닝 모델의 조합에서 판별 정확도가 98.6%로 가장 높게 나타났다. 본 연구에서 수집된 스펙트럼은 식물의 성장단계, 다양한 측정 지역 및 잎에서의 측정 위치 등과 같은 요인과 더불어 데이터 분석을 위한 조건으로 최적의 전처리와 머신러닝 기술을 적용한다면 메꽃과 식물의 야외에서의 정확한 분류가 가능하고 이들 식물의 효과적인 관리와 모니터링에 활용할 수 있을 것으로 판단되었다.

Comparative evaluation of photobiomodulation therapy at 660 and 810 nm wavelengths on the soft tissue local anesthesia reversal in pediatric dentistry: an in-vivo study

  • Ankita Annu;Sujatha Paranna;Anil T. Patil;Sandhyarani B.;Adhithi Prakash;Renuka Rajesh Bhurke
    • Journal of Dental Anesthesia and Pain Medicine
    • /
    • 제23권4호
    • /
    • pp.229-236
    • /
    • 2023
  • Background: Local anesthesia has been reliably used to control pain during dental procedures and is important in pediatric dentistry. However, children occasionally complain of prolonged numbness after dental treatment, leading to several problems. Studies conducted to reverse the effect of local anesthesia using phentolamine mesylate and photobiomodulation therapy (PBM) are encouraging but limited. PBM is a type of light therapy that utilizes visible and near-infrared non-ionizing electromagnetic spectral light sources. Hence, this study used this modality to compare the reversal of local anesthesia at two different wavelengths. This study compared the effect of PBM at 660 and 810 nm wavelengths on the reversal of soft tissue local anesthesia using a diode LASER in pediatric dentistry. Method: Informed consent and assent were obtained, and the participants were then divided randomly into three groups of 20 children each: control group-without LASER irradiation, LASER irradiation at 660 nm, and LASER irradiation at 810 nm. Sixty children aged 4-8 years with deciduous mandibular molars indicated for pulp therapy were administered an inferior alveolar nerve block. After 45 min of injection, a duration that was similar to the approximate duration of treatment, they were exposed to 660- and 810-nm LASER irradiation according to their groups until reversal of local anesthesia was achieved. The control group did not undergo LASER irradiation. The reversal of the soft tissue local anesthetic effect was evaluated using palpation and pin prick tests every 15 min, and the LASER irradiation cycle continued until reversal of the soft tissue local anesthesia was achieved. Results: A significant reduction of 55.5 min (27.6%) in the mean soft tissue local anesthesia reversal time was observed after the application of 810 nm wavelength PBM and 69 min (34.7%) after 660 nm wavelength LASER irradiation. Conclusion: PBM with a 660 nm wavelength was more effective in reducing the mean soft tissue local anesthesia reversal duration, and thus can be used as a reversal agent for soft tissue local anesthesia in pediatric dentistry.

벼 도열병 발생 탐지 및 확산 모니터링을 위한 기상자료, 위성영상, 드론영상의 공동 활용 (Utilization of Weather, Satellite and Drone Data to Detect Rice Blast Disease and Track its Propagation)

  • 류재현;안호용;이경도
    • 한국농림기상학회지
    • /
    • 제25권4호
    • /
    • pp.245-257
    • /
    • 2023
  • 우리나라 대표적인 식량 작물인 벼는 넓은 면적에서 장기간 재배되어 병해충에 대한 저항성이 낮아지고 있다. 대표적인 벼 질병 중 하나인 도열병이 대규모로 발생하면 수확량이 감소하여 조기에 병을 발견하고 방제를 하여야 한다. 하지만 농지 중심에서 도열병이 발생 하면 육안으로 병을 발견하기 어렵다. 드론을 이용한 작물 모니터링 기법은 생육 이상을 탐지하는데 유용하나 언제 발생할지 모르는 도열병 발생을 위해 빈번하게 촬영을 하는 것은 많은 인력과 비용이 소모된다. 본 연구의 목적은 드론, 위성과 같은 원격탐사 자료와 기상자료를 공동 활용하여 벼 도열병을 조기에 탐지하는 것이다. 위성영상은 벼 재배 필지를 추출하는데 유용하였다. 식생지수와 수분지수의 특성을 이용하여 관개가 된 논을 효과적으로 탐지하였다. 이후 기온, 상대습도, 강우일수 자료를 활용하여 벼 도열병 발생위험도를 계산하였다. 도열병 발생위험도가 증가하면 병이 발생할 가능성이 높아진다는 것을 의미하며, 해당 시점에 드론 관측을 수행하였다. 병이 발생한 지점, 병이 발생한 지점과 일반 벼가 혼재되어 있는 지점, 일반 벼 지점에서 분광반사도의 변화를 살펴보았으며, 갈색 병반을 가지는 도열병 특성상 적색과 근적외선 파장대에서 분광반사도의 변화가 급격한 것을 확인하였다. 도열병이 발생한 지점에서는 주변 지점에 비해 식생지수 값이 낮은 군집이 나타났으며, 시계열 드론 영상을 통해 해당 지점으로부터 벼 도열병 확산을 추적하였다. 최종적으로 수확 전 드론 영상을 활용하여 필지별 도열병 발생률에 대한 공간정보를 생산하였다.

태양전지 성능향상을 위한 하향변환 형광체의 합성 및 특성평가 (Synthesis and Characteristic Evaluation of Downward Conversion Phosphor for Improving Solar Cell Performance)

  • 김재호;김가람;최진토;김수종
    • 문화기술의 융합
    • /
    • 제9권5호
    • /
    • pp.523-528
    • /
    • 2023
  • 금속염 수용액과 고분자 매개체를 출발물질로 사용한 액상합성법으로 적색 파장을 방출하는 형광체를 합성하여, 태양전지 성능향상을 위한 소재로서의 적용 가능성을 검토하였다. Ca, Zn, Al, Eu 등 금속의 질산염을 사용하여 수용액을 제조하고 이것을 식물성 고분자인 전분에 함침시킨 전구체를 소결하여 CaZnAlO:Eu 형광체 분말을 합성하였다. 합성한 CaZnAlO:Eu 형광체 분말의 표면구조 및 성분분석을 주사전자현미경(SEM)과 에너지분산형 X-선분광법(EDS)으로 분석하였다. PL측정 결과 650-780nm의 근적외선영역의 발광파장을 가지는 적색형광체가 성공적으로 합성되었다. XRD 분석결과 단일상을 가진 순수한 CZA:Eu3+ 형광체가 합성된 것을 확인하였다. SEM, EDS 분석 결과 합성한 Ca14Zn6Al9.93O35:Eu3+0.07 형광체 분말의 입도가 균일하며, 부활제로 사용한 Eu 이온이 존재하고 있는 것을 알 수 있다. 합성된 CZA:Eu3+ 형광체는 자외선이나 가시광선을 근적외선영역의 파장으로 하향변환하여 태양전지의 광 흡수효율을 높일 수 있는 소재로 활용될 수 있다.