• 비파괴검사학회지
• /
• 제30권3호
• /
• pp.212-224
• /
• 2010

The usefulness of the magnetic camera for non-destructive testing of aging aircraft is discussed in this paper. The magnetic camera can be used f magnetic particle testing(MT), magnetic flux leakage testing(MFLT), eddy current testing(ECT) and penetration testing(PT). It measures the distribution of a magnetic field and visualizes the magnetic pattern. Near and far side cracks, fatigue, thickness degradation, and cracks under rivets have been detected. The possibility of quantitative evaluation was also examined. Using indirect experiments, we verified the detection ability of the sensor for cracks in titanium and advanced composite materials.

• 천문학회보
• /
• 제44권2호
• /
• pp.74.3-74.3
• /
• 2019

SCUBA-2 North Ecliptic Pole survey, one of the ongoing JCMT large programs, is designed to obtain 850 ㎛ imaging data over ~4 deg² around the NEP based on the AKARI NEP-Wide survey. By August 2019, the program is 50 % complete in terms of observing time, increasing the submillimeter coverage by a factor of 2 with the comparable depth. The rms measured in the deepest center is 0.92 mJy/beam, slightly above the 850 ㎛ confusion limit. With 4 σ detection, the source count is 50 % complete at 9 mJy. The surface density of submillimeter galaxies at this flux limit is 200 deg^-2. Multi-wavelength identification of the 850 ㎛ sources was done through the likelihood analysis based on the far-infrared (250-500 ㎛), mid-infrared (18 ㎛), near-infrared (2-4 ㎛), and optical (i-band) source catalog. We are going to present morphologies and physical properties of 850 ㎛ selected submillimeter galaxies with the help of ancillary multi-wavelength datasets over the NEP area.

• 한국가시화정보학회지
• /
• 제3권1호
• /
• pp.3-19
• /
• 2005

Novel optical techniques are presented for three-dimensional tracking of nanoparticles; Optical Serial Sectioning Microscopy (OSSM) and Ratiometric Total Internal Reflection Fluorescent Microscopy (R-TIRFM). OSSM measures optically diffracted particle images, the so-called Point Spread Function (PSF), and dotermines the defocusing or line-of-sight location of the imaged particle measured from the focal plane. The line-of-sight Brownian motion detection using the OSSM technique is proposed in lieu of the more cumbersome two-dimensional Brownian motion tracking on the imaging plane as a potentially more effective tool to nonintrusively map the temperature fields for nanoparticle suspension fluids. On the other hand, R-TIRFM is presented to experimentally examine the classic theory on the near-wall hindered Brownian diffusive motion. An evanescent wave field from the total internal reflection of a 488-nm bandwidth of an argon-ion laser is used to provide a thin illumination field of an order of a few hundred nanometers from the wall. The experimental results show good agreement with the lateral hindrance theory, but show discrepancies from the normal hindrance theory. It is conjectured that the discrepancies can be attributed to the additional hindering effects, including electrostatic and electro-osmotic interactions between the negatively charged tracer particles and the glass surface.

• 대한기계학회논문집A
• /
• 제23권11호
• /
• pp.1878-1885
• /
• 1999

Ultrasonic technique which is one of the most common nondestructive evaluation techniques has been applied to evaluate the integrity of structures by analyzing the characteristic of scattering sign al from internal defects. Therefore, a numerical analysis of ultrasonic scattering field due to defect profiles is absolutely needed for the accurate, quantitative estimation of internal defects. In this paper, the SH-wave scattering by multi-cavity defects and inclusion using Elastodynamic Boundary Element Method is studied. The effects of shape and distance of defects on transmitted and reflected fields are considered. The interaction of multi-cavity defects in SH-wave scattering is also investigated. Numerical calculations by the BEM have been carried out to predict near field solution of scattered fields of ultrasonic SH-wave. The presented results can be used to improve the detection sensitivity and pursue quantitative nondestructive evaluation for inverse problem.

• 한국농공학회논문집
• /
• 제59권3호
• /
• pp.21-28
• /
• 2017

The main goal of this paper is to assess application of UAV (Unmanned Aerial Vehicle) remote sensing and GIS based images in detection and measuring of rice field drought area in South Korea. Drought is recurring feature of the climatic events, which often hit South Korea, bringing significant water shortages, local economic losses and adverse social consequences. This paper describes the assesment of the near-realtime drought damage monitoring and reporting system for the agricultural drought region. The system is being developed using drought-related vegetation characteristics, which are derived from UAV remote sensing data. The study area is $3.07km^2$ of Wonbuk-myeon, Taean-gun, Chungnam in South Korea. UAV images were acquired three times from July 4 to October 29, 2015. Three images of the same test site have been analysed by object-based image classification technique. Drought damaged paddy rices reached $754,362m^2$, which is 47.1 %. The NongHyeop Agricultural Damage Insurance accepted agricultural land of 4.6 % ($34,932m^2$). For paddy rices by UAV investigation, the drought monitoring and crop productivity was effective in improving drought assessment method.

• 대한원격탐사학회지
• /
• 제33권5_3호
• /
• pp.889-900
• /
• 2017

본 연구에서는 NIR(Near-Infrared) 원격탐사 자료를 이용한 연구의 결과인 논문을 분석함으로써 NIR의 기술 및 활용 연구 분야를 체계적으로 정리하고, 이후 NIR 영상을 활용한 연구의 흐름과 방향을 정립하는 데에 목표가 있다. 이를 위하여 최근 5년간의 국내 저널들과 활용 분야 SCI저널, 기술 개발 분야 SCI저널에 대하여 NIR 활용 연구에 관하여 사례조사를 실시하였다. 선별작업 이후 총 281편의 논문에 대하여 분석을 수행하였으며 통계 분석을 위해 분류와 소분류로 구분하여 우세한 연구 추세를 살펴보았다. 그 결과 논문 작성을 수행한 연구자들의 소속은 대학이 약 60% 이상으로 가장 높았다. 적용 분야의 경우 국외에서 육지 50%, 환경 30% 그리고 재해 11%의 분포를 나타냈다. 한편 국내의 경우 육지 55%, 환경 24%, 재해 10%의 분포를 보였다. 육지에 대한 국내 연구 사례는 임업과 농업이 각각 47%, 28%로 가장 높은 비율을 차지했다. 그 외에 국토관리(17%), 지질/자원과 관련하여 나머지 8%를 차지했다. NIR을 활용한 재해 관측은 산사태, 가뭄, 기상재해, 홍수 등에 활용되었다. 여기서 특히 기상재해는 황사에 관한 연구 결과로 국내의 실정이 반영된 것으로 보인다. 하지만 국내의 연구 사례 중 산불 탐지에 관한 결과가 존재하지 않았다. 국내의 실정을 고려해 볼 때에 이에 관한 추가적이고 활발한 연구가 수행될 필요가 있어 보인다. 이 통계적 논문 분석 자료가 향후 우리나라의 NIR 기술 개발과 활용 분야 확장에 도움이 될 기초 자료로 활용될 수 있기를 기대한다.

• 한국초지조사료학회지
• /
• 제33권3호
• /
• pp.177-184
• /
• 2013

This work was conducted to assess the use of Near-infrared reflectance spectroscopy (NIRS) as a technique to analyze nutritional constituents of Distillers dried grain with solubles (DDGS) and corn quickly and accurately, and to apply an NIRS-based indium gallium arsenide array detector, rather than a NIRS-based scanning system, to collect spectra and induce and analyze calibration equations using equipment which is better suited to field application. As a technique to induce calibration equations, Partial Least Squares (PLS) was used, and for better accuracy, various mathematical transformations were applied. A multivariate outlier detection method was applied to induce calibration equations, and, as a result, the way of structuring a calibration set significantly affected prediction accuracy. The prediction of nutritional constituents of distillers dried grains with solubles resulted in the following: moisture ($R^2$=0.80), crude protein ($R^2$=0.71), crude fat ($R^2$=0.80), crude fiber ($R^2$=0.32), and crude ash ($R^2$=0.72). All constituents except crude fiber showed good results. The prediction of nutritional constituents of corn resulted in the following: moisture ($R^2$=0.79), crude protein ($R^2$=0.61), crude fat ($R^2$=0.79), crude fiber ($R^2$=0.63), and crude ash ($R^2$=0.75). Therefore, all constituents except for crude fat and crude fiber were predicted for their chemical composition of DDGS and corn through Near-infrared reflectance spectroscopy.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.1243-1244
• /
• 2022

In recent years, the growing interest in off-site construction has led to factories scaling up their manufacturing and production processes in the construction sector. Consequently, continuous large-scale site monitoring in low-variability environments, such as prefabricated components production plants (precast concrete production), has gained increasing importance. Although many studies on computer vision-based site monitoring have been conducted, challenges for deploying this technology for large-scale field applications still remain. One of the issues is collecting and transmitting vast amounts of video data. Continuous site monitoring systems are based on real-time video data collection and analysis, which requires excessive computational resources and network traffic. In addition, it is difficult to integrate various object information with different sizes and scales into a single scene. Various sizes and types of objects (e.g., workers, heavy equipment, and materials) exist in a plant production environment, and these objects should be detected simultaneously for effective site monitoring. However, with the existing object detection algorithms, it is difficult to simultaneously detect objects with significant differences in size because collecting and training massive amounts of object image data with various scales is necessary. This study thus developed a large-scale site monitoring system using edge computing and a small-object detection system to solve these problems. Edge computing is a distributed information technology architecture wherein the image or video data is processed near the originating source, not on a centralized server or cloud. By inferring information from the AI computing module equipped with CCTVs and communicating only the processed information with the server, it is possible to reduce excessive network traffic. Small-object detection is an innovative method to detect different-sized objects by cropping the raw image and setting the appropriate number of rows and columns for image splitting based on the target object size. This enables the detection of small objects from cropped and magnified images. The detected small objects can then be expressed in the original image. In the inference process, this study used the YOLO-v5 algorithm, known for its fast processing speed and widely used for real-time object detection. This method could effectively detect large and even small objects that were difficult to detect with the existing object detection algorithms. When the large-scale site monitoring system was tested, it performed well in detecting small objects, such as workers in a large-scale view of construction sites, which were inaccurately detected by the existing algorithms. Our next goal is to incorporate various safety monitoring and risk analysis algorithms into this system, such as collision risk estimation, based on the time-to-collision concept, enabling the optimization of safety routes by accumulating workers' paths and inferring the risky areas based on workers' trajectory patterns. Through such developments, this continuous large-scale site monitoring system can guide a construction plant's safety management system more effectively.

• 천문학회보
• /
• 제37권2호
• /
• pp.82.1-82.1
• /
• 2012

GRB100205A is a Gamma Ray Burst (GRB) which is suspected to be at redshift z=11-13 due to its very red H-K color($(H-K)_{vega}=2.1{\pm}0.5$). We observed a field centered at GRB100205A with Wide Field Camera (WFCAM) at United Kingdom Infrared Telescope (UKIRT) in Hawaii, in order to search a quasar that could be located around the GRB. The images were obtained in J, H, and K filters covering a square area of $0.78deg^2$. Our J-, H-, and K-band data reach the depths of 22.5, 22.1, and 21.0 mag (Vega) at $5{\sigma}$, respectively. Also using z-band image observed by CFHT, we find 8 candidates that have colors consistent with a quasar at z=11-13(non-detection in z-, J-band and $(H-K)_{vega}$ > 1.6). However, the shallow depths of J-, H-band are not enough to verify their true nature. Instead, we identify many red objects to be old or dusty galaxies at $z{\geq}3$. The number density of such objects appears about twice or more than that of the field of Cosmological Evolution Survey (COSMOS) and Ultra Deep Survey (UDS) of UKIRT Infrared deep sky survey (UKIDSS). On scales between 0.18' and 15' the correlation function is well described by a power law with an exponent of ${\approx}-0.9$ and this implies that those objects are like galaxies. It is interesting that many red galaxies exist in the region where the GRB was detected.

• 조명전기설비학회논문지
• /
• 제23권10호
• /
• pp.100-106
• /
• 2009

본 논문에서는 전기설비의 전기적 접속부 또는 전기배선 등에서 발생하는 이상발열을 감지하는 방법에 대해 알아보고, 분전함에서의 발열상태를 실시간으로 모니터링하는 전력설비 진단시스템에 사용되고 있는 광온도센서에 대하여 동작특성을 실험, 분석하였다. 광온도센서의 동작특성 실험을 위한 열원으로는 Black Body와 Hot Plate를 사용하였으며 각각에서의 열원의 온도변화에 따른 광온도센서 출력전압값을 측정, 분석하였다. 그리고 분전함내 차단기 단자에서의 체결불량으로 인한 이상발열 감지 실험을 기존의 발열 감지방법인 열전대와 적외선 열화상장치를 이용하여 실시하였고, 광온도센서를 이용해 실시하여 결과를 비교 분석하였다. 실험결과, 광온도센서의 이상발열 감지능력이 유사함을 확인할 수 있었다. 이러한 분석 결과는 향후 RFID형 광온도센서를 이용한 전력설비 진단시스템의 현장 적용에 있어 기본 자료가 될 것으로 기대된다.