• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.670-673
• /
• 2002

This paper proposes a digital algorithm for gray-scale/color image segmentation of real-time video signals and a cell-network-based implementation architecture in state-of-the-art CMOS technology. Through extrapolation of design and simulation results we predict that about 300$\times$300 pixels can be integrated on a chip at 100nm CMOS technology, realizing very high-speed segmentation at about 1600sec per color image. Consequently real-time color-video segmentation will become possible in near future.

• 제어로봇시스템학회논문지
• /
• 제9권12호
• /
• pp.984-993
• /
• 2003

In Gravure printing process, there are a lot of printing errors caused by expansion and contraction of printing materials and difficulty of printing of small letters, accordingly we cannot detect those errors with eyes. In this paper, we describe the algorithm which can detect small errors automatically in Gravure printing process and a real-time detection system adopting the algorithm. We present the Perimetric Mask algorithm that can eliminate tiny errors occurring near the contour of printing objects to achieve accurate inspection, and also construct an algorithm utilizing symmetry transform which can emphasize tiny errors to make a robust inspection system. We have made a system running in real-time and verified the efficiency of the algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.426-428
• /
• 1998

In this paper we describe a real time signal processing technique for the code correletion short range measurement sensor. Code correlation values are acquired via simple RC charging circuits within several tens of microsecond. Because the range measuring process is very fast and simple, the proposed technique is applicable to common near range targets as well as fast moving targets in real time. Some experimental results show the validity and usefulness of the proposed method.

• 한국컴퓨터정보학회논문지
• /
• 제21권11호
• /
• pp.1-7
• /
• 2016

In this paper, we proposed real-time relative radiometric calibration processing method for SWIR(Short Wavelength Infra-Red) sensor using 'Hyper-Spectral Imager'. Until now domestic research for Hyper-Spectral Imager has been performing with foreign sensor device. So we have been studying hyper spectral sensor device to meet domestic requirement, especially military purpose. To improve detection & identify capability in 'Hyper-Spectral Imager', it is necessary to expend sensing wavelength from visual and NIR(Near Infra-Red) to SWIR. We aimed to design real-time processor for SWIR sensor which can control the sensor ROIC(Read-Out IC) and process calibrate the image. To build Hyper-Spectral sensor device, we will review the SWIR sensor and its signal processing board. And we will analyze relative radiometric calibration processing method and result. We will explain several SWIR sensors, our target sensor and its control method, steps for acquisition of reference images and processing result.

• Near Infrared Analysis
• /
• 제1권2호
• /
• pp.29-33
• /
• 2000

The identification step of raw drug materials is an indispensible procedure in the GMP manufacturing process within the pharmaceutical industry. However, wet chemistry methods for identification of drug materials, used by the various Pharmacopeia are time-consuming and expensive steps. In this paper, near-infrared spectroscopy (NIRS) has been developed for identifying eleven drug substances including calcium pantothenate, cefaclor, cefoperazone, cephradine, dextromethorphan, ehtambutol, nicotinamide, pyrozinamide, tramadol, vitamin C, and vitamin E. Also the aim of ths work is to consturct a new algorithm for calibration model using soft independence modeling of class analogy (SIMCA) with Malinowskis Indicator Function (IND), which is used for finding the number of principal components of each class of the SIMACA model. The use of NIR technique with pattern recognition to qualify raw materials can make it possible to monitor process in real time as well as to control all procedures in the pharmaceutical industry. As the result, the samples identified of 183 different batches from 11 different compounds were separated clearly by SIMCA with 2nd derivative spectra in the NIR region of 1100∼2400 nm.

• 대한원격탐사학회지
• /
• 제27권3호
• /
• pp.259-276
• /
• 2011

Short-term land cover changes, such as forest fire scar and crop harvesting, can be detected by high temporal resolution satellite imagery like MODIS and AVHRR. Because these optical satellite images are often obscured by clouds, the static cloud-free composite methods (maximum NDVI, minblue, minVZA, etc.) has been used based on non-overlapping composite period (8-day, 16-day, or a month). Due to relatively long time lag between successive images, these methods are not suitable for observing short-term land cover changes in near-real time. In this study, we suggested a new dynamic cloud-free composite algorithm that uses cut-and-patch method of cloud-masked daily MODIS data using MOD35 products. Because this dynamic composite algorithm generates daily cloud-free MODIS images with the most recent information, it can be used to monitor short-term land cover changes in near-real time. The dynamic composite algorithm also provides information on the date of each pixel used in compositing, thereby makes accurately identify the date of short-term event.

• Agricultural and Biosystems Engineering
• /
• 제7권1호
• /
• pp.18-26
• /
• 2006

In-field site-specific nitrogen (N) management increases crop yield, reduces N application to minimize the risk of nitrate contamination of ground water, and thus reduces farming cost. Real-time N sensing and fertilization is required for efficient N management. An 'on-the-go' site-specific N management system was developed and evaluated for the supplemental N application to com (Zea mays L.). This real-time N sensing and fertilization system monitored and assessed N fertilization needs using a vision-based spectral sensor and controlled the appropriate variable N rate according to N deficiency level estimated from spectral signature of crop canopies. Sensor inputs included ambient illumination, camera parameters, and image histogram of three spectral regions (red, green, and near-infrared). The real-time sensor-based supplemental N treatment improved crop N status and increased yield over most plots. The largest yield increase was achieved in plots with low initial N treatment combined with supplemental variable-rate application. Yield data for plots where N was applied the latest in the season resulted in a reduced impact on supplemental N. For plots with no supplemental N application, yield increased gradually with initial N treatment, but any N application more than 101 kg/ha had minimal impact on yield.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.756-760
• /
• 2005

By development of a robot technology, personal robot is being developed very actively. Various infra-technologies are accumulated in hardware and software how by internal a lot of research and development efforts, and it is circumstance that actual commodity is announced. But, personal robot is applied to be acting near human, and takes charge of safety and connected directly a lot of works of home security, gas-leakage, fire-warning facilities, or/and etc. So personal robot must do safe and stable action even if any unexpected accidents are happened, important functions are always operated. In this paper, we are wished to show design structures for supporting fault-tolerant operation from our real-time robot middleware viewpoint. Personal robot, in being developed, was designed by module structure to do to interconnect and to interoperate among each module that is mutually implemented by each research facilities or company. Also, each modules can use appreciate network system that is fit for handling and communicating its data. To guarantee this, we have being developed a real-time network middleware, for especially personal robot. Recent our working is to add and to adjust some functions like connection management, distributed routing mechanism, remote object management, and making platform independent robot application execution environment with self-moving of robot application, for fault-tolerant personal robot.

• 한국인터넷방송통신학회논문지
• /
• 제17권4호
• /
• pp.219-224
• /
• 2017

경제급전 최적화 문제를 해결하는 결정론적인 알고리즘에 존재하지 않아 지금까지는 비결정론적인 휴리스틱 알고리즘들이 제안되고 있다. 이와 더불어 실시간 급전문제에 대한 연구는 거의 없는 실정이다. 본 논문은 발전정지 개념을 도입하여 실시간 급전의 최적화 문제를 풀 수 있는 알고리즘을 제안하였다. 제안된 알고리즘은 단위 발전량당 최대 비용이 소요되는 발전기는 발전을 중지시키는 기준을 적용하였다. 본 논문에서 제안한 발전정지 기준은 발전비용함수에서 밸브효과에 따른 비선형 절대치 함수를 제외한 2차 함수만을 대상으로 하였다. 경제급전 문제의 시험사례로 빈번히 활용되고 있는 데이터에 대해 제안된 알고리즘을 적용한 결과 기존 알고리즘들의 해를 크게 감소시킬 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제19권11호
• /
• pp.1055-1060
• /
• 2006

High temperature superconducting(HTS) power cable is expected to be used for power transmission lines supplying electric power for densely populated cities in the near future. Since HTS power cable is capable of the high current density delivery with low power loss, the cable size can be compact comparing with the conventional cable whose capacity is same. In this paper, the authors propose the real time simulation method which puts a teal HTS wire into the simulated 22.9 kV utility grid system using Real Time Digital Simulator (RTDS). For the simulation analysis, test sample of HTS wire was actually manufactured. And the transient phenomenon of the HTS wire was analyzed in the simulated utility power grid. This simulation method is the world first trial in order to obtain much better data for installation of HTS power device into utility network.