• Earthquakes and Structures
• /
• v.20 no.1
• /
• pp.87-96
• /
• 2021

Ground motions recorded in near-fault sites, where the rupture propagates toward the site, are significantly different from those observed in far-fault regions. In this research, finite element modeling is used to investigate the effect of pile cap stiffness on the seismic response of soil-pile-structure systems under near-fault ground motions. The Von Wolffersdorff hypoplastic model with the intergranular strain concept is applied for modeling of granular soil (sand) and the behavior of structure is considered to be non-linear. Eight fault-normal near-field ground motion records, recorded on rock, are applied to the model. The numerical method developed is verified by comparing the results with an experimental test (shaking table test) for a soil-pile-structure system. The results, obtained from finite element modeling under near-fault ground motions, show that when the value of cap stiffness increases, the drift ratio of the structure decreases, whereas the pile relative displacement increases. Also, the residual deformations in the piles are due to the non-linear behavior of soil around the piles.

• Wind and Structures
• /
• v.34 no.1
• /
• pp.101-113
• /
• 2022

We experimentally investigate the high-Reynolds flow around a rectangular cylinder of aspect ratio 5:1. This configuration is the object of the international BARC benchmark. Wind tunnel tests have been carried out for the flow at zero angle of attack and a Reynolds number, based on the crossflow cylinder length and on the freestream velocity, equal, to 40 000. Velocity measurements are obtained by using hot-wire anemometry along 50 different cross-flow traverses on the cylinder side and in the near wake. Differential pressure measurements are acquired on multiple streamwise sections of the model. The obtained measurements are in a good agreement with the state-of-the-art experiments. For the first time among the several contributions to the BARC benchmark, detailed flow measurements are acquired in the region near the cylinder side and in the near-wake flow. The edges and the thickness of the shear layers detaching from the upstream edges are derived from velocity measurements. Furthermore, we compute the flow frequencies characterizing the roll-up of the shear layers, the evolution of vortical structures near the cylinder side and the vortex shedding in the wake.

• Steel and Composite Structures
• /
• v.41 no.5
• /
• pp.713-730
• /
• 2021

The seismic performance of rigid steel frames is widely investigated, but that of semi-rigid (SR) steel frames are not studied extensively, especially for near-field earthquakes. In this paper, the performances of five and ten-story steel SR frames having different degrees of semi-rigidity are evaluated at four performance points in the four different deformation states, namely, the elastic, elasto-plastic, plastic, and near collapse states. The performances of the SR frames are measured by the response parameters including the maximum values of the top floor displacement, base shear, inter-story drift ratio, number of plastic hinges, and SRSS of plastic hinge rotations. These response parameters are obtained by the capacity spectrum method (CSM) using pushover analysis. The validity of the response parameters determined by the CSM is evaluated by the results of the nonlinear time history analysis (NLTHA) for both near and far-field earthquakes at different PGA levels, which are consistent with the performance points. Results of the study show that the plastic hinges of SR frame significantly increase in the range of plastic to near-collapse states for both near and far-field earthquakes. The effect of the degree of semi-rigidity is pronounced only at higher degrees of semi-rigidity. The predictions of the CSM are fairly well in comparison to the NLTHA.

• Journal of Advanced Navigation Technology
• /
• v.27 no.5
• /
• pp.546-551
• /
• 2023

In this study, a beam steering measurement system was developed to perform functions such as far-field beam steering and near-field beam focusing for TX/RX modes in the near file of the AESA radar. The beam steering measurement system consists of a spherical near-field scanner, an antenna positioner, a near-field controller, a network analyzer, a radar control system, a verification radar, a simulated radio, and an AESA radar. Using the developed system, the characteristics of TX/RX patterns before and after installation of radome to AESA radar were measured, and the beam pattern was analyzed through conversion to far field-after near-field measurement.The boresight error of the radar antenna device was measured, and it was confirmed that the main lobes were formed the same before and after the simulated radar dome was mounted.

• Fisheries and Aquatic Sciences
• /
• v.27 no.5
• /
• pp.276-282
• /
• 2024

The present study was conducted to investigate the behavior and distribution characteristics of fishes near an artificial reef close to the waters of Uljin marine ranch. A 200-kHz, dual-beam frequency transducer was attached to the side of a ship for acoustic measurements. The fish formed small groups in the bottom layer near the artificial reef around the afternoon-sunset period; at night, the fish did not form groups and remained individually scattered. During dawn-sunrise and morning, the fish formed groups again and were found near the upper and middle layers of the artificial reef. High density of fish occurred near the middle of the nautical zone during morning, afternoon-sunset, and dawn-sunrise, periods; at nighttime, the distribution was uniform across the entire zone. Moreover, the mean Nautical Area Scattering Coefficients (NASC, m²/nmi²) value was highest during dawn-sunrise at 400.2 m²/nmi², similar during night and morning (100.5 m²/nmi²), and lowest during afternoon-sunset (20.1 m²/nmi²). The present study is expected to provide the background for understanding the behavioral characteristics of fish living near artificial reefs and estimating the density and biomass of fish.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.138-144
• /
• 2010

Purpose: Despite the rapidly changing healthcare environment, healthcare organizations have recognized the importance of patient safety management. But patient safety management has the problem of the lack of participation of members due to the process of focusing on the follow-up service and punishment. The department of nuclear medicine in Uijeongbu St. Mary's Hospital started this research to reduce the near miss and prevent patient safety accidents by both initiating the participatory near-miss-proof activities as an advance management and constructing a system without disadvantages of reporting. In addition, this research aims to establish a differentiated patient safety management system in the department of nuclear medicine. Materials and Methods: 1. Colleting cases of team members' past and present near miss and accidents(First data collection). 2. Quantifying the cases of near miss and accidents after identifying the degree of importance and urgency through surveys(Second data collection). 3. Quantifying cases and indentifying important points of contact through data analysis. 4. Making and standardizing a manual for important points of contact, and initiating participatory activities to prevent errors. 5. Activating web-based community for establishing the report system of near miss. 6. Estimating the result of before and after activities through surveys and focus group interviews. Results: 1) Quantified safety accidents and near miss in the department of nuclear medicine. About 50 near misses a month and one safety accident a year. 2) Establishing improvement measurements based on quantified data. About 11 participatory activities, the improvement of process, a manual for standardization. 3) Creating a system of safety culture and high participation rate of team members. Constructing a report system, making a check list and a slogan for safety culture, and establishing assessment index. 4) Activating communities for sharing the information of cases of near misses and accidents. 5) As the result of activities, the rate of near miss occurrence declined by 50% and the safety accident did not happen. Conclusion: The best service in the department of nuclear medicine is to provide patients with safety-guaranteed high-quality examination and cure. This research started from the question, 'what is the most faithful-to-the-basics way to provide the best service for patients?' and team members' common answer for this question was building a system with participation of all members. Building a system through the participatory improvement activities for preventing near miss and creating safety culture resulted in the 50% decline of near miss occurrence and no accident. This is a meaningful result from the perspective of advance management for patient safety. Moreover, this research paved the way for creating a culture to report and admit near miss or accidents by establishing a report system with no disadvantage of reporting. The system which sticks to the basics is the best service for patients and will form a patient safety culture system, which will lead to the customer satisfaction. Therefore, all members of the department of nuclear medicine will develop a differentiated patient safety culture with stabilizing the established system.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.1
• /
• pp.67-73
• /
• 2015

Purpose: This study was investigated the relationship between the male and female of near stereoacuity and phoria, and was examined the correlations between near stereoacuity and phoria and refractive error. Methods: Adult 83 (male 36, female 47, mean age $21.09{\pm}1.74$(19~29) years old) target was examined after full correction of refractive error. Near stereoacuity was measured by using Titmus-fly Stereotest(Stereo Optical Co., Inc., Chicago, IL, USA), and RANDOT Stereotest (Stereo Optical Co., Inc., Chicago, IL, USA), phoria was measured by using modified torrington method, at distance 40 cm. Results: In near stereoacuity, male was better good than female, and there was no difference between male and female (p>0.05). In near phoria, female was more higher than male, and there was a significant difference between male and female (p<0.05). Near stereoacuity by Titmus-fly test and Randot test result respectively was $262.17{\pm}562.43$ sec (second of arc) $243.08{\pm}68.04$ sec in esophoria, $148.42{\pm}269.54$ sec, $107.40{\pm}263.74$ sec in orthophoria, $113.94{\pm}152.46$ sec, $79.70{\pm}136.83$ sec in exophoria, there was a no difference between three phoria groups (p>0.05), and was a high correlation between phoria and near stereoacity(r=0.68). In addition, near stereoacuity in the refractive error respectively was $80.00{\pm}571.43$ sec, $68.75{\pm}36.82$ sec in myopia, $133.57{\pm}224.15$ sec, $93.14{\pm}214.95$ sec in hyperopia, $511.20{\pm}855.00$ sec, $511.4{\pm}855.60$ sec, there was a significant difference between three phoria groups (p<0.05). when was classfiied near stersoacuity into degree of refractive error, near stersoacuity was best in emmetropia, and was reduced when refractive error was highest in high degree myopia, and hyperopia. Conclusions: Titmus-fly Stereotest and RANDOT Stereotest result, near stereoacuity of adults, when esophoria and high degree refractive error, was reduced, there was a relationship between near stereoacuity with phoria, and refractive error. In this both stereotests if was bad when near stereoacuity can expect a phoria and refractive error.

• Journal of Korean Clinical Health Science
• /
• v.3 no.4
• /
• pp.435-443
• /
• 2015

Purpose. This study was to investigate comparison of the near eye position according to the spectacle and contact lens wearing. Methods. We measured the AC/A ratio and near horizontal phoria using modified Thorington method in each case spectacle and contact lens wearing of equivalent spherical power after measuring the full corrected diopter for 20 subjects (men 5, woman 15, $21.15{\pm}1.35$ years) without specific ocular diseases, ocular surgery experience and vision anomalies. Results. It was shown high correlation between spectacle and contact lens wearing as AC/A ratio is a correlation coefficient 0.99 (p=0.00), near horizontal phoria is a correlation coefficient 0.95 (p=0.00). And contact lens wearing increased as AC/A ratio by $0.32{\pm}1.35$ ${\Delta}/D$ (p=0.31) and near horizontal phoria by $-0.17{\pm}2.18$ ${\Delta}$ (p=0.73) than spectacle wearing but there was no statistically significant difference. As the higher myopic grade AC/A ratio increased and then was shown decreased tendency in -6.00 D < $SED{\leq}-4.00$ D group (p>0.05) and as the higher myopic grade near exophoria increased but there was no statistically significant difference (p>0.05). Conclusions. We should consider that the subjects who had the lower AC/A ratio or higher near exophoria in -6.00 D < $SED{\leq}-4.00$ D group were necessary to measure AC/A ratio and near horizontal phoria when they were wearing contact lens because contact lens wearing tended to increase the near exophoria than spectacle wearing.

• Journal of the Korea Convergence Society
• /
• v.12 no.12
• /
• pp.287-294
• /
• 2021

A near miss is an unplanned event that did not result in injury/illness, or property damage, but had potentials to do so. The importance of the near miss has been emphasized by many researchers and organizations. However, only a few studies have quantitatively approached the near miss from the viewpoint of safety culture. The purpose of this study is to investigate the current status of near miss reporting activities in manufacturing workplaces in Korea. It also aims to understand how the activities related with the safety culture and the occurrence of industrial accidents. To this end, a survey was conducted on manufacturing workplaces and the results were analyzed. As a result, there was a marked difference in the perception on near miss according to whether or not the near miss reporting activity was conducted. However, it was found that only 56% of the workplaces were carrying out the reporting activities. It was found that the number of near misses reported varied depending on the reward. Although no correlation could be found between whether or not the near miss reporting activities were carried out and the history of industrial accidents occurred, it was found that safety culture level was hier at the workplaces conducting the activities.

• Journal of the Society of Disaster Information
• /
• v.19 no.1
• /
• pp.216-230
• /
• 2023

Purpose: The purpose is to prevent accidents by predicting disasters through the analysis of near-miss. Method: In this study, a near-miss literature review and data were collected at construction sites, and a questionnaire survey was conducted to use logistic regression analysis and decision tree analysis to classify the possibility of near-miss connection. Result: As a result of analyzing the effects of near-miss types on mental, physical, and safety habits and behaviors, the factor with a high influence on the body is the need for near-miss management, the type of job is electricity·information communication, and health status in order, and the mental factor is the construction scale The influence was high, and the factors with the highest influence on the habit behavior factors were analyzed in the order of experience, number of serious injuries, and occupation in order of illusion, inappropriate work instructions, and body parts. Through decision tree analysis, factors and patterns that affect the possibility of a near-miss being a surprise accident were identified. Conclusion: Construction site officials consider the observation of near-miss and mentally and physically. Specific management of the relevance of physical aspects to near-miss should be implemented, and a work environment in which serious accidents are reduced is expected through personnel allocation, work plans, work procedures and methods, and feedback so that inappropriate work instructions do not lead to near-miss.