• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.635-640
• /
• 1998

Thermal fluid mixing behavior during a postulated medium-size hot leg break loss of coolant accident is analyzed for the international comparative assessment study on pressurized thermal shock (PTS-ICAS) proposed by OECD-NEA. The applicability of RELAP5 code to analyze thermal fluid mixing behavior is evaluated through a simple modeling relevant to the problem constraints. Based on the calculation result, the onset of Thermal stratification is investigated using Theofanous's empirical correlation. Sensitivity calculations using a fine node model and crossflow model are also performed to evaluate the modeling capability on multi-dimensional characteristics related to thermal fluid mixing.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.818-823
• /
• 1998

Three Mile Island Unit-2 (TMI-2)의 사고 후 OECD-NEA 주관의 연구에 의하면 압력용기 하부의 노즐이 국부열점(hot spot) 영역의 경우 거의 압력용기 바닥까지 용융되었음이 조사되었다. [1]. 이러한 재배치된 용융노심의 열속에 의하여 압력용기의 외부와 통하는 penetration tube weld(노즐 용접부)가 파손된다면 내부의 고압상태로 인해 penetration tube ejection 사고 및 이에 따르는 용융노심의 압력용기 외부로의 유출 가능성까지 배제할 수 없을 것이다. 본 연구의 출발점은 중대사고시 이러한 압력 및 열속에 따르는 노즐 용접부의 파손확률을 결정하는데 있다. 크리프 파출시 기존의 해석에서 쓰인 deterministic approach를 개선하여 probabilistic approach를 개발하였다. 또한 기존의 해석에서 쓰인 단순한 안전 여유도(margin-to-failure)의 개념과 비교하여 용접부에서의 파손확률을 계산하였다.

• Nuclear industry
• /
• v.36 no.4
• /
• pp.33-45
• /
• 2016

'기후 변화 대응을 위한 탈탄소 에너지로의 접근'을 주제로 한 해외 원자력 전문가 좌담회가 4월 20일 부산 BEXCO 컨벤션홀에서 열렸다. 한국원자력문화재단이 주최한 이번 좌담회는 당일 열린 '2016 한국원자력연차대회'에 참석한 해외 원자력 전문가를 초청하여 마련된 것으로, 민계홍 한국원자력산업회의 상근부회장(좌장 사회), 김호성 한국원자력문화재단 이사장, Geoffrey Rothwell OECD/NEA 수석경제연구원, Tomas $K{\aa}berger$ 스웨덴 Chalmers 공대 에너지정책학과 교수, Rashid Sarkar 방글라데시 공대 기계공학부 교수(원자력위원회 위원장 내정자) 등 원자력 전문가들이 참석하여 2시간에 걸쳐 의견을 나누었다. 좌담회 전문을 게재한다.

• Journal of Navigation and Port Research
• /
• v.29 no.2
• /
• pp.127-134
• /
• 2005

The purpose of this study is to explore the concept of a logistics hub, identify key factors and milestones for its development, and give some recommendations and implications to developing countries. For this the countries competing to be Logistics hub in Northeast Asia (NEA), such as South Korea, japan and China, are taken into consideration These countries have under its priority policies the development of a logistics hub vision to become the central area of the region achieving microeconomic and macroeconomic prosperity. Based on the review of the relevant literature, five factors came up as key determinants for the development of a hub project: 1. Logistics services support and infrastructure. 2. Business environment. 3. Economic determinants. 4. Political support and 5. Access to international markets. These are going to be analyzed together with its different variables, using statistical methods.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.38-40
• /
• 2003

This paper describes the integrated dynamic stability(IDS) program for tuning the power system controllers, such as PSS, AVR and so on. IDS consists of three modules; power flow module, PWRLF, to calculate large scale power system load flow solutions, IDS/PSS module to calculate eigenvalues and frequency response in the range of frequency from 0.2Hz to 2Hz, and IDS/NEA module to calculate eigenvalues in the range of frequency from 5.0Hz to 55Hz. In addition, IDS provides graphic user interface(GUI) in order to let the user handle and analyze the input data and the results of calculation with convenience.

• East Asian Economic Review
• /
• v.16 no.4
• /
• pp.395-410
• /
• 2012

For historical and political reasons, South Korea (hereafter Korea), Japan and China have not achieved much progress in regional energy cooperation for decades. However, the rising importance of Northeast Asia (NEA) in the world energy sphere, especially in the global oil market, is providing an opportunity to create an integrated oil market in the region. This study suggests the Northeast Asian Energy Corridor (NEAEC) Initiative as an effective conduit for raising the possibility of the Northeast Asian oil hub project. The NEAEC Initiative combines the model of Europe's Amsterdam-Rotterdam-Antwerp (ARA) with Singapore's AsiaClear as a form of financial collaboration. The study suggests that an electronically integrated Over-the-Counter (OTC) market clearing mechanism accompanied by other key financial instruments among Korea, Japan and China can be an effective means for promoting financial collaboration in the region.

• Nuclear Engineering and Technology
• /
• v.50 no.6
• /
• pp.981-988
• /
• 2018

An experiment was performed for the OECD/NEA ROSA-2 Project with the large-scale test facility (LSTF), which simulated a steam generator tube rupture (SGTR) accident due to a double-ended guillotine break of one of steam generator (SG) U-tubes with operator recovery actions in a pressurized water reactor. The relief valve of broken SG opened three times after the start of intact SG secondary-side depressurization as the recovery action. Multi-dimensional phenomena specific to the SGTR accident appeared such as significant thermal stratification in a cold leg in broken loop especially during the operation of high-pressure injection (HPI) system. The RELAP5/MOD3.3 code overpredicted the broken SG secondary-side pressure after the start of the intact SG secondary-side depressurization, and failed to calculate the cold leg fluid temperature in broken loop. The combination of the number of the ruptured SG tubes and the HPI system operation difference was found to significantly affect the primary and SG secondary-side pressures through sensitivity analyses with the RELAP5 code.

• Nuclear Engineering and Technology
• /
• v.42 no.4
• /
• pp.365-376
• /
• 2010

This paper summarizes the results of a Writing Group on the Extension of CFD codes to two-phase flow safety problems, which was created by the Group for Analysis and Management of Accidents of the Nuclear Energy Agency' Committee on the Safety of Nuclear Installations (NEA-CSNI). Two-phase CFD used for safety investigations may predict small scale flow processes, which are not seen by system thermalhydraulic codes. However, the two-phase CFD models are not as mature as those in the single phase CFD and potential users need some guidance for proper application. In this paper, a classification of various modelling approaches is proposed. Then, a general multi-step methodology for using two-phase-CFD is explained, including a preliminary identification of flow processes, a model selection, and a verification and validation process. A list of 26 nuclear reactor safety issues that could benefit from investigations at the CFD scale is identified. Then, a few issues are analyzed in more detail, and a preliminary state-of-the-art is proposed and the remaining gaps in the existing approaches are identified. Finally, guidelines for users are proposed.

• Nuclear Engineering and Technology
• /
• v.49 no.5
• /
• pp.920-927
• /
• 2017

With ever-advancing computer technology, the Monte Carlo (MC) neutron transport calculation is expanding its application area to nuclear reactor transient analysis. Dynamic MC (DMC) neutron tracking for transient analysis requires efficient algorithms for delayed neutron generation, neutron population control, and initial condition modeling. In this paper, a new MC steady-state simulation method based on time-dependent MC neutron tracking is proposed for steady-state initial condition modeling; during this process, prompt neutron sources and delayed neutron precursors for the DMC transient simulation can easily be sampled. The DMC method, including the proposed time-dependent DMC steady-state simulation method, has been implemented in McCARD and applied for two-dimensional core kinetics problems in the time-dependent neutron transport benchmark C5G7-TD. The McCARD DMC calculation results show good agreement with results of a deterministic transport analysis code, nTRACER.

• Textile Coloration and Finishing
• /
• v.32 no.4
• /
• pp.226-231
• /
• 2020

This study investigated effect of particle sizes of polymer binders for digital textile printing(DTP) pigment inks on touch of fabrics. The polymer binders were synthesized via miniemulsion polymerization of methyl methacrylate(MMA), butyl acrylate(BA), N-ethylolacrylamide(NEA) and methacrylic acid(MAA). The prepared binders were applied to black pigment inks and those black pigment inks were used to dye cotton fabrics. Then, color strength, rubbing fastness, stiffness, surface and bending properties of the dyed fabrics were investigated. Depending on the particle size of the polymer binder used, color strength, friction fastness, stiffness, surface and bending properties change. Generally, the larger the particle size of the polymer binder, the softer properties.