• 방사성폐기물학회지
• /
• 제19권3호
• /
• pp.353-366
• /
• 2021

The solubilities of different multicomponent lanthanide oxide (Ln₂O₃) solid solutions including binary (Ln₁ and Ln₂ = La, Nd, Eu, or Tm), ternary (Ln₁, Ln₂, and Ln₃ = La, Nd, Eu, or Tm), and higher systems (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu) were studied after aging for four weeks at 60℃. Our recent study revealed that the phase transformations in binary ((La, Nd) and (La, Eu)) and ternary (La, Nd, Eu) systems are responsible for the formation of (La, Nd)(OH)₃, (La, Eu)(OH)₃, and (La, Nd, Eu)(OH)₃ solid solutions, respectively. The variations in the mole fractions of La³⁺, Nd³⁺, and Eu³⁺ in the sample solutions of these hydroxide solid solutions indicated that a thermodynamic equilibrium might account for the apparent La, Nd, and Eu solubilities. Conversely, the binary and ternary systems containing Tm₂O₃ as the heavy lanthanide oxide retained the oxide-based solid solutions, and their solubility behaviors were dominated by their congruent dissolutions. In the higher multicomponent system, the X-ray diffraction patterns of the solid phases, before and after contact with the aqueous phase indicated the formation of a stable oxide solid solution and their solubility behavior was explained by its congruent dissolution.

• Progress in Superconductivity
• /
• 제10권2호
• /
• pp.128-132
• /
• 2009

Polycrystalline samples of $(Ru_{0.8}Nb_{0.2})Sr_2(Gd_{1.5-x}Nd_xCe_{0.5})Cu_2O_z$($ 0{\leq}x{\leq}1.25$) have been synthesized by a solid-state reaction route. The X-ray diffraction data revealed that the Nd solubility limit can be placed between x=0.5 and x=0.75. The superconducting transition temperature decreased with increasing Nd content, confirming that Nd entered the lattice. Room-temperature thermoelectric power measurements showed that all the samples are in the underdoped state and the partial substitution of Nd for Gd resulted in a decrease in the carrier density on the superconducting layers.

• 방사성폐기물학회지
• /
• 제11권1호
• /
• pp.1-9
• /
• 2013

파이로그린공정의 염폐기물처리과정에서 발생되는 주요 산화물 형태의 폐기물에는 희토류폐기물이 있으며 주요 구성 핵종은 Y, La, Ce, Pr, Nd, Sm, Eu, Gd 등 8종이다. 최종적인 희토류폐기물의 형태는 산화물 형태로 발생된다. 본 연구에서는 붕규산 유리계 내에서 희토류 산화물의 유리화 타당성을 평가 하기 위하여 6종의 유리조성을 개발하였다. 희토류 8핵종 혼합에 대한 solubility는 $1,200^{\circ}C$에서 25wt% 미만, $1,300^{\circ}C$에서 30wt% 미만 waste loading으로 온도 상승에 따라 증가하는 것으로 나타났으며 liquidus temperature는 균질한 유리가 형성된 20wt% waste loading에서 $950^{\circ}C$ 이하로 평가되었다. 희토류 산화물의 유리매질 내 solubility 이상에서는 희토류-oxide-silicate 결정이 생성된 유리세라믹을 이차상으로 형성하였으며 20~25wt% waste loading의 표면균질성이 양호한 유리는 용융온도 $1,200{\sim}1,300^{\circ}C$ 범위에서 점도 100 poise 이하, 전기전도도 1 S/cm 이상으로 유도가열식 저온용융로설비에서의 운전 용이성이 매우 양호한 것으로 평가되었다. 개발된 유리조성에 대한 기타 물리 화학적 특성 평가를 위한 실험들이 향후 수행될 예정이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.624-627
• /
• 2001

Two kinds of Nd$_{1+x}$Ba$_{2-x}$Cu$_3$O$_{7-{\delta}}$, the sintering samples and zone melting samples, were heat treated under pure Ar at 95$0^{\circ}C$. The substitution of Nd ion for Ba ion in the Nd$_{1+x}$Ba$_{2-x}$Cu$_3$O$_{7-{\delta}}$ before and after the heat treatment were investigated by XRD. In order to know the effects of the heat treatment, the T$_{c}$ and J$_{c}$ of samples with the heat treatment and those without the heat treatment by Ar were comparatively studied. The results show that the substitution of Nd for Ba decreased, T$_{c}$, and J$_{c}$ increased after the treatment under Ar at 95$0^{\circ}C$. The Nd$_{1+x}$Ba$_{2-x}$Cu$_3$O$_{7-{\delta}}$ samples were oxygenated under pure oxygen at 30$0^{\circ}C$. From the XRD pattern it was found that the sample with x< 0.4 could transfer from tetragonal phase to orthorhombic phase after the oxygenation, but the sample with x>0.4 could not make the phase transition even after a long time oxygenation.ion even after a long time oxygenation.ation.n.ation.ation.

• 한국분말재료학회지
• /
• 제23권6호
• /
• pp.432-436
• /
• 2016

We investigate the microstructural and magnetic property changes of $DyH_2$, $Cu+DyH_2$, and $Al+DyH_2$ diffusion-treated NdFeB sintered magnets with the post annealing (PA) temperature. The coercivity of all the diffusion-treated magnets increases with increasing heat treatment temperature except at $910^{\circ}C$, where it decreases slightly. Moreover, at $880^{\circ}C$, the coercivity increases by 3.8 kOe in Cu and 4.7 kOe in Al-mixed $DyH_2$-coated magnets, whereas this increase is relatively low (3.0 kOe) in the magnet coated with only $DyH_2$. Both Cu and Al have an almost similar effect on the coercivity improvement, particularly over the heat treatment temperature range of $790-880^{\circ}C$. The diffusivity and diffusion depth of Dy increases in those magnets that are treated with Cu or Al-mixed $DyH_2$, mainly because of the comparatively easy diffusion path provided by Cu and Al owing to their solubility in the Nd-rich grain boundary phase. The formation of a highly anisotropic $(Nd,\;Dy)_2Fe_{14}B$ phase layer, which acts as the shell in the core-shell-type structure so as to prevent the reverse domain movement, is the cause of enhanced coercivity of diffusion-treated Nd-Fe-B magnets.

• 대한소아치과학회지
• /
• 제23권3호
• /
• pp.640-658
• /
• 1996

The purpose of this study was to examine the mechanism of improving acid resistance of Nd-YAG laser irradiated tooth enamel and determine the most effective energy density for improving acid resistance. The bovine tooth enamel were lased with a pulsed Nd-YAG laser. The energy densities of exposed laser beam were varied from 10 to $70\;J/cm^2$. To investigate the degree of improving acid resistance by irradiation, all the samples were submerged to demineralize in 0.5 N $HClO_4$ solution for 1 minute. After 1 minute, 0.05 % $LaCl_3$ was added to the solution for interrupting the demineralization reaction. The amounts of dissolved calcium and phosphate in the solution were measured by using an atomic absorption spectrophotometer and the UV/VIS spectrophotometer, respectively. To examine the mechanism of improving acid resistance, X-ray diffraction analysis, infrared spectroscopy, and scanning electron microscopy were taken. The X-ray diffraction pattern of the samples were obtained in the $10^{\circ}{\sim}80^{\circ}2{\theta}$ range with $Cu-K{\alpha}$ radiation using M18HF(Mac Science Co.) with X-ray diffractometer operating at 40 KV and 300 mA. The infra-red spectra of the ground samples in 300 mg KBr pellets 10 mm diameter were obtained in the $4000cm^{-1}\;to\;400cm^{-1}$ range using JASCO 300E spectrophotometer. The scanning electron microscopy was carried out using JSM6400(JEOL Co.) with $500{\sim}2000$ times magnification. The results were as follow 1. The concentration of calcium dissolved from laser irradiated enamel with $50J/cm^2$ was significantly lesser than that of unlased control group (p<0.05) 2. From the result of the X-ray diffraction analysis, $\beta$-TCP, which increases acid solubility, was identified in lased enamel but the diffraction peaks of (002) and (004) became sharp with increasing energy density of laser irradiation. This means that the crystals in lased samples were grown through the c-axis and subsequently, the acid solubility of enamel decreased. 3. The a-axis parameter was slightly increased by laser irradiation, whereas the c-axis parameter was almost constant except for a little decrease at $50J/cm^2$. 4. In the infra-red spectra of lased enamels, phosphate bands ($600{\sim}500cm^{-1}$), B-carbonate bands (870, $1415{\sim}1455cm^{-1}$), and A-carbonate band ($1545cm^{-1}$) were observed. The amounts of phosphate bands and the B-carbonate bands were reduced, on the other hand, the amount of the A-carbonate band was increased by increase the energy density. 5. The SEM experiments reveal that the surface melting and recrystallization were appeared at $30J/cm^2$ and the cracks were observed at $70J/cm^2$. From above results, It may be suggested that the most effective energy density for improving acid resistance of tooth enamel with the irradiation of Nd-YAG laser was $50J/cm^2$. The mechanism of improving acid resistance were reduction of permeability due to surface melting and recrystallization of lased enamel and reduction of acid solubility of enamel due to decrease of carbonate content and growth of crystal.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.913-916
• /
• 2001

From 1994 the cooperation between NEU of China and MJU of South Korea for study of ReBaCuO (Re=Rare earth elements) superconductors has been carried out. The progress has been got in following projects. Critical current density ($J_c$) of YBaCuO superconductor prepared by Melting Textured Growth (MTG) was improved. In the preparation of textured YBaCuO, 20 wt.% of YBaCuO 211 phase was added, which would be climactic for the microcracks in the textured YBaCuO. The effects of the 211 phase and Ag content on the superconductivity were studied and discussed in detail. The improved $J_c$ value was reached to 8$\times$10^4 A/cm^2 (77K,0T). Single phase $YbBa_{2}Cu_{3}O_{x}$ superconductor was sintered by the traditional powder metallurgical method, and its reaction process was studied. In recent years, NdBaCuO superconductor is being performed. The behavior of $Nd_{4}Ba_{2}Cu_{2}O_{10}$(Nd422 phase) and the solid solubility, x in the superconductor $Nd_{1+x}Ba_{2-x}Cu_{3}O_{y}$ by the heat treatment in the low oxygen partial pressure (1%) or Ar at $950{\circ}C$ were investigated. The zone-melting process was used to make oriented NdBaCuO superconductor in order to increase the critical current density.

• KSBB Journal
• /
• 제16권3호
• /
• pp.259-263
• /
• 2001

The development of hollow fiber reactor system for the production of chiral 1,2-epoxy-7-octence by epoxide hydrolase for Rhodotorula glutinis was investigated. Dodecane with high solubility of the racemic substrate passed through the lumen side of the hollow fiber reactor and cell suspension was recirculated through the shell side. The 2nd hollow fiber reactor was coupled to the production reactor to extract the diol byproduct which was the inhibitor of epoxide hydrolase. Optically pure (S)-1,2-epoxy-7-octene (0.6 M in dodecane) could be obtained using hollow-fiber reactor system.

• 대한소아치과학회지
• /
• 제26권2호
• /
• pp.377-398
• /
• 1999

불소도포시 주로 형성되는 calcium fluoride는 구강내 환경에서 pH에 의해 조절되는 불소의 저장고 역할을 하여 치아우식 예방에 있어서 중요한 역할을 하는 것으로 알려져 있다. 따라서 불소도포의 우식예방 효과는 calcium fluoride를 얼마나 많이 형성시켜 오래 지속시키는 가에 달려 있다. 이에 치아 내산성 증가에 효과 있다고 알려진 Nd:YAG 레이저 조사가 calcium fluoride형성 및 치아 내산성에 미치는 영향에 대해 알아보기 위해서 실험을 시행하였다. 소의 영구전치에서 276개의 시편을 제작하여 아무런 처치를 하지 않은 군을 대조군으로 하고 1.23% acidulated phosphate fluoride (APF) 5분, 30분 도포 및 Nd:YAG 레이저 조사에너지 밀도 $20J/cm^2,\;40J/cm^2$의 조건에 따라 불소 도포군, 레이저 조사군, 불소 도포후 레이저 조사군, 레이저 조사후 불소 도포군으로 분류하였다. 불소도포를 시행한 경우 이를 다시 KOH 처리 여부에 따라 나누어 23개의 실험조건을 만들었다. 각 실험조건에 12개의 시편을 배정하고 이중 10개의 시편은 불소 및 무기인 측정에, 나머지 2개의 시편은 표면 관찰에 사용하였다. KOH 비처치군에서 0.1 N HClO4로 enamel biopsy를 시행하여 탈회 법랑질의 불소농도 및 탈회깊이를 측정하였으며 KOH 처치군에서는 1 M KOH로 24시간 처리하여 calcium fluoride를 정량 후 enamel biopsy를 시행하였다. 실험결과 얻어진 자료 및 주사 전자현미경 관찰 소견을 비교하여 다음의 결과를 얻었다. 1. KOH 비처치군에서 탈회된 법랑질의 불소농도는 레이저조사 후 불소도포시 레이저 에너지 밀도 증가에 따라 증가되는 경향을 보였다. 2. KOH 비처치군에서 법랑질 탈회깊이는 불소를 5분 도포후 레이저 $20J/cm^2$를 조사한 경우를 제외하고는 레이저와 불소를 병행하여 처치시 각각을 단독으로 처치시보다 탈회깊이가 작았다 (p<0.05). 3. Calcium fluoride의 양은 레이저의 조사에 의해 유의 있게 증가하지 않았다 (p>0.05). 4. Calcium fluoride 입자는 불소만 도포한 경우에 비해 레이저 조사후 불소도포시 입자크기가 증가되었으며, 불소도포후 레이저 조사시 입자크기의 증가와 함께 일부 융합된 양상을 보였다. 5. KOH 처치군에서 법랑질의 불소농도는 불소를 30분 도포후 레이저를 조사한 경우를 제외하고는 대조군의 불소농도와 유의한 차이가 없었다(p>0.05). 6. KOH 처치군에서 불소와 레이저를 병행한 경우, 불소만 도포한 경우보다 탈회된 법랑질의 깊이가 작았다 (p<0.05). 7. KOH 비처치군에서 탈회된 법랑질의 불소농도와 탈회깊이의 상관관계(Spearman correlation coefficient: -0.6281)는 KOH 처치군(Spearman correlation coefficient: -0.3792)에 비해 높은 음의 상관 관계를 보였고, 동일한 조건으로 불소도포 및 레이저 조사를 시행한 경우에 있어서 KOH 처리 여부에 따른 탈회법랑질 깊이의 유의차가 있는 경우 calcium fluoride의 형성량이 많았다. 이상의 실험결과로 미루어 보아 레이저 조사가 calcium fluoride의 형성량에 영향을 미치지 않았으나 레이저 조사의 영향으로 calcium fluoride의 용해가 감소하는 것으로 판단된다. 또한 불소도포 및 레이저 조사의 병행은 각각을 단독으로 처치한 경우에 비하여 치아 내산성 증가면에서 유리하므로 임상에서 불소도포주기 연장과 같은 유용한 결과를 얻을 수 있을 것으로 생각된다.

• 한국식품영양학회지
• /
• 제31권5호
• /
• pp.577-586
• /
• 2018

The proximate compositions, quality and physicochemical characteristics of mung-bean cultivars cultivated in the north-central region of South Korea with different seeding periods were evaluated. A significant difference was noted in the proximate compositions and chromaticity of mung-beans according to cultivars and different seeding periods. Crude ash and protein content decreased with the delay in seeding period and a slight increase in carbohydrate content was observed. Redness of the other five cultivars increased with the delay in seeding period except for the cultivar Jangan, while the yellowness decreased in cultivars Geumsung and Jangan. Water binding capacity of the $1^{st}$, $2^{nd}$ and $3^{rd}$ seeding on the cultivar Eoul was 115.15, 99.76 and 96.31%, respectively, and a decrease in the binding capacity was observed with the delay in seeding periods. Water solubility index and swelling power were significantly different among cultivars. Total polyphenol content of $1^{st}$ and $2^{nd}$ seeding on the cultivar Jangan was 8.59 and 8.57 mg GAE/g, respectively, and a decrease was observed with the delay in seeding periods except for the cultivar Sohyeon. Total flavonoid content of $1^{st}$ seeding on the cultivar Jangan was 5.25 mg CE/g, which decreased with the delay in seeding periods. DPPH radical scavenging activity of $1^{st}$ seeding on the cultivars Geumsung and Kyungseon was 2.44 and 2.32 mg TE/g, respectively, which decreased with the delay in seeding periods. The BTS radical scavenging activity of $1^{st}$ seeding on the cultivar Jangan was 6.98 mg TE/g. In the present study, the variations in phenol content and radical scavenging activity were observed to be dependent on the cultivars and seeding periods.