• Journal of Ocean Engineering and Technology
• /
• v.24 no.6
• /
• pp.16-22
• /
• 2010

In this paper, the diffraction problems for fixed offshore structures are solved using a hybrid scheme. In this hybrid scheme, potential-based solutions and the Navier-Stokes-based finite volume method (FVM) with a volume-of-fluid (VOF) method are combined. We introduce a buffer zone for efficient wave-making and damping. In this buffer zone, the near field solution from FVM-VOF is gradually changed to Stokes' 2nd order wave solutions. Three different models, including the truncated cylinder, sphere, and wigleyIII model, are numerically investigated in regular waves with a wave steepness of 1/30. The efficiency and accuracy of the hybrid scheme are numerically validated from results using different domain sizes and buffer zones. The wave exciting forces from the FVM-VOF simulations are compared with experiments and potential-based solutions from the higher-order boundary element method (HOBEM). This comparison shows good agreement between the hybrid scheme and potential-based solutions.

• Journal of Welding and Joining
• /
• v.22 no.2
• /
• pp.23-27
• /
• 2004

최근 레이저-아크 하이브리드용접에 대한 연구가 활발히 진행되고 있다. 이미 고출력 $CO_2$ 레이저가 보편화되면서 레이저용접이 차체제작에 널리 사용되고 있으며 고출력 Nd:YAG 레이저의 출현으로 알루미늄 레이저용접의 적용 가능성이 크게 증가하였을 뿐만 아니라 광화이버를 통하여 빔을 전달할 수 있어 좀 더 복잡하고 입체적인 물체를 용접할 수 있는 로봇 레이저 용접을 구현할 수 있게 되었다.(중략)

• Transactions of Materials Processing
• /
• v.20 no.2
• /
• pp.160-166
• /
• 2011

Weight reduction while maintaining functional requirements is one of the major goals in the automotive industry. The use of lightweight magnesium alloys offers great potential for reducing weight because of the low density of these alloys. However, the formability and the surface quality of the final magnesium alloy product for auto-body structures are not acceptable without a careful optimization of the design parameters. In order to overcome some of the main formability limitations in the stamping of magnesium alloys, a new approach, the so-called "hybrid technology", has been recently proposed for body-in-white structural components. Within this approach, necessary level of mechanical joining can be obtained through the use of lightweight material-steel adhesion promoters. This paper presents the development process of an automotive hybrid hood assembly using magnesium alloy sheets. In the first set of material pairs, the selected materials are magnesium alloy AZ31B alloy and steel(SGCEN) as inner and outer panels, respectively. In order to optimize the design of the inner panel, the stamping process was analyzed with the finite element method (FEM). Laser welding by CW Nd:YAG were used to join the magnesium alloy sheets. Based on the simulation results and mechanical test results of the joints, the determination of die design variables and their influence on formability were discussed. Furthermore, a prototype based on the proposed design was manufactured and the static stiffness test was carried out. The results demonstrate the feasibility of the proposed hybrid hood with a weight reduction of 25.7%.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.109-112
• /
• 2006

In the recent studies, various types of multi mode electric variable transmission for hybrid electric vehicle have been proposed. Multi mode electric variable transmission consists of two or more different type planetary gear hybrid powertrain system(PGHP), which can change its power flow type by means of clutches for improving transmission efficiencies. Generally the power flows can be classified into three different types such as Input split, output split nd compound split. In This paper, we present velocity and torque equations of the input-split powertrain and analyze its optimal Performances. There are six combinations of the input-split powertrain, each combination has various lever length. We find optimal planetary gear ratios for fuel economy and acceleration performance, and compare performances of each combination.

• Journal of ILASS-Korea
• /
• v.12 no.2
• /
• pp.101-107
• /
• 2007

The purpose of this study is to analyze spray and evaporation characteristics of DME fuel at the high pressure and temperature. For the numerical analysis of dimethyl ether(DME) fuel spray characteristics, hybrid breakup model was applied to the DME spray and its breakup process. In order to obtain experimental results for comparison with the predicted ones, the visualization of the spray evolution process was executed by using a Nd:YAG laser. Also, the numerical investigation was conducted by the two hybrid models for primary and secondary breakup of the DME spray. The primary breakup model was used the Kelvin-Helmholtz(KH) breakup model. In the secondary breakup process, Rayleigh-Taylor(RT) and Drop Deformation Breakup(DDB) model was applied. The results of this study provide the macroscopic characteristics of the spray such as spray tip penetration and cone angle, and prediction accuracy of the two hybrid model.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.992-994
• /
• 2004

In this paper, hybrid electromagnets using NdFeB permenant magnet are designed by 3-dimensional finite element analysis. Four hybrid magnets levitate the carrier of which total weight including control circuits and battery is 14[kg]. The nominal air gap length of the hybrid magnet is 3[mm]. The control circuit consists of DSP, 4-quadrant chopper, and gap sensor as feedback sensors. As a result, some experimental results for the magnetic levitation control by PI feedback control theory are shown.

• Journal of Welding and Joining
• /
• v.27 no.6
• /
• pp.9-16
• /
• 2009

In this paper, the coaxial monitoring system to capture image of weld pool was developed in laser-arc hybrid welding. In order to obtain the reliable image, green laser was used as a illumination system and measuring components such as band pass filter, ND (Neutral Density) filter and shutter speed was designed and optimized. Using this monitoring system, weld pool images were captured according to laser power, welding speed, welding current and interspace between laser and arc through the experiment. ANOVA (Analysis of Variation) was carried out to identify the influence of process variables on bead widths extracted from captured images of monitoring system. Welding speed and current were major factor to affect weld pool.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.273-277
• /
• 1995

Many hudraulic components have nonlinearities to some extent. These nonlinearities often cause the time delay, thus degrading the performance of the hydraulic control systems and making it difficult to modelthem. In this paper, a new vibration isolation control algorithm that eliminates the necessity of a sophiscated modeling of hydraulic system was proposed. The algotithm is a hybrid type control shecheme consisting of a linear controller and a hetero-synaptic neural network controller. Using this control scheme, simulations and experiments were performed for 1 DOF(Degree of freedom) and 2 DOF vibration isolation. The hybrid type control algorithm can isolate the base vibration signifcantly rather than linear control algorithm. And from the weights in hetero-synaptic neural network, we can get the 2nd equivalent differentialmodel of the hydraulic control system with on-line control operation. This equivalent model provides us with much information, such as stability and the characteristics of the control system.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.1-5
• /
• 1999

The rare-earth ions ($R^{3+}$, R=Nd, Er) doped $CaF_{2}$ layers have been grown on $CaF_{2}$ (111) substrate by molecular beam epitaxy. The surface structure and the crystallinity of $CaF_{2}:R^{3+}$ layers depending on the doping concentration of $R^{3+}$ and layer thickness were studied by reflection high-energy electron diffraction (RHEED). In aspect of application as buffer layer in semiconductor-related hybrid structure, the lattice displacement between $CaF_{2}:R^{3+}$ layers and $CaF_{2}$ (111) substrate was investigated by X-ray rocking curve analysis.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.4
• /
• pp.426-433
• /
• 2021

This study aimed to determine the appropriate salinity condition for optimal cultivation of the juvenile hybrid grouper Epinephleus akaara♀×E. lanceolatus♂ in conditions of decreasing salinity. The survival, growth, metabolic rate, stress, and histological response were investigated in juvenile hybrid grouper exposed to different salinities for 30 days. At 0 psu, the survival rate of the juvenile hybrid grouper was 60% on the 2nd day of exposure and all individuals died on the 3rd day of exposure. At salinities above 3 psu, all animals survived throughout the exposure period. Growth rate for body weight of the juvenile hybrid grouper was the highest in the control and the lowest at 10 psu. Plasma osmolality of the juvenile hybrid grouper exposed to different salinities was 313-355 mg Osmol/kg at salinities above 10 psu, and then decreased to 225-264 mg Osmol/kg at salinities below 5 psu. The oxygen consumption rate tended to decrease as the salinity decreased. Stress responses of the juvenile hybrid grouper were analyzed with decreasing salinity. Therefore, it is considered that a salinity of more than 20 psu is suitable for the culture of the juvenile hybrid grouper.