• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.94-95
• /
• 2007

We have observed electrical properties of ZnO thin films for the fabrication of transparent thin film transistor. ZnO thin films were deposited on $Al_2O_3$(0001) substrate at various temperatures by pulsed laser deposition(PLD). The third of harmonic(355nm) Nd:YAG laser was used for pulsed laser deposition. X-ray diffraction(XRD), field emission-scanning electron microscope(FE-SEM), and photoluminescence were used to characterize physical and optical properties of ZnO thin film.. The results indicated the ZnO film showed good optical properties as increasing temperatures, with low FWHM of exciton-related peak and XRD(0002) peak.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.997-1003
• /
• 2005

Laser welding of dissimilar metals has been widely used to improve a wear resistance and a corrosion resistance of the industrial parts. The objective of this research works is to investigate the influence of the process parameters, such as the welding for SM45C and STS304 with CW Nd:YAG lasers. The bead-on-plate welding tests are carried out for several combinations of the experimental conditions. In order to quantitatively examine the characteristics of the dissimilar welding, the welding qualify of the cut section, stain-stress behavior and the hardness of the welded part are investigated. From the results of the investigation, it has been shown that the optimal welding condition without defects in the vicinity of the welded area and with a good welding quality is 1600W of the laser power, 0.85m/min of welding speed and 4m/min of pressure for shielding gas.

• Medical Lasers
• /
• 제8권2호
• /
• pp.74-79
• /
• 2019

Periorbital melasma is often refractory to treatment and highly associated with rebound hyperpigmentation or mottled hypopigmentation after laser treatment in Asian patients. In this report, we describe 2 patients with cluster-1 periorbital melasma and 1 patient with cluster-2 periorbital melasma who experienced remarkable clinical improvements after microwave-generated, atmospheric-pressure, non-thermal nitrogen plasma treatments. All patients exhibited limited clinical responses after combination treatments with topical bleaching agents, systemic oral tranexamic acid, and low-fluenced Q-switched neodymium (Nd):yttrium-aluminum-garnet (YAG) lasers. Low-energy nitrogen plasma treatment at 0.75 J elicited remarkable clinical improvement in the periorbital melasma lesions without post-laser therapy rebound hyperpigmentation and mottled hypopigmentation. We deemed that a single pass of nitrogen plasma treatment at 0.75 J induces mild microscopic thermal tissue coagulation and modification within the epidermis while preserving the integrity of the basement membrane in patients with periorbital melasma. Accordingly, nitrogen plasma-induced dermal tissue regeneration could play a role in the treatment of melasma lesions.

• Medical Lasers
• /
• 제8권1호
• /
• pp.1-6
• /
• 2019

Background and Objectives A facial laceration is a commonly occurring trauma of children. In addition, appropriate treatment and scar management are very important because the psychosocial impact of facial scars is much greater in children than in adults. Materials and Methods In the authors' hospital, primary closure was conducted targeting a total of 8,924 patients from January 2015 to December 2017. Of these, scar management was conducted on 808 people using a CO₂ fractional laser and Q-Switch Nd:YAG laser. To prove the effectiveness of the laser treatment on the linear scar, the patients were divided retrospectively into children and adults and sub-divided into those who received the treatment and those who did not. The subjective satisfaction of patients was evaluated using the Numeric Rating System (NRS). The objective scar scoring was evaluated using the image panel assessment based on the Vancouver Scar Scale (VSS), and the scoring was made by averaging the evaluations of three plastic surgeons. Results Evaluated NRS showed 8.50 ± 1.83 for adults without a laser, 8.51 ± 1.47 for adults with a laser, 7.93 ± 2.10 for children without a laser, and 8.9 ± 1.24 for children with a laser. The image panel assessment revealed 7.06 ± 1.31 for adults without a laser, 6.40 ± 2.37 for adults with a laser, 6.86 ± 1.45 for children without a laser, and 5.93 ± 1.21 for children with a laser. Conclusion When the linear scar is managed using a CO₂ Fractional laser, it can be managed in children better than adults, which is believed to be useful because it leads to better satisfaction and prognosis.

• 한국재료학회지
• /
• 제16권12호
• /
• pp.777-781
• /
• 2006

Recently, there are a lot of study to alternate polycarbonate which is being used as storage material in CD, DVD. In this study, we alternated polycarbonate with glass. We observed the change of shape in a surface of the glass which was focused by Nd:YAG Laser. The change of shape and property was studied by thermal mechanical analysis (TMA), UV-Vis spectrometer, AFM and SEM. According to Laser power and quantity of additives, the Bump's size and shape are showed differently. In high energy, the Bump will be transformed into Pit. And also according to CTE, $T_d$ and absorption ratio of glass, difference between Bump and Pit is confirmed. From these investigation, we could control that the minimum size of bump which is more useful shape than pit's is about 1.3 $\mu$m, H 70 nm, and it is near same the spot size.

• Journal of Welding and Joining
• /
• 제26권5호
• /
• pp.74-78
• /
• 2008

The laser welding of the car body and components has been spread in the automotive industry. The Nd:YAG laser welding system could be used in 3D welding with robot. However, this system cannot efficiently reduce the welding cycle time according to various welding sequences because the robot's moving time is same that of the resistant spot welding system. But the remote welding system with high power $CO_2$ laser and scanner makes it possible welding cycle time much faster than the robot laser welding system. In the $CO_2$ laser remote welding system, laser beam can be rapidly transferred to a workpiece by moving mirrors of scanner system. So, it makes reducing the cycle time of welding process and shaping various welding patterns easily. Therefore, in this paper, the characteristic of weld strength according to patterns of weld bead on $CO_2$ laser welding was investigated. Also, the relationship between shape of weld bead and value of tensile load was studied. Finally, the optimum remote welding condition for car bumper was investigated.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권1호
• /
• pp.166-173
• /
• 2014

본 연구에서는 레이저 가진을 이용한 초음파 전파 영상 기반 배관 비파괴 검사에 관해 다룬다. 손상의 영상화를 위해 갈바노미터 기반 레이저 미러 스캐너와 Q-Switch Nd: YAG 레이저 시스템을 사용하였다. 레이저 시스템을 가진원으로 사용하면 빠른 속도로 비접촉 초음파 가진이 가능하며, 온도의 변화가 급격한 환경이나 유해 물질이 포함된 환경에서도 대상 구조물의 원거리 가진이 가능하다. 또한 공간 해상도가 높으며, 입사각이 넓어 표면 형상이 복잡한 대상 구조물도 가진이 가능하다. 본 연구에서는 이러한 레이저 시스템으로부터 생성된 유도 초음파를 단일 PZT 센서를 사용하여 계측하고, 계측된 신호는 레이저 가진점에 해당하는 좌표점에 나열함으로써 2차원 공간좌표 및 시간축을 더한 초음파 전파 영상 생성을 위한 3차원 데이터를 구성한다. 이 데이터를 시간 축에 따라 연속적으로 반복 재생하면 초음파 전파 영상을 구할 수 있다. 이 때 웨이블릿 변환을 이용하여 계측 신호의 특정 주파수 성분을 추출해냄으로써 관찰하고자 하는 특정 유도 초음파 모드를 추출할 수 있다. 이러한 일련의 과정으로부터 획득한 초음파 전파 영상 데이터를 시간-공간 영역에서 주파수-wavenumber 영역으로 변환시켜줌으로써 손상 특성을 추출할 수 있다. 본 연구에서는 손상의 진단 및 위치 추정을 위해 wavenumber 필터링 기술을 적용하였으며, 시스템 검증을 위해 다양한 배관구조물 Testbed를 대상으로 실험을 수행하였다.

• 대한소아치과학회지
• /
• 제25권1호
• /
• pp.76-92
• /
• 1998

The purpose of this study was to evaluate the possible efficacy of Nd-YAG laser as a dentin conditioner by observing the laser irradiation dentin surface under scanning electron micrograph and measuring shear bond strength of restored light-cured glass ionomer mold. Fifty intact premolars were prepared for shear bond strength tests. The teeth were randomly divided into five groups as follows; Group I. no treatment Group II. 10% poly acrylic acid, 20 sec Group III. laser treatment 2 w, 20 Hz, 2 sec Group IV. laser treatment 2 w, 20 Hz, 5 sec Group V. laser treatment 2 w, 20 Hz, 10 sec Samples of each group were restored with light-cured glass ionomer cement after dentin conditioning and then measuring the shear bond strength of each specimen were measured using universal testing machine. Additional ten premolars were prepared for SEM analysis The result from the this study can be summarized as follows. 1. Shear bond strength of polyacrylic acid-treated group (II) was significantly higher than other groups (p<0.05). 2. No statistically significant difference could be found between three laser-treated groups (III, IV, V) in shear bond strength(p>0.05) 3. According to the result of observation under SEM, Polyacrylic acid was shown to have removed the smear layer effectively and opened the dentinal tubules, whereas the laser has produced the irregular surface mainly composed of melted and fused structure. The microcracks found in laser-treated groups increased in number with irradiation time and formed the regular mesh-type in 10 sec-irradiation group. 4. The ultrastructural change of dentin surface created by laser irradiation was found to the improper for bonding of the glass ionomer restorative materials. And the lower shear bond strength of laser irradiated group might have been due to the failure to form the suit able dentin surface for the glass ionomer to penetrated into and form the proper micromechanical retention.

• 한국재료학회지
• /
• 제19권9호
• /
• pp.457-461
• /
• 2009

Recently, metal molding has become essential not only for automobile parts, but also mass production, and has greatly influenced production costs as well as the quality of products. Its surface has been treated by carburizing, nitriding and induction hardening, but these existing treatments cause considerable deformation and increase the expense of postprocessing after treatment; furthermore, these treatments cannot be easily applied to parts that requiring the hardening of only a certain section. This is because the treatment cannot heat the material homogeneously, nor can it heat all of it. Laser surface treatment was developed to overcome these disadvantages, and, when the laser beam is irradiated on the surface and laser speed is appropriate, the laser focal position is rapidly heated and the thermal energy of surface penetrates the material after irradiation, finally imbuing it with a new mechanical characteristic by the process of self-quenching. This research estimates the material characteristic after efficient and functional surface treatment using HPDL, which is more efficient than the existing CW Nd:YAG laser heat source. To estimate this, microstructural changes and hardness characteristics of three parts (the surface treatment part, heat affect zone, and parental material) are observed with the change of laser beam speed and surface temperature. Moreover, the depth of the hardened area is observed with the change of the laser beam speed and temperature.

• 전기학회논문지
• /
• 제57권10호
• /
• pp.1802-1806
• /
• 2008

Dye-sensitized solar cell (DSC) based on some advantages such as transparency, cheap materials and anti-sensibility for an anlge of incidence has been expected to capture most of solar cell market in the near future. To practical use of DSC, researches on high efficiency as well as upscaling are necessary. In this study, we tried to insert the grid electrode in DSC and scribe transparent conducting oxide (TCO) using Nd:YAG laser. The grid electrode makes the electron movement improved and diffusional movement minimized. Consequently, the efficiency of DSC was increased by reducing electron loss and the surface resistance of TCO. The grid electrode was made using Ag target by radio frequency sputtering. And the scribed surface was confirmed by taking a scanning electron microscopy photos. As the result, grid cell had improved photocurrent and fill factor as compared with the conventional cell. And the efficiency was increased about 1% by enhanced photocurrent and fill factor.