• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권3호
• /
• pp.199-205
• /
• 2006

Patterned sapphire substrates (PSS) were fabricated by a simple wet etching process with $SiO_2$ stripe masks and a mixed solution of $H_2SO_4$ and $H_3PO_4$. GaN layers were epitaxially grown on the PSS under the optimized 2-step growth condition of metalorganic vapor deposition. During the 1st growth step, GaN layers with triangular cross sections were grown on the selected area of the surface of the PSS, and in the 2nd growth step, the GaN layers were laterally grown and coalesced with neighboring GaN layers. The density of threading dislocations on the surface of the coalesced GaN layer was $2{\sim}4\;{\times}\;10^7\;cm^{-2}$ over the entire region. The epitaxial structure of near-UV light emitting diode (LED) was grown over the GaN layers on the PSS. The internal quantum efficiency and the extraction efficiency of the LED structure grown on the PSS were remarkably increased when compared to the conventional LED structure grown on the flat sapphire substrate. The reduction in TD density and the decrease in the number of times of total internal reflections of the light flux are mainly attributed due to high level of scattering on the PSS.

• Nuclear Engineering and Technology
• /
• 제52권1호
• /
• pp.109-114
• /
• 2020

This work presents the results of laboratory scale tests of the CARBOFLUOREX (CARBOnate FLUORide EXtraction) process - a novel technology for the recovery of U and Pu from the solid fluorides residue (fluorination ash) of Fluoride Volatility Method (FVM) reprocessing of spent nuclear fuel (SNF). To study the oxidative leaching of U from the fluorination ash (FA) by Na₂CO₃ or Na₂CO₃-H₂O₂ solutions followed by solvent extraction by methyltrioctylammonium carbonate in toluene and purification of U from the fission products (FPs) impurities we used a surrogate of FA consisting of UF₄ or UO₂F₂, and FPs fluorides with stable isotopes of Ce, Zr, Sr, Ba, Cs, Fe, Cr, Ni, La, Nd, Pr, Sm. Purification factors of U from impurities at the solvent extraction refining stage reached the values of 10⁴-10⁵, and up to 10⁶ upon the completion of the processing cycle. Obtained results showed a high efficiency of the CARBOFLUOREX process for recovery and separating of U from FPs contained in FA, which allows completing of the FVM cycle with recovery of U and Pu from hardly processed FA.

• 한국농공학회지
• /
• 제28권4호
• /
• pp.41-48
• /
• 1986

This study was fulfilled by the weighing lysimeter method at the experimental farm of KonKuk University from April to June of 1986 to investgate the amount of evapotranspiration ( ET-lettuec )by the growing periods, evapotranspiration ratio, amount of watering per one time, days of intermission and soil moisture extraction pattern of the crisphead lettuce cultivated in the clay loam soil by different watering points of pFl.7, pF2.O, pF2.7. The results obtained are summar ized as follows : 1.The total evapotranspiration(ETlettuce) of the pFl.7 treatment plot was 358,9mm., 314.9mm in the pF2.O plot and 281.8mm in the pF2.7 plot, therefore the total ETlettuec increased with the difference of 33mm-44mm by the decrease of watering point. 2.The daily maximum ETlettuce by the watering points was 7.66mm, 6:54mm, 5.98mm, respectively in the last ten days of May, and the mean daily ETlettuce during the growing season by the watering points of pFl.7, pF2.O and pF2.7 was 5.44mm(384.5g), 4.77mm(337.2g) and 4.27mm(301.8g), respectively. 3.The evapotranspiration ratio showed maximum value in the middle of May which was the beginning of mid-season stage, and the mean evapotranspiration ratio during the total growing period was 1A7, 1.29, 1.15 by the watering points. 4.The days of watering intermission by the watering points of pFl.7, pF2.O and pF2.7 was 1.0day, 2.9days and 12.Sdays, respectively. 5.The yield of the crisphead lettuce by the watering treatments showed very high significance, and the pF2.O was confirmed as a optimum watering point. 6.The soil moisture extraction pattern(SMEP) of the pF2.0 treatment plot in the initial stage was 85.6% in the 1st and 2nd soil layer and 14.4% in the 3rd and 4th layer, and in the midseason stage, the moisture extraction proportion of the under layer accounted for 34.7%which showed that the root elongated to the lowest soil layer, and there was no difference of the SMEP between the mid-season and late-season stage. 7.The correlation coefficient between the ETlettuce and yield of lettuce by the three watering points was.739, which showed the significance of 5%.

• 자원환경지질
• /
• 제34권5호
• /
• pp.471-483
• /
• 2001

토현광산 수계에 분포하는 광산수와 지표수의 pH는 지하수보다 다소 높아 알카리성을 띠며, 동일장소에서 두 번째 채취된 시료에서 더욱 높은 특징을 보인다. 이 지하수는 (Ca+Mg+Na+K)-(HCO$_3$+SO$_4$) 유형, 광산하류의 지표수는 (Ca+Mg)-(SO$_4$) 유형, 갱내수는(Ca+Mg)-(HCO$_3$) 유형에 속한다. 대부분 후기시료에서 음이온 함량이 증가하는 것과는 달리 양이온과 미량원소는 오히려 감소하는 경향을 갖는다. 따라서 각 유형의 수질은 서로 다른 수리지구화학적 성질과 진화경향을 갖는 것으로 보인다. 연구시료의$\delta$$^{18}$ O 및 $\delta$D 자각 -8.1~-9.4$\textperthousand$과 -62.2~-70.1$\textperthousand$이나, 지하수의 d 값은 2.4로서 지표수(5.2) 및 갱내수(7.6)에 비하여 낫다 이 값들은 모두 $\delta$D=8$\delta$$^{18}$ O +(6$\pm$4)자 평행한 범위에 도시된다. 모든 시료의 Sr 함량은 0.028~11.844 mg/ι으로서 큰 편차를 가지나 지하수에서 월등히 높고, $^{87}$ Sr/$^{86}$ Sr 비는 0.7115~0.7129로 비교적 일정하나 지하수에서 가벼운 특징을 갖는다. 또한 $\delta$$^{18}$ \/O ,Ca 및 r은 $^{87}$ Sr/$^{86}$ Sr 증가함에 따라 감소하는 경향이 있다. 이는 순환수와 암석간의 환경등위원소 고환반응보다는 채취지점의 고도효과가 반영된 것 일 가능성이 높다. 순환수-광활의 평형관계를 WATEQ4F로 계산한 결과, 수질에 주성분 원소를 공급할 수 있는 알바이트, 석영, 깁사이트, 석고 등의 포화지수는 대부분 용해성 환경으로 계산되었으며, 방해석과 돌로마이트는 침전조건 에 점토광물들은 침전과 용해의 경계에 집중되었다. 토현광산의 광폐석에서는 황화광물이 많이 산출되며, 이들은 pH 변화에 관계없이 EC와 TDS를 상승시키는데 큰 영향을 미쳤다 갱내수의 SO$_4$ 함량은 최대 181.845 mg/$\ell$ 이나 지표 수에서 급격히 증가하고 지하수에서도 249.927 mg/$\ell$가 검출되었다. 황산염광물들의 용해도를 계산한 결과, 이 SO$_4$$^{2-}$ 의 농집은 약 150 mg/$\ell$ 이상에서 포화상태에 도달할 것으로 나타났다.

• Journal of Periodontal and Implant Science
• /
• 제26권2호
• /
• pp.511-521
• /
• 1996

Periodontal pocket is one of the most frequently developed clinical feature on the teeth with periodontal disease. In order to determine the gingival curettage effect of intrapocket irradiation of a pulsed Nd : YAG laser on periodontally involved teeth, bilateral 60 teeth with $4{\sim}6mm$ in probing pocket depth 1 week after supragingival scaling were selected. On half of them the intrapocket irradiation($300{\mu}m$ fiber optic, 1.5W power, for 2min.) of a pulsed-Nd : YAG laser(EL.EN.EN06O, Italy) was applied as the lased group. On the contralateral 30 teeth the subgingival curettage was accomplished by Gracey curettes as the curattage group. The periodontal pocket tissues were surgically excised by the modified Widman flap technique immediately after the intrapocket irradiation or subgingival curettage, subsequently fixed with 10% neutral formalin, sectioned in $4{\sim}6{\mu}m$ thickness, and stained with hematoxylin-eosin. Surface characteristics and incomplete removal of the pocket epithelium were evaluated under light microscope. And the difference between the lased group and the curettage group was statistically analyzed by Chi-square test in Microstat program. The results were as follows ; 1. The plane surface was observed more frequently in the curettage group(73.3%) than in the lased group(23.3%), and the rough surface was observed more frequently in the lased grOoup(63.3%) than in the curettage group(6.7%)(p<0.05). 2. The rate of incomplete removal of the pocket epithelium was relatively high in both the lased group(76.6%) and the curettage group(86.6%), and there was no significant difference between the lased group and the curettage group(p>0.l). The results suggest that the further studies including various power control of laser should be succeeded in order to obtain more favorable results by the intrapocket irradiation of a pulsed Nd:YAG laser than the subgingival curettage with Gracey curettes.

• 한국해양공학회지
• /
• 제9권2호
• /
• pp.141-148
• /
• 1995

Fatigue tests were carried out by a rotary bending testing machine of cantilever type. M.E.F.(ferrite encapsulated islands of martensite) materials were made by a series of heat treatment from a low carbon steel(SM 20 C). The fatigue tests were conducted at stress levels of 302 MPa and with frequencies of 25Hz, 2.5 Hz and 0.5 Hz in 3% NaCl solution. The fatigue strength increased with frequency got higher. The microcracks and corrosion pits were generated at the boundary between the matrix and the 2nd phase. The cracks generated by the corrosion pits were coalesced with the pits around the notch and became the initial crack. The $N_i/N_f$ ratio increased as the frequency and stress level decreased. The interference phenomenon increased with stress level and frequency gots higher. The crack propagation rate was delayed as the stress level lowers and the frequency gets higher, however, the range of the stress intensity factor depended only on a stress level.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.79-79
• /
• 2008

We report the growth of $Ba_{0.5}Sr_{0.5}TiO_3$(BST) thin films and their substrate-dependent electrical characteristics. BST thin films were deposited on alumina(non-single crystal), $Al_2O_3$(100) substrates by Nd:YAG Pulsed Laser Deposition(PLD) with a 355nm wavelength at substrate temperature of $700^{\circ}C$ and post-deposition annealing at $750^{\circ}C$ in flowing $O_2$ atmosphere for 1hours. BST materials had been chosen due to high dielectric permittivity and tunability for high frequency applications, To analyze the oxygen partial pressure effects, deposited films at 1, 10, 50, 100, 150, 200, 300 mTorr. The effects of oxygen pressure on structural properties of the deposited films have been investigated by X-ray diffraction(XRD) and atomic force microscope(AFM), respectively. Then we manufactured a inter-digital capacitor(IDC) patterns twenty fingers and $10{\mu}m$ gap, $700{\mu}m$ length and electrical properties were characterized. The results provide a basis for understanding the growth mechanisms and basic structural and electrical properties of BST thin films as required for tunable microwave devices applications such as varactors and tunable filters.

• Tuberculosis and Respiratory Diseases
• /
• 제46권4호
• /
• pp.500-511
• /
• 1999

연구배경: 비 혹은 안면마스크를 이용한 비침습적 양압호흡법(NPPV)은 안정된 만성호흡부전환자를 대상으로 사용되었으며, 최근 급성호흡부전환자를 대상으로도 시도되고 있다. 일부 연구에서 기계호흡이탈후 발생한 호흡부전에서 NPPV를 시도하여 기관내삽관을 피할 수 있음을 보고한바 있으나, 기계호흡이탈의 한 방법으로 시도된 예는 거의 없다. 본 연구자는 장기간 침습적 기계호흡중인 환자에서 의도적으로 ET를 제거한 후 NPPV틀 적용하여 새운 이탈방법으로서 효용성이 있는지를 알아보고자 하였다. 대상 및 방법: 1회이상 이탈시도가 실패하였고, 압력보조 요구량이 8-15cm $H_2O$, PEEP 요구량이 5-10cm $H_2O$ 사이이며, 기계환기 시작 후 10일 이상 경과되어 기관절개술 시행을 고려중인 환자로서 NPPV 적응증을 만족시키는 12명(14회)을 대상으로 하였다. 기관내관 제거 후 안면마스크를 이용하여 NPPV를 시작하였다. NPPV 적용 직전, 적용후 30분, 1-6시간, 6-12시간, 12-24시간, 2일째, 3일째, 그리고 NPPV 이탈 직전에 분당호흡수, 동맥혈가스검사, 압력보조수준, 그리고 호기말양압 수준을 측정하였다. 이탈후 기계호흡없이 48시간 이상 자가호흡을 유지한 예를 성공군으로 정의하였다. 결 과: 의도적 ET 제거후 NPPV에 의한 기계호흡 이탈을 시도한 14예중 7예(50%)에서 이탈에 성공하여 기관절개를 피할 수 있었다. 양군에서 나이, 입원당일의 APACHE III 점수, 기관내삽관 기간, NPPV 시행직전의 분당호흡수, 동맥혈가스검사, $PaO_2/FiO_2$, 압력보조수준, 호기말양압 수준에 차이가 없었다. 성공군에서 NPPV 전후의 분당호흡수, 압력보조수준, 흡기말양압, 동맥혈가스소견 및 $PaO_2/FiO_2$가 차이 없었으나 실패군은 NPPV 후 30분에 동맥혈 pH가 유의하게 감소하였다($7.40\pm0.08$ vs. $7.34\pm0.06$, p<0.05). 이탈실패의 원인은 동맥혈가스검사소견 악화 3예, 기도내 분비물 축적 2예, 마스크 부적응 1예, 그리고 늑골골절에 의한 flail chest 1예이었다. 결 론: 비침습적 양압호흡법은 급성호흡부전에 의한 장기적 기계호흡 환자에서 새로운 기계호흡이탈 방법으로 기대된다.

• 자원리싸이클링
• /
• 제26권4호
• /
• pp.26-33
• /
• 2017

본 연구에서는 저농도(약 1 ppm 이하)의 희토류가 함유되어 있는 산업폐수로부터 중희토류의 회수 가능성을 알아보기 위하여 PC88A를 이용한 중희토류 용매추출 거동을 확인하였다. 평형 pH, 추출제 농도, 추출 상비(A/O) 변화를 통해 PC88A에 의한 중희토류의 추출 거동을 확인하였고 $HNO_3$, HCl, $H_2SO_4$ 세 가지 무기산을 이용하여 탈거 거동을 확인하였다. 평형 pH 0에서 중희토류의 추출이 시작되었으며 평형 pH 1.0에서 중희토류의 추출이 95~100% 완료되었다. 모든 추출 조건에서 원자번호가 높은 물질부터 (Yb > Tm > Er > Dy > Nd > Pr > La) 우선적으로 추출되는 경향을 보였으며 추출 상비(A/O) 10/1일 때 Yb과 Tm이 최대로 농축되어 초기 농도 대비 각각 6배, 3배 증가하였다. 이 후 희토류의 탈거 거동을 확인하고자 희토류 원소가 추출된 유기상과 세가지 무기산을 각각 사용하여 비교하였고 $HNO_3$, $H_2SO_4$, HCl 순으로 최대 탈거율이 높게 나타났다.

• 대한화학회지
• /
• 제55권4호
• /
• pp.594-602
• /
• 2011

4[N-(furfural)amino]antipyrine semicarbazone(FFAAPS)와 질산 란탄(III)이 형성하는 배위화합물의 입체화학에 미치는 ${\alpha}$-, ${\beta}$- 및 ${\gamma}$-picolines의 영향을 연구하였다. 이들 배위화합물의 일반적 조성은 [Ln(FFAAPS)$(NO_3)_3$Pic] (Ln=La, Pr, Nd, Sm, Gd, Tb, Dy 또는 Ho 및 Pic=${\alpha}$-, ${\beta}$- or ${\gamma}$-picolines)이다. 모든 배위화합물은 원소분석, 분자량, 몰전기전도도, 자기수자율, 적외선 및 자외선 스펙트럼으로 특성을 조사하였다. 적외선 연구결과 FFAAPS는 N, N, O 주개를 갖는 중성 삼배위 리간드로 행동하는 반면, ${\alpha}$-, ${\beta}$- 또는 ${\gamma}$-picoline는 헤테로 N-원자를 통하여 란탄(III) 이온에 배위된다. 질산 음이온은 이들 화합물에서 이배위로 결합한다. 자외선 스펙트럼 결과로부터 전자구름 퍼짐 효과(${\beta}$), covalence factor($b^{1/2}$), Sinha parameter (${\delta}%$) 및 covalence angular overlap parameter(${\eta}$)를 계산하였다. 이들 착물의 열적성질을 열무게 분석법에 의해 연구하였다. 본 화합물에 있어서 란탄(III)의 배위수는 10으로 조사되었다. 기본 리간드인 FFAAPS와 착물의 항박테리아 선별조사 결과, 이들 착물은 중간 정도의 항박테리아 활성을 보였다.