• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2004년도 하계학술연구발표회 논문개요집
• /
• pp.188-188
• /
• 2004

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1993년도 춘계연구발표회 논문개요집
• /
• pp.64-65
• /
• 1993

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2005년도 하계학술연구발표회 논문개요집
• /
• pp.142-143
• /
• 2005

• 한국자기학회지
• /
• 제5권5호
• /
• pp.507-510
• /
• 1995

A heat-treatment method of pre-annealing and then flash annealing(FA) has been used to improve the soft magnetic properties of nanocrystalline $Fe_{76}CuSi_{13}B_{10}$ and $Fe_{74}CuNb_{3}Si_{12}B_{10}$ alloys. Outstanding magnetic properties of nanocrystalline $Fe_{74}CuNb_{3}Si_{12}B_{10}$ alloy were attained by flash-annealing in air after annealed at $500^{\circ}C$ for 0.5hr below the crystallization temperature. The same results were obtained for $Fe_{74}CuSi_{13}B_{10}$ alloy. The measurment of relief of stress and X-ray diffraction were used to analyze the effect of flashannealing.

• 한국자기학회지
• /
• 제17권5호
• /
• pp.198-204
• /
• 2007

비정질 FeCuNbSiB 리본 합금의 파쇄분말을 $1{\sim}3\;{\mu}m$의 두께로 편상화한 다음, $375{\sim}525^{\circ}C$의 온도범위에서 1 h 동안 열처리한 후 폴리머 중에 분산시켜 준마이크로파 대역의 전자파 노이즈 억제용 복합 시트를 제조하였다. 이 때 어닐링 온도가 복합 시트의 전자파 전송손실(전력손실)에 미치는 영향을 조사한 결과, $425{\sim}475^{\circ}C$에서 열처리하여 부분 나노결정 구조를 얻었을 때 가장 높은 전력손실 값을 나타내었으며, ${\alpha}-Fe$상으로 결정화 정도를 더 높여 보다 우수한 연자성을 얻게 되는 $525^{\circ}C$에서의 열처리에 의해서는 오히려 전력손실 특성이 저하되었다. 이와 같은 전자파 흡수 특성의 어닐링 온도 의존성은 각각 $425{\sim}475^{\circ}C$에서 나타나는 높은 복소 투자율의 허수항(${\mu}"$) 및 $525^{\circ}C$에서의 큰 투과 파라미터($S_{21}$)에 그 주된 원인이 있는 것으로 판단되었다. 한편 열처리하지 않은 비정질 상태에서는 ${\mu}"$ 값이 작아 매우 낮은 전력손실을 나타내었다.

• 한국재료학회지
• /
• 제21권1호
• /
• pp.1-7
• /
• 2011

Methods of producing hydrogen include steam reforming, electrochemical decomposition of water, and the SI process. Among these methods, the Sulfur iodine process is one of the most promising processes for hydrogen production. The thermochemical sulfur-iodine (SI) process uses heat from a high-temperature-gas nuclear reactor to produce $H_2$ gas; this process is known for its production of clean energy as it does not emit $CO_2$ from water. But the SI-process takes place in an extremely corrosive environment for the materials. To endure SI environments, the materials for the SI environment will have to have strong corrosion resistance. This work studies the corrosion resistances of the Fe-Si, Ni-Ti and Ni Alloys, which are tested in SI-process environments. Among the SI-process environments, the conditions of boiling sulfuric acid and decomposed sulfuric acid are selected in this study. Before testing in boiling sulfuric acid environments, the specimens of Fe-4.5Si, Fe-6Si, Ni-4.5Si, Ni-Ti-Si-Nb and Ni-Ti-Si-Nb-B are previously given heat treatment at $1000^{\circ}C$ for 48 hrs. The reason for this heat treatment is that those specimens have a passive film on the surface. The specimens are immersed for 3~14 days in 98wt% boiling sulfuric acid. Corrosion rates are measured by using the weight change after immersion. The corrosion rates of the Fe-6Si and Ni-Ti-Si-Nb-B are found to decrease as the time passes. The corrosion rates of Fe-6si and Ni-Ti-Si-Nb-B are measured at 0.056 mm/yr and 0.16 mm/yr, respectively. Hastelloy-X, Alloy 617, Alloy 800H and Haynes 230 are tested in the decomposed sulfuric acid for one day. Alloy 800H was found to show the best corrosion resistance among the materials. The corrosion rate of Alloy 800H is measured at -0.35 mm/yr. In these results, the corrosion resistance of materials depends on the stability of the oxide film formed on the surface. After testing in boiling sulfuric acid and in decomposed sulfuric acid environments, the surfaces and compositions of specimens are analyzed by SEM and EDX.

• 연구논문집
• /
• 통권34호
• /
• pp.121-129
• /
• 2004

The influence of powder size and ball-milling time on the magnetic properties of $Fe_{73}Si_{16}B_7Nb_3Cu_1$ nanocrystalline alloy powder was investigated. Flake-shaped powders were produced by pulverizing the ribbons annealed at $550^\circC$ for 1 hour. The powders were classified and consolidated into core shapes at a pressure of 18ton/$cm^2$. The initial permeability at 100kHz of the inductor core produced using $53-75\mum$ powders showed the highest value although its consolidated density showed the lowest one. The reason for the result is due to the cracking of the particles larger than $75\mum$ during the consolidation process. The ball-milling of powders for 2-4 hours improved the consolidation density and the initial permeability of the cores. The intrinsic coercivity of the powder decreased as well, resulting from the stress relief of the powder by a short-time milling.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.511-514
• /
• 1995

The crystallization kinetics of $Fe_{73.5}Si_{13.5}B_{9}Cu_{1}Nb_{3}$ amorphous alloy has been investigated using differential scanning calorimetry (DSC). The crystallization process had two stages, i.e. precipitation of the $\alpha$-Fe(Si) solid solution and the tetragonal borides. The isothermal transformation data of the amorphous alloy has been fitted successfully to the generalized Johnson-Mehl-Avrami equation. The mean time exponent, n, obtained is close to 2.5. The value of n=2.5 may be interpreted as being due to a diffusion-controlled transformation process with a constant nucleation rate, one likely transformation mode for the crystallization of metallic amorphous alloys. The activation energy of the overall crystallization process deduced from the time to 50% crystallization are about 81 kcal/mole. The value is of the same order as those estimated from viscous flow.

• 한국자기학회지
• /
• 제4권1호
• /
• pp.12-19
• /
• 1994

비정질 $Fe_{73.5}Cu_{1}Nb_{3}Si_{16.5}B_{6}$ 합금의 $552^{\circ}C$에서 등온열처리시간에 따른 결정화 거동을 $M\"{o}ssbauer$ 분광법으로 연구하였다. 열처리된 시료는 $Do_{3}-FeSi$ 초미세결정립, Cu-cluster 및 비정질이 공존함이 $M\"{o}ssbauer$ spectrum 분석에 의해 확인되었다. 결정화 초기단계에 Cu-cluster가 형성되기 때문에 FeSi 초미세결정립의 Si함량은 높아지며, 열처리시간이 60분이 될 때까지 Si함량은 감소하는데 이는 FeSi 초미세결정립의 평균초미세자기장의 증가를 일으키며, 이후 Si함량은 거의 일정하다. 60분 이후의 열처리에서 FeSi 초미세결정립과 잔류비정질의 체적분율이 미소하게 변화함에도 잔류비정질의 평균초미세자기장이 감소하는 것은 잔류비정질에서의 Nb, B원자의 존재비의 증가에 기인된다. $552^{\circ}C$에서 60분 열처리 할 경우 FeSi 초미세결정립과 잔류비정질의 초미세자기장의 방향이 모두 무질서하게 분포된다. FeSi 초미세결정립과 Cu-cluster의 Avrami지수는 각각 0.51, 0.65, 잠복기는 각각 2.4분, 0.8분, 활성화에너지는 각각 2.35 eV, 2.44 eV이며, Cu-cluster가 FeSi 초미세결정립보다 먼저 생성된다는 것은 Cu 원자가 FeSi 초미세결정립의 생성을 촉진시킨다는 해석과 부합한다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.125.1-125.1
• /
• 2008