• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.284-284
• /
• 2007

In this study, the microwave dielectric property variations of (1-x)$BiNbO_4-(x)ZnNb_2O_6$ composites (x=0.3, 0.5 and 0.7) with 10wt% zinc borosilicate(ZBS) glass was investigated as a function of the substitution of $ZnNb_2O_6$ with a view to applying thes system to LTCC technology. The all composition addition of 10wt% ZBS glass ensured a successful sintering below $900^{\circ}C$. In addition, a small amount of $Bi_2SiO_5$ as the secondary phase was observed in the all composition. The substitution of $ZnNb_2O_6$ on the $BiNbO_4$ composites increased the $Q{\times}f$ values, but it decreased the sinterability and dielectric constant due to the high sintering temperature and low dielectric constant of $ZnNb_2O_6\;than\;BiNbO_4$ ceramics. The increasing of $ZnNb_2O_6$ content from 0.3 to 0.7 in the (1-x)$BiNbO_4-(x)ZnNb_2O_6$ composites with 10wt% ZBS glass sintered at $900^{\circ}C$ demonstrated 28.1~15.6 in the dielectric constant$({\varepsilon}_r)$, 5,500~8,700GHz in the $Q{\times}f$ value.

• 대한치과기공학회지
• /
• 제28권1호
• /
• pp.19-26
• /
• 2006

The effect of Nb on interfacial bonding characteristics of Ni-Cr alloy for porcelain fused to metal crown (PFM) has been studied in order to investigate oxide layer. A specimens of Ni-Cr alloy, which is 0.8mm in thickness, within the porcelain furnace of 1,000$^{\circ}C$ with four tests such as air, vacuum, air for 5 minutes and vacuum for 5 minutes in order to examine an oxide behavior of alloy surface generated by the adding of Nb to be controlled at a rate of 0, 1, 3 and 5. Oxide film was observed form of the fired specimens with scanning electron microscope (SEM), and at the same time it measured Electron Probe Micro Analyzer (EPMA). The result of this study were as follows: 1. Cr oxide film and Nb oxide film were observed from the surface of specimen to be controlled at a rate of Nb 1%. 2. Nb oxide film was observed from the interface of specimens to be controlled at a rate of Nb 1% and 3%. 3. The stability of oxide films that treated in air were more stable than treated under vacuum.

• 한국주조공학회지
• /
• 제23권4호
• /
• pp.204-211
• /
• 2003

Ti-3wt.%Nb(${\alpha}$type), Ti-20wt.%Nb(${\alpha}+{\beta}$,type) and Ti-40wt.%Nb(${\beta}$type) alloys were melted by vacuum are remelting. The specimens were homogenized at 1050$^{\circ}C$ for 24 hr and were then hot rolled to 50% reduction. Each alloys were solution heat treated at ${\beta}$ zone and ${\alpha}+{\beta}$, zone after homogenization, and then aged. The microstructural and hardness changes in Ti-Nb alloys with Nb contents were investigated by SEM, XRD and hardness tester. The microstructural change from equiaxied to acicular and the increase of ${\beta}$ phase in Ti-Nb alloys were obtained when the Nb content increased. The higher hardness value of ${\alpha}+{\beta}$type alloy was obtained compared to the other alloys.

• 소성∙가공
• /
• 제30권6호
• /
• pp.301-305
• /
• 2021

The role of Nb addition in the tension and corrosion responses of ferrite-based stainless-steel sheets processed by cold-rolling and annealing treatment at 1173 °K was studied to evaluate the possibility for commercialization. For this purpose, the grain sizes in the samples with and without Nb content were controlled to be reasonably identical by utilizing different heat treatments within the specific range for 60 seconds. The corrosion properties of both samples were evaluated based on the analysis of polarization curves. Room-temperature tension testing showed that the strength of the sample with Nb was much higher than that without Nb whereas the elongation of the sample with Nb was slightly lower than that without Nb. The polarization curves revealed that the addition of Nb contributed to the significant improvement in protective capabilities. We thought that such combinational behavior was mainly due to the formation of niobium carbides found in the ferritic matrix.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.880-894
• /
• 1995

B의 함유량을 6 at% 고정하고 Nd함유량을 3~5 at%로 변화시킨 $\alpha$-Fe기 Nd-Fe-B 합금의 자기특성이 조사 되었다. 급속응고법으로 제조된 $Nd_{x}{(Fe_{0.9}Co_{0.1})}_{90-x}B_{6}Nb_{3}Cu_{1}(x=\;3,\;4,\;5)$ 비정질합금은 열처리에 의하여 초미세결정립으로 결정화하며, Nd의 함유량에 따라 잔류자화 및 보자력이 변한다. x=3의 경우 최적열처리조건에서 $\alpha$-Fe(Co) 부피분율의 증가로 잔류자 화는 증가하나, 보자력은 감소한다. 그러나 Nd 함유량의 증가는 $Nd_{2}{(Fe,\;Co)}_{14}B$ 부피분율의 증가로 인하여 잔류자화는 감소하나 보자력은 향상된다. $640^{\circ}C$, 10 min 열처리조건에서 $Nd_{5}{(Fe_{0.9}Co_{0.1})}_{85}B_{6}Nb_{3}Cu_{1}$의 결정립크기는 약 20 nm이며, 잔류자화, 보자력 및 최대에너지적 은 각각 1.35 T, 219 kA/m (2.75 kOe) 및 $129\;kJ/m^{3}$ (16.2 MGOe)으로 가장 우수하다.

• 폴리머
• /
• 제27권5호
• /
• pp.429-435
• /
• 2003

양이온η$^3$-알릴 팔라듐 촉매를 사용하여 환상형 올레핀 단량체인 노보넨 (NB)과 5-비닐-2-노보넨(VNB)을 조성별로 비닐 부가 공중합하였다. 공중합체는 고수율과 고분자량 (M$_{w}$ > 760000)으로 얻을 수 있었다. VNB 함량이 많아질수록 공중합체의 분자량과 수득율은 감소하였으며, 첨가한 공단량체의 양과 공중합한 후 함유된 단량체의 양이 비례함을 FT-IR 분광분석으로 확인하였다. $^1$H-NMR 분석 결과 VNB는 exo, endo 이성체 모두 중합에 참여하는 것을 알 수 있었다. NB-VNB 공중합체의 분해 개시 온도는 약 300 $^{\circ}C$이었고, 열안정성은 VNB 함량과 관계없이 유사한 거동을 나타내었다. 합성된 NB-VNB 공중합체의 곁사슬 비닐기는 m-CPBA를 이용하여 에폭시화 하였고, 또한 9-BBN을 이용하여 수산화기를 도입하였다. 조성별 공중합체에 각각의 치환기가 도입된 것은 FT-IR, $^1$H-NMR 분석으로 확인하였다..

• 한국재료학회지
• /
• 제13권11호
• /
• pp.761-768
• /
• 2003

The corrosion resistance and cytotoxicity behavior of Ti alloys were studied as a function of Nb contents(3wt.%Nb, 20wt.%Nb, 40wt.%Nb). Ti-Nb alloys were melted by vacuum arc furnace and then rolled to 50% reduction ratio after homogenized at 105$0^{\circ}C$ for 24hrs. The corrosion resistance of Ti-Nb alloys were investigated by potentiodynamic polarization test in the 0.9% NaCl and 5% HCI solution. Biocompatibility of Ti-Nb alloys was evaluated by cytotoxicity test. The results can be summarized as follows 1) The microstructure change from equiaxial to acicular and the increased $\beta$ phase in Ti-Nb alloys were obtained as the Nb content increased. 2) For the corrosion test in the solution of 0.9% NaCl and 5% HCI, the corrosion behavior of Ti-Nb alloys was similar to ASTM grade 2 CP Ti. 3) For the cytotoxicity test, Ti-Nb alloys showed excellent biocompatibility compared to ASTM grade 2 CP Ti, 316L STS and Co-Cr alloys.

• 한국전기전자재료학회논문지
• /
• 제25권11호
• /
• pp.867-872
• /
• 2012

In this study, in order to develop excellent lead free piezoelectric ceramics for piezoelectric actuators application, $Li_{0.04}(Na_{0.50}K_{0.50})_{0.96}[(Nb_{0.86}Ta_{0.10}Sb_{0.04})_{0.994}Co_{0.015}]O_3+0.0025SrO+0.15\;wt%K_2CO_3+x\;wt%Nb_2O_5$ (x = 0 - 0.5 wt%) (abbreviated as LNKNTSCS-xN) ceramics were fabricated by a conventional sintering technique. the phase structure, microstructure and electrical properties were investigated with a emphasis on the influence of the $Nb_2O_5$ content. High electrical properties of $d_{33}$=234 pC/N, kp=0.392, ${\varepsilon}_r$=1,395, ${\rho}=4.70g/cm^3$ were obtained from the specimen with x=0.4 wt%, which suggests that the composition ceramics is a promising lead-free piezoelectric material.

• 한국재료학회지
• /
• 제2권1호
• /
• pp.65-75
• /
• 1992

0.4wt% C을 함유하는 기존의 기계구조용 탄소강에 V과 Nb을 단독 또는 복합으로 첨가한 열간단조용 비조질강의 기계적 성질을 조사하고, 미세조직과 셔출물의 분포 및 형상을 관찰하였으며 첨가원소의 영향을 정량화 하기 위해 중회귀분석을 행하였다. 인장시험 결과 모든 재료의 인장강도는 $70kg/\textrm{mm}^2$ 이상으로 기존의 소입.소려재(S45C)와 동등하거나 그 이상이었으며, 충격시험 결과 대부분 재료의 충격에너지는 40J 이하로 기존 재료의 약 50%정도였 다. V함량이 0.10에서 0.l5wt%로 증가하였을 경우 인장강도는 약 20% 증가하였으나 충격에너지는 감소하였다. 이는 VC의 미세석출에 의해 석출강화 효과와 함께 펄라이트의 부피분율이 증가하고 층간거리가 감소했기 때문이다. 반면 Nb 함량이 0.05에서 0.10wt%로 증가한 경우에는 강도와 인성의 근소한 증가경향을 나타내었다. 이는 NbC의 석출애 의한 결정립 미세화 효과가 VC 보다 우세했기 때문이다. 또한 V+Nb의 복합첨가는 단독첨가시에 비하여 충격인성의 향상에 보다 효과적이었으며, 본 실험에서 최적 강도와 인성의 조합을 보인 합금조성은 0.4C-1.19Mn-0.05S-0.12V-0.07Nb로 인장강도는 $84kg/\textrm{mm}^2$ 이상, 충격인성은 34J 이상이었다.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.15-15
• /
• 2002

Homogeneous and crack-free potassium lithium niobate (K₃Li/sub 2-x/Nb/sub 5+x/O/sub 15/, 0＜x＜0.5, KLN) single crystals were successfully grown by the Czochralski technique. The KLN single crystals of several different compositions were employed for the investigation of the lattice vibration spectra using infrared Raman spectroscopy. The characteristic Raman spectra of the [NbO/sub 6/]/sup 7-/ octahedral ions were strikingly influenced by the Li ion content. The symmetric stretch vibrational modes V₁, V₂ are broadened, and the symmetric bend vibration mode V/sub 5/ is broadened and even split into three peaks with increasing the Li content, supporting that the bend vibration modes of the [NbO/sub 6/]/sup 7-/ octahedrons are obviously perturbed by Li ions in the C site. Enhanced Raman peak intensities after the post annealing at 900℃ and for 24 h evidenced that a residual stress in as-grown crystals was negligible and only a defect concentration might be reduced.