• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.4
• /
• pp.215-223
• /
• 2019

This paper analyzes navigation performances of the Korean Positioning System (KPS) constellation with respect to the orbit parameters which fulfills the specification requirements. Specifically, the satellite configuration and navigation requirements of KPS are explained, and the daily mean horizontal dilution of precision (HDOP) and satellite visibility on KPS coverage are analyzed to confirm the adequate orbit parameters. However, due to orbital slot saturation, geostationary-orbit (GEO) satellites may not be allocated in the original orbit as specified in the KPS requirements. Therefore, in a spanned window of 4 degrees from the reference longitude the navigation performance of each GEO satellite orbit is investigated.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.1
• /
• pp.15-24
• /
• 2018

This study analyzed positioning accuracy of the multi-differential global navigation satellite system (DGNSS) algorithm that integrated GPS, GLONASS, and BDS. Prior to the analysis, four sites of which satellite observation environment was different were selected, and satellite observation environments for each site were analyzed. The analysis results of the algorithm performance at each of the survey points showed that high positioning performance was obtained by using DGPS only without integration of satellite navigation systems in the open sky environment but the positioning performance of multi-DGNSS became higher as the satellite observation environments degraded. The comparison results of improved positioning performance of the multi-DGNSS at the poor reception environment compared to differential global positioning system (DGPS) positioning results showed that horizontal accuracy was improved by 78% and vertical accuracy was improved by 65% approximately.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.15 no.1
• /
• pp.11-17
• /
• 2007

One of the key elements for developing GNSS (Global Navigation Satellite Systems) is the comprehensive analysis of GNSS satellite orbit including the capabilities to generate precision navigation message. The orbit characteristics of Japan's own GNSS system, called QZSS (Quasi Zenith Satellite System) is analyzed and its navigation message, which includes orbit elements and correction terms, is investigated. QZSS-type orbit simulations were performed using a precision orbit integrator in order to analyze the effect of perturbation forces, e.g. gravity, Moon, Sun, etc., on the orbit variation. A preliminary algorithm for creating orbit element corrections was developed and its accuracy is evaluated with the simulation data.

• Journal of Positioning, Navigation, and Timing
• /
• v.13 no.2
• /
• pp.167-177
• /
• 2024

The Korea Augmentation Satellite System (KASS) has been certified by the Ministry of Land, Infrastructure and Transport (MOLIT) and commenced Safety-of-Life (SoL) service at the end of 2023. KASS complies with the APV-I signal-in-space performance requirements defined in the International Civil Aviation Organization (ICAO) Standards and Recommendation Practices (SARPs). The performance of KASS is verified through two steps. In the first step, design conformity from the aspect of performance is verified by both review and analysis of design and simulation. In the second step, operational conformity is tested and assessed by operational testing using real data and a deployed system with operational SWs and configurations. This paper presents a methodology, a procedure and results for the KASS operational testing. Finally, performance degradation events and results by month and region during the operational testing are presented and analyzed.

• Journal of Positioning, Navigation, and Timing
• /
• v.13 no.1
• /
• pp.1-13
• /
• 2024

In this paper, we investigate the signal design of six (USA, EU, Russia, China, Japan, and India) countries for Global Navigation Satellite Systems (GNSS). Recently, a navigation satellite system that is capable of high-precision and reliable Positioning, Navigation, Timing (PNT) services has been developed. Prior to system design, a survey of the signal design for other GNSS systems should precede to ensure compatibility and interoperability with other GNSS. The signal design includes carrier frequency, Pseudorandom Noise (PRN) code, modulation, navigation service, etc. Specifically, GNSS is allocated L1, L2, and L5 bands, with recent additions of the L6 and S bands. GNSS uses PRN code (such as Gold, Weil, etc) to distinguish satellites that transmit signals simultaneously on the same frequency band. For modulation, both Binary Phase Shift Keying (BPSK) and Binary Offset Carrier (BOC) have been widely used to avoid collision in the frequency spectrum, and alternating BOCs are adopted to distinguish pilot and data components. Through the survey of other GNSS' signal designs, we provide insights for guiding the design of new satellite navigation systems.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.1
• /
• pp.8-14
• /
• 2013

As GNSS(Global Navigation Satellite System) is used in various filed, many countries establish GNSS system independently. But GNSS system has the limitation of accuracy and stability in stand-alone mode, because this system has error elements which are ionospheric delay, tropospheric delay, orbit ephemeris error, satellite clock error, and etc. For overcome of accuracy limitation, the DGPS(Differential GPS) and RTK(Real-Time Kinematic) systems are proposed. These systems perform relative positioning using the reference and user receivers. ETRI(Electronics and Telecommunications Research Institute) is developing precision navigation system in point of extension of GNSS usage. The precision navigation system is for providing the precision navigation solution to common users. If this technology is developed, GNSS system can be used in the fields which require precision positioning and control. In this paper, we introduce the precision navigation system and perform design and algorithm verification.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.1
• /
• pp.23-35
• /
• 2023

Korea Augmentation Satellite System (KASS) is a satellite-based augmentation system (SBAS) that provides approach procedure with vertical guidance-I (APV-I) level corrections and integrity information to Korea territory. KASS is used to monitor navigation performance in real-time, and this paper introduces the design, implementation, and verification process of mission monitoring (MIMO) in KASS. MIMO was developed in compliance with the Minimum Operational Performance Standards of the Radio Technical Commission for Aeronautics for Global Positioning System (GPS)/SBAS airborne equipment. In this study, the MIMO system was verified by comparing and analyzing the outputs of reference tools. Additionally, the definition and derivation method of accuracy, integrity, continuity, and availability subject to MIMO were examined. The internal and external interfaces and functions were then designed and implemented. The GPS data pre-processing was minimized during the implementation to evaluate the navigation performance experienced by general users. Subsequently, tests and verification methods were used to compare the obtained results based on reference tools. The test was performed using the KASS dataset, which included GPS and SBAS observations. The decoding performance of the developed MIMO was identical to that of the reference tools. Additionally, the navigation performance was verified by confirming the similarity in trends. As MIMO is a component of KASS used for real-time monitoring of the navigation performance of SBAS, the KASS operator can identify whether an abnormality exists in the navigation performance in real-time. Moreover, the preliminary identification of the abnormal point during the post-processing of data can improve operational efficiency.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.4
• /
• pp.379-385
• /
• 2020

The satellite employs an adaptive beamformer to efficiently detect various signals and to suppress multiple interference signals, simultaneously. Although the adaptive beamforming satellite system needs Angle-of-Arrival (AOA) information of the desired signal, it is difficult to estimate the signal AOAs on the satellite environment. However, the AOA estimation on the ground control tower is more efficient and accurate comparing to the satellite environment. In this paper, we propose an adaptive beamforming satellite system based on the signal location information on the ground, consisting on an angle estimator, an adaptive beamformer, and signal processing & D/B unit. The ground control tower estimates the accurate location of the signal source, and it sends the estimated coordinates of the desired signal to the satellite. The angle estimator mounted on the satellite calculates the desired signal AOA, based on the signal location information transmitted from the ground control center. The satellite beamformer detects the desired signal and suppresses unwanted signals based on the signal AOA calculated by the angle estimator. We provide computer simulation results to present the performance of the proposed satellite adaptive beamforming system based on the signal location information.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.2
• /
• pp.171-178
• /
• 2008

Galileo is the Europe's global navigation satellite system corresponding to the GPS. The GIOVE-A test experiment has been finished and the second test satellite GIOVE-B will be launched soon. The integration of GPS and Galileo lead an increase of visible satellite number. We can obtain an improved navigation performance in signal blocked area such as urban or forest. GPS and Galileo have each time-coordinate system and use the different error model to calculate the navigation solution. In this paper, we studied on GPS and Galileo channel error model and time-coordinate system. Using this result, we implement the integrated navigation algorithm. In simulation, we analyzed the navigation error caused by time and coordinate disagreement and verified performance of integrated navigation algorithm in terms of visible satellite number, DOP(Dilution of Pression) and position error.

• Journal of Advanced Navigation Technology
• /
• v.19 no.1
• /
• pp.22-32
• /
• 2015

Ground based augmentation system (GBAS) is a next generation radio navigation aids to support precision approach of aircraft. Recently, airports installing GBAS and providing GBAS service are increasing all over the world. For the first time in Korea, SLS-4000 which is the GBAS ground equipment of Honeywell had been installed at Gimpo International Airport in 2013, and evaluated its functionality and performance of through the ground testing. This paper introduces a ground test and evaluation criteria on the CAT-I GBAS system, and describes testing methods for GBAS ground testing of Gimpo International Airport. In addition, detail testing methods and analysis results on major five of 12 ground test items are described.