• Journal of Positioning, Navigation, and Timing
• /
• v.13 no.1
• /
• pp.53-61
• /
• 2024

Global Navigation Satellite Systems are expected to meet system-defined integrity requirements when users utilize the system for safety critical applications. While the guaranteed integrity performance of GPS and Galileo is publicly available, their integrity assurance procedure and related methodology have not been released to the public in an official document format. This paper summarizes the integrity assurance procedures of Global Positioning System (GPS) and Galileo, which were utilized during their system development, through a literature survey of their integrity assurance methodology. GPS Block II assures system integrity using the following methods: continuous performance monitoring and maintenance on Space Segment (SS) and Control Segment (CS), through a cause and effect analysis of anomalies and a failure analysis. In GPS Block III, to achieve more stringent integrity performance, safety requirements are integrated into the system design and development from its starting phase to the final phase. Galileo's integrity performance is provided in the Integrity Support Message (ISM) format, as Galileo utilizes a Dual Frequency Multi Constellation (DFMC) Satellite Based Augmentation System (SBAS) and Advanced Receiver Autonomous Integrity Monitoring (ARAIM) to serve safety critical applications. The integrity performance of Galileo is ensured by using a methodology similar to GPS Block II (i.e. continuous performance monitoring and maintenance on the system). The integrity assurance procedures reviewed in this paper can be utilized for a new satellite navigation system that will be developed in the near future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.3
• /
• pp.259-265
• /
• 2015

It is clearly understood that e-navigation is beneficial to prevent collision and grounding of ships. The purpose of this study is to define and present a future ship operation system under the e-navigation environment in order to provide clear direction for the design of Korean e-navigation system. The future ship operation system consists of shipboard navigational system, shore supporting system and maritime communication system. To achieve the objectives of this study, the ship operation system was discussed separately into SOLAS ships and non-SOLAS ships in this study. In SOLAS ships, mariners become a system manager, choosing system presets, interpreting system output, and monitoring vessel response. In small ships and fishing vessels, mariners may enjoy their navigation by using the automatic tracking of ship's position on the portable electronic chart display. The improved bridge design, integrated and harmonized navigational system and single window reporting will reduce significantly the administrative and physical workload of mariners. Mariners can concentrate their attention more on navigational duty under the e-navigation environment. To build an effective Korean e-navigation system, the essential navigational functions and e-navigation services for small ships and fishing vessels must be identified and developed taking into account user needs.

• Journal of Navigation and Port Research
• /
• v.41 no.5
• /
• pp.277-286
• /
• 2017

IMO introduced e-Navigation concept to improve the efficiency of ship operation, port operation, and ship navigation technology. IMO proposed sixteen MSPs (Maritime Service Portfolio) applicable to the ships and onshore in case of e-Navigation implementation. In order to meet the demands of the international society, the system implementation work for the Korean e-Navigation has been specified. The Korean e-Navigation system has five service categories: the S2 service category, which is a ship anomaly monitoring service, is a service that classifies emergency levels according to the degree of abnormal condition when a ship has an abnormality in ship operation, and provides guidance for emergency situations. The navigation safety module is a sub-module of the S2 service that determines the emergency level in case of navigation equipment malfunctioning, engine or steering gear failure during navigation. It provides emergency response guidance based on emergency level to the abnormal ship. If an abnormal condition occurs during the ship operation, first, the ship shall determine the emergency level, according to the degree of abnormality of the ship. Second, an emergency response guidance is generated based on the determined emergency level, and the guidance is transmitted to the ship, which helps the navigators prevent accidents and not to spread. In this study, the operational concept for the implementation of the Korean e-Navigation system is designed and the concept is focused on the navigation safety module of S2 service.

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.3
• /
• pp.145-156
• /
• 2016

A variety of methods for indoor positioning systems have been underway to ensure the safety of emergency rescuers who are working in dangerous situations such as fire fighters. However, since most systems display locations of rescue workers in two-dimension (2D)-based maps, it is difficult for a commander located in the outside to recognize locations of rescuers inside the building intuitively. An augmented reality (AR)-based indoor positioning monitoring system can display locations of rescuer inside the building that can be seen by commanders to help intuitive recognition of positioning. To monitor AR-based indoor positioning, it is necessary to have an estimation technique of line of sight vector of observers. In the present study, an estimation technique of a line of sight vector using ultra-wide band tranceiver installed inside the indoor to trace locations is presented.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.479-484
• /
• 2015

Network RTK is a precise positioning technique using carrier phase correction data from reference stations within the network, and is constantly being researched for improved performance. However, the study for the system accuracy has been performed but system integrity research has not been done as much as system accuracy, because network RTK has been mainly used on surveying for static or kinematic positioning. In this paper, adequate monitoring system for network RTK is designed as basis research for integrity monitoring on network RTK. To this, fault tree on network RTK is analyzed, and a countermeasure is prepared to detect and identify the each fault items. Based these algorithms, monitoring system to use on central processing facility is designed for network RTK service.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.23 no.4
• /
• pp.204-217
• /
• 2018

This study proposes a cost-effective method to monitor coastal environments using e-Navigation-implemented domestic and international ferries, and to analyze big data of records such as wind, temperature, salinity, waves, and currents that are gathered through e-Navigation system. First, we present the concept and architecture of e-Navigation operation system based on the General Information Center on Maritime Safety and Security. Then, the marine observation system that can be applied to ferries operating in our nation's territory is discussed. Analytical methods, such as spatio-temporal mixed effects model, ensemble method, and meshfree method, in handling real-time big data obtained by the e-Navigation observing system are then explained in detail. This study will support the implementation of the Korean e-Navigation project that focuses on the safety of small vessels such as coasters and fishing vessels.

• Journal of the Korean Institute of Navigation
• /
• v.25 no.3
• /
• pp.225-236
• /
• 2001

In the recent years, major ship registers have demanded improved safety on the hull stress of large bulk carriers which are on navigation or cargo handling in harbour. Under these circumstances, a system that monitors hull stress and ship condition is being more and more important. If efficient and appropriate navigational information is given, safety of navigation would be greatly improved. The major ship registers of the globe are investing a great effort on the development of a system that monitors the hull stress of ship. Using this system, information of hull stress and ship motion is given to the users and also the data is stored on the external data storage system simultaneously. Through this study, a software that monitors hull stress was developed. Not only can randomized input-data of the standard hardwares be applied to the system, but also this system can be operated on and applied to real hardware systems.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.5
• /
• pp.504-510
• /
• 2018

Marine casualties are caused mainly by collisions and grounding, due to human error. The SMART Navigation Service is preparing a measure to reduce marine casualties caused by human error and establish an LTE Accident Vulnerability Monitoring System (SV10) to evaluate the danger of collision or grounding for a vessel based on location information collected on land. This service will also share real-time vessel locations and danger information with related agencies to enable them to respond more quickly to accidents on land. In this study, statistical reports on marine casualties and investigation reports provided by the Korea Maritime Safety Tribunal are analyzed, so the percentage of marine casualties that could be reduced using the SV10 service could be identified.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.249-249
• /
• 2017

• Journal of Advanced Navigation Technology
• /
• v.28 no.2
• /
• pp.163-171
• /
• 2024

In the existing air traffic management (ATM) system, various types of safety alert features are provided based on trajectory data to ensure the safety of aircraft operations, along with aircraft position and detailed flight information. The urban air traffic management (UATM) system for urban air mobility (UAM) should also provide safety alert features to ensure the safety of UAM operations. Considering the operational environment of UAM, it is necessary that the safety alert features provided at least match or exceed those available in the existing ATM system. This study aims to present the safety alert features of the new UATM system that differ from those provided by the existing ATM system before introduction and commercialization of UAM. The study was conducted focusing on the safety alert features that should be provided in the event of a deviation from the UAM's path, and the establishment of the safety alert features was carried out in two parts: approach path monitor (APM), which is applied during the approach phase, and route adherence monitoring (RAM), which is applied during the cruise phase.