• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.1
• /
• pp.15-24
• /
• 2014

It is essential to understand the infrared signature of a naval ship to survive against various missile attacks under variable environmental conditions. As guided missiles are developing to equip more accurate IR seekers, research works for countermeasure and IR stealth technology are strongly required. But challenging works are continuously suggested for predicting and analyzing IR signal status of naval ships to achieve low observable performance under various weather conditions, variable missions and developing threats. In this study, overall guidelines of setting design criteria for low observable ships are proposed by considering varying environmental conditions including daily and seasonal variations. Test and evaluation criteria for newly constructed ships for target and background temperature difference is proposed as a design criteria which can be predicted by change of condition and ship's speed. Through the proposed techniques and procedures, it is expected to establish the measurement and evaluation criteria by using temperature, IR Signal differences between the ship and the background.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.4
• /
• pp.49-59
• /
• 2016

Naval combat system developed in-country is progressing at an alarming rate since 2000. ROK navy will be achieved all vessels that have combat system in the near future. The importance of System Engineering and Integrated Logistics Support based on reliability analysis is increasing. However, reliability analysis that everyone trusted and recognized is not enough and applied practically for development of Defense Acquisition Program. In particular, Existing Reliability Analysis is focusing on reliability index (Mean Time Between Failure (MTBF) etc.) for policy decision of defense improvement project. Most of the weapon system acquisition process applying in the exponential distribution simply persist unreality due to memoryless property. Critical failures are more important than simple faults to ship's operator. There are no confirmed cases of reliability analysis involved with critical failure that naval ship scheduler and operator concerned sensitively. Therefore, this study is focusing on Mean Time To Critical Failure (MTTCF), reliability on specific time and Operational Readiness Float (ORF) requirements related to critical failure of Patrol Killer Guided missile (PKG) combat system that is beginning of naval combat system developed in-country. Methods of analysis is applied parametric and non-parametric statistical techniques. It is compared to the estimates and proposed applications. The result of study shows that parametric and non-parametric estimators should be applied differently depending on purpose of utilization based on test of normality. For the first time, this study is offering Reliability of ROK Naval combat system to stakeholders involved with defense improvement project. Decision makers of defense improvement project have to active support and effort in this area for improvement of System Engineering.

• Journal of Korea Multimedia Society
• /
• v.15 no.12
• /
• pp.1506-1516
• /
• 2012

In a ship block logistics application, acquisition of locations is required in order to identify location of the ship blocks. A Smart device equipped with a GPS sensor can be used as a mobile client for a ship block logistics application. However the precision of GPS components on a commercial smart device is not high enough. Therefore, using the GPS for localization may produce significant positioning errors in a ship block logistics system. This paper proposes a method to reduce errors in measuring locations using a smart device. Based on the knowledge of how the location information is used in a ship block logistics application, and the predictability of the client's moving line based on geographical layout of a shipyard area, our proposed technique enables a better prediction of the ship blocks location. Performance evaluation shows that the proposed technique can significantly reduce the positional error.

• Journal of Ship and Ocean Technology
• /
• v.9 no.2
• /
• pp.1-10
• /
• 2005

A light-weight cantilever type towing carriage was devised and installed in the towing tank at Seoul National University. Wireless measurement devices were also provided for appropriate data acquisition during high-speed towing tests. With the new carriage system, a series of model tests were performed to investigate the hydrodynamic characteristics of the racing boat in the towing tank and the resistance test results had sufficient accuracy so that they could be used in the development of a high speed planning hull.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.1
• /
• pp.113-119
• /
• 2014

Recently, R.O.K. Navy is increasing re-usability of design data and application of M&S(Modeling and Simulation) through the establishment of collaborative product development environment focused on Naval Ship Product Model(NSPM). As a result, the reliability of the result of design is getting better, and furthermore, a study to improve quality of construction through simulation of production/operation is in progress. Accordingly, the database construction of design data and the DB(Database) quality become important, but there was not research related to those or it was just initial state. This paper conducted research about system of the quality verification process of shape elements which compose NSPM based on the quality verification guideline of NSPM as the result of the precedent study. The hull surface was limited as verification object. The study to verify two things that application of basic drawing by the cad model of hull surface, and whether there is error in the geometric quality of cad model was progressed. To achieve this goal, the verification criteria and algorithm were defined and the prototype system which is based on was developed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.1 no.2
• /
• pp.70-77
• /
• 2009

Today, many middle-sized shipbuilding companies in Korea are experiencing strong competition from shipbuilding companies in other nations. This competition is particularly affecting small- and middle-sized shipyards, rather than the major shipyards that have their own support systems and development capabilities. The acquisition of techniques that would enable maximization of production efficiency and minimization of the gap between planning and execution would increase the competitiveness of small- and middle-sized Korean shipyards. In this paper, research on a simulation-based support system for ship production management, which can be applied to the shipbuilding processes of middle-sized shipbuilding companies, is presented. The simulation research includes layout optimization, load balancing, work stage operation planning, block logistics, and integrated material management. Each item is integrated into a network system with a value chain that includes all shipbuilding processes.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.522-525
• /
• 2011

지금까지 제조업에서는 CAx(CAD, CAE, CAM) 시스템을 중심으로 설계와 생산의 효율성 증대를 이뤄왔다. 최근에는 제품을 중심으로 PLM(Product Lifecycle Management), 디지털 메뉴팩처링(Digital Manufacturing) 등의 개념을 도임하고 있으며, 이를 기반으로 설계와 생산의 효율성 증대뿐만 아니라, 디지털 제품을 중심으로 하는 제품 개발환경 구축을 통해 제조업의 불변과제 해결과 경쟁력 확보를 위해 노력하고 있다. 본 논문에서는 함정 설계와 정보 관리를 위한 프로세스 및 프레임워크 연구를 수행한다. 그리고 함정획득에 SBA 개념을 적용하기 위한 인프라스트럭쳐에 대해 연구를 수행한다. 객체 지향 개발방법론의 요구사항 분석법에 기반을 둔 SBA(Simulation-Based Acquisition) 프레임워크 정의 방법론을 정립하고 이를 바탕으로 3 차원 함정제품모델 중심의 획득업무 분석을 통해 SBA-NS 아키텍처와 함정제품정보(NSPI : Naval Ship Product Information) 참조모델을 정의하고자 한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.6
• /
• pp.657-665
• /
• 2007

The object of this paper is to describe the ubiquitous computing technologies for ship, which is produced and assembled by many steel blocks. It includes the testing of a 2.4GHz wireless communications platforms and radio-frequency identification technology with the blocks disturbing the wireless communication. The power line communication that is established in a ship already is also experimented for some data transfer. Also, possible application areas of the ubiquitous computing technology to ships are discussed. At last, the test bed copied from an actual vessel was installed and data acquisition tests were established using wire and wireless communication. In this paper, we implemented some ubiquitous computing technologies in the test bed simulating a ship environment and investigated the basic characteristics of ubiquitous computing technologies.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.3
• /
• pp.13-19
• /
• 2012

Recently, as the importance of the interior noise in a ship cabin has risen, ship builders have becomeconcerned about the use of noise reduction panels to reduce cabin noise. The results of previous researches have been based on analytical and experimental methods using simple sandwich panels. However, panel structures are becoming more complex to improve the transmission loss. Thus, researches that analyze the transmission loss of a panel are reaching the limit of study. This paper reports on research that was performed to determine the sound transmission characteristics of multi-complex panels applicable to high value-added vessels. It presents comparisons between analytical methods and experimental results by using a mini-reverberant chamber with components of sound attenuation panels, including the core and surface materials. The sound transmission loss of multi-complex panels are also analyzed in terms of the influences of the inside perforate plates and air gap thickness on the attenuation. Finally, the multi-complex panel with the highest noise attenuation is proposed based on the analysis results and experimental results in mini-reverberant chamber, which wereverified using a real-size reverberant chamber.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.91-99
• /
• 2019

Naval Ships have a number of requirements related to performance. Naval ship acquisition takes a long time from initial planning to delivery, and various products such as drawings and reports are created. In complex systems, such as naval ships, it is difficult to maintain the required traceability through these outputs. The basic design of the ship is an important step to determine the specifications, performance, and equipment of the ship. It is necessary to apply the systematic requirements management process. The basic design manages the requirements in accordance with the systems engineering-based technical review process, but the actual system architecture design process is not presented. The traceability between the requirements and the functional and physical architectures of components is unclear. This paper examined how to design the system architecture required for specification and system design, and the design results were verified using SE-based technical review process for requirements management. A step-by-step process for designing a submarine system architecture is presented and verified using the SE technical review. This facilitates the specification of the requirements and system architecture design, and supports traceability management and verification of the requirements. The proposed process can be applied in various ships including submarines.