• Strategy21
• /
• s.39
• /
• pp.140-162
• /
• 2016

The construction of Jeju Naval Base was finally completed and donated to the Republic of Korea Navy on February 26th this year. There is no doubt that the new base will contribute to the substantial augmentation of Korea's naval power and maritime security. However, we should note that the new naval base took a long and hard twenty-three years to be completed. In the 21st century, Korea should adopt a new strategy that can fulfill the security requirements of Korea for the new age of international relations. The 21st century is characterized by globalization, and in the world of globalization, a national boarder has become meaningless. In the late 20th century, after the Cold War, trade between countries have greatly increased and so did the importance of the seas. Having transformed from an agricultural country into a commercial country, Korea went from a continental state to a maritime state. Korea has become the 9th largest trading state, and obviously, the importance of the sea has become significant. Korea's national strategic focus needs to be on the sea for national survival. Thus, since the 1990s, the Korean Navy has planned to build the Jeju Naval Base. Jeju, due to its geopolitical characteristics, is extremely important to the 21st century Korea's economy and national security. Jeju is the starting point of the sea route that reaches out to the world, and at the same time, the ending point of the sea route that heads towards Korea. Jeju is located in the center of Northeast Asia and thus, Jeju Naval Base is extremely important for the area's security and order. Jeju Naval Base will be very useful not only for the maritime security of Korea, but also for keeping peace and order in Northeast Asia. Jeju Naval Base was the minimal effort against the six sea route security threats towards Korea. The six sea route threats are: 1) Threat from North Korea; 2) China's Threat towards Korea's sovereignty; 3) China's treat towards Korea's fishery; 4) Threat from Japan; 5) Threat towards Korea's sea routes; 6) Threat from recent phenomena of isolationism of the United States. Jeju Naval Base is built for both warships and civilian ships--such as cruise ships--to use. Just like the United States' Pearl Harbor, Jeju Naval Base will become not only the largest military base, but a beautiful tourist site.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.32 no.2
• /
• pp.14-17
• /
• 1995

IBS는 운용술에서 승조원과 기계장치간의 역할 분담을 보고 또는 재평가할 지원 계통을 통해 효과적인 제 기능을 할 수 있게 Sensor base, 예측 base 및 유도 base에 기준을 둔 운용술을 목표로 하고 있다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.3
• /
• pp.241-255
• /
• 2012

Three types of 100 kW-class tidal stream turbines are proposed and their performance is studied both numerically and experimentally. Following a wind turbine design procedure, a base blade is derived and two additional blades are newly designed focusing more on efficiency and cavitation. For the three designed turbines, a CFD is performed by using FLUENT. The calculations predict that the newly designed turbines perform better than the base turbine and the tip vortex can be reduced with additional efficiency increase by adopting a tip rake. The performance of the turbines is tested in a towing tank with 700 mm models. The scale problem is carefully investigated and the measurements are compared with the CFD results. All the prediction from the CFD is supported by the model experiment with some quantitative discrepancy. The maximum efficiencies are 0.49 (CFD) and 0.45 (experiment) at TSR 5.17 for the turbine with a tip rake.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.2
• /
• pp.858-864
• /
• 2019

The increasing demands of lifting lugs can be attributed to the rapid advancement of shipbuilding and offshore-structure production technologies and an exponential increase in the size of the block units of ship structures. Therefore, to ensure safety during the transportation and turnover of large blocks, it is important to determine the structural integrity and position of lifting lugs. However, because the manufacturing cost and availability of lugs are important considerations, low cost and easily obtainable steel compositions of grades different from those of the blocks are often used as alternatives. The purpose of this study is to investigate the effect of a lifting-lug metal on the physical properties of a base metal in a dissimilar welding between the base metal and lifting lug. The effect was evaluated by observing the metal microstructures and determining the hardness and dilution values on the cross-sectional surface of the lifting lug. According to the results of the metal microstructures, impact, hardness, and emission spectrochemical analysis at the surface from where the lug was removed confirmed that the chemical composition of the lifting-lug metal did not influence the physical properties of the base metal.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.50 no.2
• /
• pp.17-19
• /
• 2013

조선소에서 현재 활용하고 있는 생산계획시스템, 실행계획 시스템 및 안전관리시스템 등은 Web Base 혹은 Client Server Base application으로 구현이 되어 있다. 이러한 시스템들은 계획과 현장 상황의 불일치, 현장 돌발 상황에 대한 시스템적 해결 방안 부재, 현장 담당자 Know-how에 의한 작업 절차 변경 반영의 어려움과 같은 더 생산적일 수 있는 부분에 대한 대처가 부족하다는 것에 대한 해결 방안으로 Mobile 기반 클라우드 컴퓨팅을 활용한 조선 생산 실행 시스템에 대한 소개를 하려고 한다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.367-375
• /
• 2020

This paper presents an integrated analysis about dynamic performance of a Floating Offshore Wind Turbine (FOWT) OC4 DeepCwind with semi-submersible platform under real sea environment. The emphasis of this paper is to investigate how the wave mean drift force and slow-drift wave excitation load (Quadratic transfer function, namely QTF) influence the platform motions, mooring line tension and tower base bending moments. Second order potential theory is being used for computing linear and nonlinear wave effects, including first order wave force, mean drift force and slow-drift excitation loads. Morison model is utilized to account the viscous effect from fluid. This approach considers floating wind turbine as an integrated coupled system. Two time-domain solvers, SIMA (SIMO/RIFLEX/AERODYN) and FAST are being chosen to analyze the global response of the integrated coupled system under small, moderate and severe sea condition. Results show that second order mean drift force and slow-drift force will drift the floater away along wave propagation direction. At the same time, slow-drift force has larger effect than mean drift force. Also tension of the mooring line at fairlead and tower base loads are increased accordingly in all sea conditions under investigation.

• International conference on construction engineering and project management
• /
• 2017.10a
• /
• pp.291-296
• /
• 2017

Infrastructure development as national project suffers from social conflict which is one of main risk to be managed. Social conflicts have a negative impact on not only the social integration but also the national economy as they require enormous social costs to be solved. Against this backdrop, this study analyzes social conflict using articles published by online news media based on web-crawling and natural language processing (NLP) techniques. As an illustrative case, the Jeju Naval Base (JNB) project which is one of representative conflict case in South Korea is analyzed. Total of 21,788 articles and representative keywords are identified annually. Additionally, comparative analysis is conducted between the extracted keywords and actual events occurred during the project. The authors explain actual events in the JNB project based on the extracted words by the year. This study contributes to analyze social conflict and to extract meaningful information from unstructured data.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.4
• /
• pp.1197-1208
• /
• 2014

The problem of the oblique water entry of a three dimensional body is considered. Wagner theory is the theoretical framework. Applications are discussed for an elliptic paraboloid entering an initially flat free surface. A dedicated experimental campaign yields a data base for comparisons. In the present analysis, pressure, force and dynamics of the wetted surface expansion are assessed.

• Journal of Ship and Ocean Technology
• /
• v.11 no.1
• /
• pp.36-46
• /
• 2007

The maintenance of a ship is essential for safe navigation and hence regular surveys are prescribed according to the rule of classification societies. A hull inspection is generally performed by professional divers, but it takes a long time and the efficiency is low in terms of time and cost. In this research, a ROV(Remotely Operated Vehicle) named as SNU-ROV(Seoul National University-ROV) is developed to replace the conventional inspection method. In this system, the ROV is intended to be used for inspecting ship and harbor because harbor inspection is merging as a safety measure against any possible terror actions. In order to increase the efficiency of inspection, the ROV must be able to measure the exact position of damages. SNU-ROV has a positioning system based on LBL(Long Base Line). In shallow water such as harbor, however, LBL has bad DOP(Dilution of Precision) in the depth direction due to the limited depth. Thus LBL only can not locate the exact depth position. To solve the DOP problem, a pressure sensor is introduced to LBL and a complementary filter is attached by using indirect feedback Kalman filter. Thus developed positioning system is verified by simulation and experiment in towing tank.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.3
• /
• pp.241-248
• /
• 2015

A subsea pipeline for oil/gas transportation or gas injection is subjected to extreme variations in internal pressure and temperature, which can involve a strain rate effect on the pipeline material. This paper describes the flow stress characteristics of a pipeline material called API 5L X52N PSL2, using and experimental approach. High-speed tensile tests were carried out for two metal samples taken from the base and weld parts. The target temperature was 100℃, but two other temperature levels of –20℃and 0℃ were taken into account. Three strain rates were also considered for each temperature level: quasi static, 1/s, and 10/s. Flow stress data were proposed for each temperature level according to these strain rates. The dynamic hardening behaviors of the base and weld metals appeared to be nonlinear on the log-scale strain rate axis. A very high material constant value was required for the Cowper-Symonds constitutive equation to support the experimental results.