• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.4
• /
• pp.326-332
• /
• 1995

Using natural frequency measurement method, which is one of NDT method, natural frequency of the hot-rolled mild steel plate(specimen) under fatigue loading was measured. Between the degradation of the specimen under fatigue loading and the variation of the natural frequency of the specimen was investigated. As a result, the degradation of the specimen was described and monitored as variation of natural frequency of specimen. The natural frequency of specimen decreased gradually under fatigue loading. This means the variation of material properties of specimen. Especially. It means the variation of Young's modulus of specimen.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.746-751
• /
• 2003

When a cantilever beam rotates about the axis perpendicular to its longitudinal axis, its natural frequencies vary. This phenomenon which is caused by centrifugal inertia forces is often referred to as the stiffening effects. Since the variation of natural frequencies often creates critical problems for the rotating structures, it is necessary to control the variation of natural frequencies. As the cross section of a rotating cantilever beam varies, natural frequencies can be changed. The thickness and the width of the cantilever beam are assumed to be cubic spline functions in the present work. An optimization method is employed to find the optimal thickness and width of the rotating beam. This result can be used for the design of rotating structures such as turbine and helicopter blades.

• Journal of Aquaculture
• /
• v.10 no.4
• /
• pp.403-407
• /
• 1997

Intraspecific sequence variation was detected by polymerase chain reaction (PCR) and direct sequencing of a 350-nucleotide region of the mitochondrial 12S rRNA gene of two natural populations (Han River and Nakdong River) and one hatchery stock (Jinhae Inland Fisheries Institute) of local strain common carp, one Israeli strain of common carp stock from Pukyong National University (PKU), and one hybrid between Israeli strain of common carp female and local strain common carp male from PKU stock. There is little variation in 350 bases of the mitochondrial 12S rRNA gene sequences among 2 natural and 1 hatchery local strain common carp populatins, representing abut 7 to 20 nucleotide differences (less than 6%). The sequence of specimens from Han River was more similar to that from Nakdong River (identity=98.0%) than to that from Jinhae Inland Fisheries Institute (identity=96.3%). Sequence variation between Israeli strain and wild local strain common carp was higher than the variation within natural stocks. The level of variation was ranged from 15.7 to 17.7%. The hybrid showed very similar nucleotide4 sequence of 12S rRNA gene to the sequence of Israeli strain with the identity of 98.9%.

• Nuclear Engineering and Technology
• /
• v.33 no.4
• /
• pp.397-408
• /
• 2001

A marine reactor shows very different thermal-hydraulic characteristics compared to a land- based reactor. Especially, study on the variation of flow field due to ship motions such as inclination, heaving and rolling is essential since the flow variation has great influence on the reactor cooling capability. In this study, the natural circulation characteristics of integral type marine reactor with modular steam generators were analyzed using computational fluid dynamics code, CFX-4, for inclined conditions. The numerical analyses are performed using the results of natural circulation experiments for integral reactor which are already conducted at Seoul National University. From the results, it was found that the flow rate in the ascending steam generator cassettes increases due to buoyancy effect. Due to this flow variation, temperature difference occurs at the outlets of the each steam generator cassettes. which is mitigated through downcomer by thermal mixing. Also, around the upper pressure header the flow from descending hot leg goes up to the ascending steam generator cassettes due to large natural circulation driving force in ascending steam generator cassettes. From this result, the increase of How rate in the ascending steam generator cassettes could be understood qualitatively.

• Animal cells and systems
• /
• v.4 no.1
• /
• pp.23-30
• /
• 2000

Horizontal starch gel electrophoresis for 29 populations (n=543) of the wrinkled frog, Rana rugosa, from Korea and Japan was peformed to assess the degree of genic variation and genetic diversity, and to understand the biogeographic pattern of distribution and speciation. A sum of 22 presumptive loci was screened from 17 enzymes and general proteins. Four loci, Aco, Est-3, Me-2, and Pgm, demonstrated high levels of polymorphism. The degree of average genetic variation of R. rugosa was P=22.7% (9.1-40.9%), Ho=0.086 (0.048-0.165) and He=0.090 (0.042-0.168). In the south-eastern region of the Korean peninsula (Chongsong, Yongchon, Ulsan, Kyongju, Pohang, yongdok and Ulchin), a few unique alleles in the Mpi locus were detected and their biogeographic implications were considered. The degree of genetic differentiation among the Korean populations was moderate (S=0.900), whereas the degree of genetic diversity between Korean and Japanese populations was notably high (S=0.687, D=0.293). This result corresponds with the data obtained by the mitochondrial cytochrome b gene sequence (Lee et al., 1999) suggesting that the Korean and Japanese R. rugosa might have evolved a specific level of genetic differentiation since their geographic isolation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.140-140
• /
• 2022

Recently an accurate quantification of streamflow under various climatological and anthropogenic factors and separation of their relative contribution remains challenging, because variation in streamflow may result in hydrological disasters. In this study, we evaluated the factors responsible for variation in streamflow in Korean watersheds, quantified separately their contribution using different Budyko-based functions, and identified hydrological breakpoint points. After detecting that the hydrological break point in 1995 and time series were divided into natural period (1966-1995), and disturbed period (1996-2014). During the natural period variation in climate tended to increase change in streamflow. However, in the disturbed period both climate variation and anthropogenic activities tended to increase streamflow variation in the watershed. Subsequently, the findings acquired from different Budyko-based functions were observed sensitive to selection of function. The variation in streamflow was observed in the response of change in climatic parameters ranging 46 to 75% (average 60%). The effects of anthropogenic activities were observed less compared to climate variation accounts 25 to 54% (average 40%). Furthermore, the relative contribution was observed to be sensitive corresponding to Budyko-based functions utilized. Moreover, relative impacts of both factors have capability to enhance uncertainty in the management of water resources. Thus, this knowledge would be essential for the implementation of water management spatial and temporal scale to reduce the risk of hydrological disasters in the watershed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.366-375
• /
• 1991

In this study, vibrational behavior of uniform pipe carrying a moving medium is studied by using a transfer matrix and the displacement function derived from the conventional beam theory. In various boundary conditions, flow velocity and mechanical property change of the variation of natural frequency are investigated. The Coriolis term in the original differential equation of motion has been ignored in the investigation. This method is used to study the variation of natural frequency with flow velocity for clamped-clamped, cantilevered, clamped-pinned, pinned-pinned, free-free straight pipe element. It is shown that clamped-clamped, free-free pipe have the highest natural frequency and critical velocity values while cantilevered pipe have the smallest natural frequency for the same mechanical properties. From the vibration effects of mechanical property variation, it is shown that bending stiffness and pipe length variation has large influence on natural frequency and critical velocity. Since the order of transfer matrix is not changed with boundary conditions of pipe element, this method proposed can be easily applied to personal-computer for vibration analysis of pipe element. Furthermore, this method can be extended to three-dimensional system by using a coordinate transformation for the analysis of piping systems.

• Advances in nano research
• /
• v.14 no.5
• /
• pp.421-433
• /
• 2023

In the present paper, the influences of the variation of exponent of volume fraction of carbon nanotubes (CNTs) on the natural frequencies (NFs) of the carbon nanotube-reinforced composite (CNTRC) beams under four different boundary conditions (BCs) are investigated. The single-walled carbon nanotubes (SWCNTs) are assumed to be aligned and dispersed in a polymeric matrix with various reinforcing patterns, according to the variation of exponent of volume fraction of CNTs for functionally graded (FG) reinforcements. Besides, uniform distribution (UD) of reinforcement is also considered to analyze the influence of the non-linear (NL) variation of the reinforcement of CNTs. Using Hamilton's principle and third-order shear deformation theory (TSDT), the equations of motion of the CNTRC beam are derived. Under four different BCs, the resulting equations are solved analytically. To verify the present formulation, comparison investigations are conducted. To examine the impacts of several factors on the NFs of the CNTRC beams, numerical examples and some benchmark results are presented.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.613-618
• /
• 2000

It is well known that the rotating motion of a blade-like structure induces centrifugal inertia force that causes the variation of the natural frequencies of the structure. Even though most of blade-like structures can be successfully Idealized as beams, some behave like plates rather than beams. This paper presents a modeling method for the flapwise bending vibration analysis of rotating cantilever plates. The dependence of natural frequencies and free vibration modes on the angular speed as well as the aspect ratio of a rotating plate is investigated. Particularly. the natural frequency loci crossing is observed and discussed In the present study.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.349-354
• /
• 2001

A structure which is accelerated in the chordwise direction induces variation of the bending stiffness due to inertia force. Thus, the characteristic of natural vibration is also changed. This paper presents a modeling method for the vibration analysis of translationally accelerated cantilever plates. The dependence of natural frequencies and modes on the acceleration changes of the plate is investigated. Particularly, a natural frequency loci veering is observed and discussed in the present study.