• 보존과학연구
• /
• s.26
• /
• pp.165-188
• /
• 2005

From the ancient to these days, there have been used many kinds of pigment which have two types that are inorganic pigment and organic pigment. At the ancient times, natural pigment had been used but the artificially mixed pigment has been used in modern times. By the way, searching for studies has been studied recently, it would be said the ancient pigments such as Danchung, Wall painting and Mural painting are the mainthema. However, studies about the pigments used in modern pictured relics have rarely can be found. Therefore, this analysis of Ilweolokdo would be important at the point of the pigments used in pictures of royal family in modern times and the results can be briefly summarized as below; Firstly, the results of qualitative analysis of the pigments that base or all pigments of picture was detected components of Ca, Fe and As, this results meaning that picture was used filler and basic paint. Secondly, a result of the analysis on the composition elements of the pigments shows that the main components in their composition are ;White - Lead Cyanamide($2PbCO_3$.$Pb(OH)_2$) or Titanium Oxide($TiO_2$)Blue - Ultramarine($2(Na_2O$.$Al_2O_3$ .$2Si_O2$).$Na_2S_2$)Green - Emerald green($C_2H_3A_s3Cu_2O_8$)Gold - Gold(Au), Red-Red Lead($Pb_3O_4$) or Cinnabar(HgS)Black - Carbon(C)Thirdly, X-ray diffraction analysis of crystalline structure for the blue and green pigment peeling off in picture shows that the components of blue pigment is Ultramarine($2(Na_2O$.$Al_2O_3$ .$2Si_O2$).$Na_2S_2$) and green pigment is Emerald green($C_2H_3A_s3Cu_2O_8$). Especially, microcrystalline structure of the green pigment was the shape like a cross section of wood. Consequently, we knew through the analysis of qualitative and microcrystallinestructures seen on the cross section of analyzed pigments layer that the all pigments used in the Ilweoloakdo is possible to use synthetic pigments in modern.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.5
• /
• pp.821-826
• /
• 1998

Functional properties of mucilage and pigment extracted from Opuntia ficus-indica var. saboten were determined at various temperatures, pHs and alcohol concentrations. The crude mucilage extracted from pickly pear showed pH 4.2, 0.14% total acidity and 8.1% total soluble solid content(w/w, wet basis). Polysaccharide was purified from mucilage extract by isopropanol precipitation. Intrinsic viscosity of polysaccharide was 18.1dl/g and decreased with increasing KCl concentration. Relative viscosity and color stability of mucilage extract were determined with capillary viscometer and spectrophotometer at 534nm, respectively. In additions of 1~20%(v/v) ethanol, the red pigment of mucilage extract was very stable, but relative viscosity, increased gradually. For heating above 7$0^{\circ}C$, the stability of red pigment decreased drastically, but rheological property of mucilage was not changed. During storage, the red pigment was extremely unstable at above pH 8.3. At both pH 3.0 and pH 4.2, the red pigment was the most stable at 4$^{\circ}C$ for 18 days. In the case of storage at 37$^{\circ}C$, pigment of mucilage extract at pH 3.0 was destroyed more quickly than that at pH 4.2. Natural mucilage extract(pH 4.2) showed the good stability of red pigment at 3$0^{\circ}C$ for 10 days.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.292-298
• /
• 2018

In this study, Ascidian shell pigment was extracted, first using a 100.0 % ethanol solvent, proceeding with the dilution of it with DMSO (Dimethyl sulfoxide). The extracted pigment was evaluated to verify the stability. The absorbance of light have been evaluated according to pH levels and using the color-difference meter. As a result, it could be seen that absorbance and chromaticity ${\pm}a$ values were most stable at a pH level of 7.0 By keeping the sample at a pH level of 3.0, it could be observed that the absorbance and the chromaticity ${\pm}a$ values were decreased. Based on this observation, it can be deduced that the discoloration of the pigment can be prevented if kept at a neutral pH level. When antioxidants were added, the absorbance of the pigment increased, and the best effects could be seen in the ${\alpha}-tocopherol$ and glutathione samples.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.3
• /
• pp.230-234
• /
• 2006

In this study, we describe a one-step chemoenzymatic reaction for the production of natural blue pigments, in which the geniposide from Gardenia extracts is transformed by glycosidases to genipin. Genipin is then allowed to react with amino acids, thereby generating a natural blue pigment. The ${\beta}-glycosidases$, most notably Isolase (a variant of ${\beta}-glucanase$), recombinant ${\beta}-glycosidases$, Cellulase T, and amylases, were shown to hydrolyze geniposide to produce the desired pigments, whereas the ${\alpha}-glycosidases$ did not. Among the 20 tested amino acids, glycine and tyrosine were associated with the highest dye production yields. The optimal molar ratio of geniposide to glycine, two reactants relevant to pigment production, was unity The natural blue pigments produced in this study were used to dye cotton, silk, and wool. The color yields of the pigments were determined to be significantly higher than those of other natural dyes. Furthermore, the color fastness properties of these dyes were fairly good, even in the absence of mordant.

• Journal of the Korean Society of Costume
• /
• v.50 no.5
• /
• pp.131-142
• /
• 2000

The philological consideration of Korean Buddhist Monk's robe and its reviving have been investigated in traditional way. The configuration and colour of Korean Buddhist monk's robes have been properly adapted for an period, territory, and atmospheric phenomena. In case of Korea, introduced Buddhism from China realize modern robe from under the influence of fusion of Chinese ornament culture and Korean traditional ornament culture. As a result of this modern robe has been consisted of a Buddhist monk's robe and a cope. The modem robes has been significantly affected by industrialization, contrary to ancient time taxed robes as public imposts. At present be familiar in mass production we have a preference for the easier way in making and even color forming. In this paper it is focused on dyeing part, which recognized its important in latest time, at first declined according to appearance of chemical dye, evaluated its convenience in use. That is, it is increased natural dye, people begin with recognition of difference of physical properties for dress dyed with chemical pigment and that with natural pigment. In consequence, I have presented that both making colour of gray using traditional method, and three demolished-color prescribed by Buddhist law. Of course, though it become generally know that dyeing of robes occupied significant part of traditional natural dyeing. But in case of religion, it also is important to know symbolical meaning involved in its colour. Most of Buddhism-believers or even Buddhists who actually be dress in robe are without knowing the meaning of colour, or its revealing method. There, I have considered mating three colour of demolished- color included blue, black, and red, and also represented dyeing method of Buddhist monk's robe using both charcoal and ink-spick. From religious font of view, as robes contains involving of blessing, I have an intention of improvement way in dyeing and succession and development of traditional culture through consideration of traditional dyeing method. And I have also intended to restoration the value of robe's colour, disappeared by the time. moreover, I have shown that dyeing with natural pigment is profitable for both environment and sanitary aspect.

• The Korean Journal of Food And Nutrition
• /
• v.23 no.1
• /
• pp.23-29
• /
• 2010

Pigment concentrates with violet-red color and sweet taste were obtained from purple-fleshed sweet potato(PFSP) using ethyl alcohol and water. Extract from general potato(GP) were used as a control. The relative stability of PFSP pigment concentrate(PFSPPC) in a storage test over 15 days was confirmed in the order of dark > fluorescence > sun-light irradiation. The relative stability of GP pigment concentrate(GPPC) in a storage test over 15 days was confirmed in the order of sun-light > fluorescence > dark storage. The RRP of PFSPPC was higher than that of GPPC, but the color strength of GPPC was 1/2 that of PFSPPC. Treatment of PFSPPC with aluminum potassium sulfate(0.2~0.3%, w/w) best improved its stability. The improved RRPs of PFSPPC were 45.16~47.31% in sun light irradiation, 55.91~60.22% in fluorescence irradiation, and 76.34~75.97% in dark storage conditions. In substituting aluminum potassium sulfate for chitosan, an amount of 0.2~0.3%(w/w) was suitable, giving similar results in improving pigment stability for all concentrates tested. Also, freeze-dried PFSPPC powder was manufactured as a substitute for dextrin, and also as a substitute for chitosan to the extent of 0.25%(w/w). The results of storage stabilite for freeze-dried PFSPPC and GPPC powder over 15 days, irradiation were, PRRs of 74.47~89.36% and 61.54~76.92%, respectively. The stability improving effect of freeze dried PFSPPC powder was confirmed by the results of storage experiments at various conditions. The use of freeze-dried PFSPPC powder was therefore confirmed to be an effective treatment for general foods.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.357-366
• /
• 2017

Natural pigments are materials that express color and have been used in foods, cosmetics, medicine and so on. Since natural pigments are extracted from animals and plants, they are not uniform in size. Red pigments in particular are more lipophilic than other color pigments and tend to aggregate easily in aqueous solutions which make it difficult to reproduce the specific color due to size change. Found to be an allergen and the growing aversion for it to be used in foods, cochineal pigment, an animal pigment used for red pigments is being used less. In this study, red vegetable pigment lycopene extract and gardenia yellow was made uniform in size by ball-milling, then asymmetrical flow-field flow fractionation (AsFlFFF) and dynamic light scattering (DLS) were used to measure the size, and a color meter was used to confirm the color. Experimental results showed that the pigment particles were large in size and size distribution was wide before milling, but the size of the particles decreased and size distribution narrowed after milling. Color meter measurements showed that as the milling time increased, the size of the pigment particles decreased and the brightness, redness, and yellowness increased indicating a bright red color.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.2
• /
• pp.330-343
• /
• 1997

Extraoral maxillofacial prostheses are essential for restoring facial structures that are lost as a result of congenital missing, injuries from accidents, surgical treatments of head and neck cancer. Recently, silicone is the most useful material for this purpose and is more advantageous than other maxillofacial prosthetic materials. However, there are some problems for long-term usage of silicone prostheses due to tear and color change. These are major contributing environmental factors to those problems that are such as ultraviolet light, cleansing agents, changes in humidity and successive adhesion and removal. The aim of this study is to evaluate the physical properties and color changes of maxillofacial prosthetic silicone material by those environmental factors using A-2186 silicone material (Factor II, USA) and two pigments, cadmium yellow medium and cosmetic red. Aluminium molds were fabricated according to the ASTM No. D412 & D624 specifications and resulted specimens from molds were fabicated and treated as follows. Control group and experimental I group were fabricated with 0.1% wt. pigment mixing in silicone elastomer and II-1 group, II-2 group of experimental II group were fabricated with 0.2%, 0.3% wt. pigment mixing in silicone elastomer, respectively. Control group was kept in darkroom at room temperature, I-1 group was kept under natural sunlight during 1week, I-2 group was soaked in 20% soap water during 1wk. I-3 group was successively adhered and removed 200 times on inner region of arm using Daro adhesive-33. Experimental II groups were kept in darkroom at room temperature. Instron universal testing machine was used to measure the % elongation, tensile strength, tear strength of control, experimental I, II groups and reflectance spectrophotometer(COLOR EYE-3000, Macbeth, USA) was used to measure the color differences between control group and experimental I group. The results were as follows : 1. When compared with control group, natural weathering group and 20% soap-water soaking group had no significant differences in % elongation(p>0.05). 2. 200 times successive adhesion and removal group, 0.2% wt. pigment group and 0.3% wt. pigment group had significant decreases in % elongation(p<0.05). 3. Natural weathering group, 20% soap-water soaking group and 200 times successive adhesion and removal group had no significant differences in tensile strength (p>0.05). 4. 0.2%, 0.3% wt. pigment groups had significant decreases in tensile strength(p<0.05). 5. Values of all experimental groups were decreased in tear strength. and 200 times successive adhesion and removal group had significant decrease in tear strength(p<0.05). 6. Natural weathering group and 20% soap-water soaking group had significant color differences(${\Delta}E$) and it could be detectable to naked eye(p<0.05). 7. Color differences between control group and 200 times adhesion and removal group were not detectable to the naked eye (${\Delta}E<1.0$).

• Textile Coloration and Finishing
• /
• v.20 no.2
• /
• pp.59-65
• /
• 2008

The tannin acid and the enzymes have been used in order to improve the ruggedness in laundry and the absorption of dyes and pigments in the textile industry for several years. The enzyme processing on the protein fiber minimizes the damage of the entire fiber and improves the dyeability by effectively modifying only the hydrophobic surface. This study tried out the structural observation by applying the Castanea crenata sieb. et. zucc. containing abundant tannin to the hair dyeing as the natural dyeing pigment along with Protease of Rhizopus sp. The dyeability was improved as compared to the dyeing using only the synthetic tanning and iron mordant. When the depth of pigment was higher in accordance with the surface observation, the enzyme dissolution had impact on dyeing and so the keratin layer on the hair surface. Accordingly, it was found that the appropriate depth was between 0.01 and 0.03%. It was estimated that 0.1% protease would treated within 30min. Consequently, it would cause the good reaction with the functional group of tannin pigment.

• The Research Journal of the Costume Culture
• /
• v.22 no.2
• /
• pp.339-345
• /
• 2014

This study analyzes and compares Hanji made with loess to Hanji made with kaolin, two yellow-based inorganic pigments, in terms of its physical properties, optical properties, and color fastness to light with the aim of using it as a fashion material. Hanji made by adding inorganic pigments showed an approximately 20% retention ratio on average. This figure was similar to those of loess and kaolin. Physical properties were analyzed, with the following results. A higher amount of additives lowered the apparent density and increased thickness and bulk. In general, inorganic pigment-added Hanji had lower tensile strength, bursting strength, and folding endurance compared to non-additive Hanji. The analysis of optical properties showed a lower brightness index for Hanji made with inorganic pigments compared to non-additive Hanji. When comparing the two inorganic pigments, the brightness of Hanji made with kaolin was higher. Regarding color fastness to light, loess showed level 4 and kaolin showed level 5 when 25% inorganic pigments on pulp were added to Hanji. Thus, Hanji made by adding inorganic pigments during the manufacturing process may perform well as materials for fashion because the additives enhanced both the color fastness to light and the bulk while maintaining the strength. In addition, Hanji dyed with inorganic pigments may have the potential to serve as materials for the fashion industry while still retaining the characteristics of Hanji.