• Journal of Industrial Technology
• /
• v.14
• /
• pp.101-107
• /
• 1994

This study is to investigate harbor oscillation phenomenon according to combination of the wall structures by model experiment in a three dimensional wave basin. Six different types of wall combination were chosen through combination of erect wall, erect dissipation block, and sand beach, wave height at selected points in the harbor were measured by electronic wave gage. Test results show that the wall structure composed solely of erect walls showed generally highest harbor oscillation. Since natural beach shows lower reflection than erect dissipation block do, we thought it would be more efficient to use natural beach for improved harbor oscillation. The result showed, however, that the erect dissipation block are more efficient than natural beach to attain less harbor oscillation. The reason seens that the erect dissipation blocks have better capability to control breaking wave on the surface of the structure.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.3
• /
• pp.46-51
• /
• 2005

This study was to evaluate sorption and biodegradation rate affecting the natural dissipation of chlorinated volatile organic compounds (CVOCs) in surface soil. To show the effect of sorption and biodegradation on the natural dissipation of 1,1,1-trichloroethane (TCA), trichloroethylene (TCE) and tetrachloroethylene (PCE), three types of vial experiments were employed; (1) sterilized, (2) non-sterilized, (3) non-sterilized/substrate enriched. Also three moisture contents was applied to find the moisture effect in each vial; (1) wilting point (12%, w/w), (2) field capacity (29%, w/w), (3) saturation (48%, w/w). The results suggested that keeping the soil moisture content at field capacity was desirable for TCA and TCE natural dissipation in the vial study.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.11
• /
• pp.3072-3083
• /
• 1995

The numerical simulation on the three-dimensional natural convection heat transfer in the enclosure with heat generating chip is performed, and the effects of convective heat loss and vents are also examined. The effects of the Rayleigh number and outer Nusselt number (Nu$_{0}$) on the maximum chip temperature and the fractions of heat loss from the hot surfaces are investigated. The results show that conduction through the substrate is dominant in heat dissipation. With the increase of Rayleigh number, heat dissipation through the chip surfaces increases and heat loss through the substrate decreases. Maximum dimensionless temperature with vents is found to decrease about 40% compared to the one without vents at Nu$_{0}$=0.l. It is also shown that effects of size and location of the vents are negligible.ble.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.20 no.4
• /
• pp.309-332
• /
• 2016

Finite element method has been applied to solve the fundamental governing equations of natural convective, electrically conducting, incompressible fluid flow past an infinite vertical plate surrounded by porous medium in presence of thermal radiation, viscous dissipation, Soret and Dufour effects. In this research work, the results of coupled partial differential equations are found numerically by applying finite element technique. The sway of significant parameters such as Soret number, Dufour number, Grashof number for heat and mass transfer, Magnetic field parameter, Thermal radiation parameter, Permeability parameter on velocity, temperature and concentration evaluations in the boundary layer region are examined in detail and the results are shown in graphically. Furthermore, the effect of these parameters on local skin friction coefficient, local Nusselt number and Sherwood numbers is also investigated. A very good agreement is noticed between the present results and previous published works in some limiting cases.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.10a
• /
• pp.269-273
• /
• 2003

In this paper the HTS current lead for superconducting device is studied numerical method. The current lead is cooled by surrounded He gas by natural convection. To find wall heat flux, the linearization method is adopted Numerical results using natural convection cooling are compared with conventional cooling methods such as conduction cooling and vapor cooling. The results shows that the minimum heat dissipation is much smaller than conduction cooling. Also, the minimum heat dissipation is obtained for the non-zero gradient of temperature at warm end. HTS current lead operating current sharing mode is reduce heat flow to superconducting system.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.2
• /
• pp.134-137
• /
• 2014

BACKGROUND: Dissipation of herbicides in paddy water varies significantly, being dependent on environmental conditions such as sunlight. The photodegradation under natural sunlight may be one of natural degradation routes of herbicides dissipation. Therefore, the aim of this study was to monitor the degradation of butachlor and pyrazosulfuron-ethyl in paddy water under natural sunlight. METHODS AND RESULTS: The 12 water sample bottles of treatment were covered by quart glass plates, which allow about 90% of UV radiation (280-2000 nm) to pass through, to minimize the UV attenuation. The other 12 water sample bottles of the control were covered by glass lids and wrapped with aluminum foils to prevent the sunlight. The concentration of butachlor and pyrazosulfuron-ethyl in paddy water samples bottles was monitored under ambient conditions with and without natural sunlight. The concentration of butachlor and pyrazosulfuron-ethyl for treatment decreased from $355.3{\mu}g/L$ to $37.8{\mu}g/L$ and from $10.5{\mu}g/L$ to $3.9{\mu}g/L$, respectively, during consecutive 21 days after herbicide application under natural sunlight. CONCLUSION: The concentration of butachlor in paddy water decreased quickly under ambient conditions with natural sunlight. The degradation of butachlor in paddy water was enhanced by the natural sunlight. However, the degradation of pyrazosulfuron-ethyl was insignificant under natural sunlight.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1155-1160
• /
• 2008

In the present study investigated the heat dissipation characteristics of the natural convection type radiator by using the latent heat from a solid-liquid PCM(Phase Change Material). Total radiator volume size is $423{\times}295{\times}83\;mm$ and PCM tank size is $398{\times}270{\times}26\;mm$. The objective was elapsed time lower than maximum operating temperature. Experimental condition, in order to study the effects of the phase-change phenomenon, carried out the various mass flow rate, input electric power, and heat of fusion temperature of two type PCMs. For the above experimental conditions, the cooling performance by using the latent heat showed that heat absorption rate performs for about 3 hours from using PCM $38^{\circ}C$. However, cooling performance by using PCM $50^{\circ}C$ showed higher than surface temperature of heater block because of heat of fusion.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.1
• /
• pp.165-174
• /
• 2004

This research develops a technique which uses energy dissipation ratio in order to monitor the structural health on real time basis. For real-time monitoring, we employ the NExT and the ERA which enable us to obtain real-time data. Energy dissipation ratio is calculated from those data only with the damping and natural frequency of the structure, and from the calculated values we develop an algorithm (Energy dissipation method) which decides the damage degree of structure. The Energy dissipation method developed in this research is proved to be valid by comparison with other methods like the eigenparameter method and the MAC. Especially this method enables us to save measuring time and data which are the most important in real-time monitoring, and its use of the ambient vibration also makes it easy to monitor the whole structure and its damage points.

• Korean Journal of Environmental Agriculture
• /
• v.39 no.4
• /
• pp.305-311
• /
• 2020

BACKGROUND: The healthy food trend has encouraged the consumption of natural products, including berries. This trend is expected to increase the strawberry consumption. There has been a concern about the exposure of pesticides approved for use on strawberry. In this study, the dissipation patterns of systemic and non-systemic pesticides were evaluated in strawberry under plastic-covered greenhouse conditions. METHODS AND RESULTS: Cyflumetofen and dimethomorph were applied on strawberry in the critical GAP (Good Agricultural Practices). Strawberries were harvested at 0, 1, 2, 3, 5, 7 and 10 days after final application of the pesticides. The analyses of the residual pesticides were performed by HPLC-DAD with C18 column. The limits of quantitation (LOQ) of cyflumetofen and dimethomorph were 0.04 and 0.02 mg/kg, respectively. The recovery of cyflumetofen and dimethomorph were 88.1 ~ 103.3% and 79.0 ~ 110.2% for the spiked two levels (LOQ and 10LOQ), respectively. The biological half-lives of cyflumetofen and dimethomorph werer 7.5 and 8.9 days, respectively. The dissipation rates in strawberry were calculated by the statistics method at a 95% confidence level. The distribution showed that pesticides with low log Pow were indicated by the decreased dissipation rate and pesticides with similar log Pow and low solubility also showed the decreased dissipation rate. CONCLUSION: The residues of cyflumetofen and dimethomorph in strawberry at time 0 after the final application were below the established MRL in Korea. The dissipation behavior of systemic and non-systemic pesticides in strawberry is affected by their log Pow and water solubility values.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1199-1200
• /
• 2010