• 한국농공학회지
• /
• 제8권1호
• /
• pp.1011-1034
• /
• 1966

This thesis is the final report which has long been studied by the author to obtain the design basis for various hydrological constructions with the specific system suitable to the natural environmental conditions in Korea. This report is divided into two parts: one is to estimate runoff volume from watersheds and the other to estimate the peak discharge for a single storm. According to the result of observed runoff record from watersheds, it is known that Kajiyama formula is useful instrument in estimating runoff volume from watersheds in this country. But it has been found that this formula shows us 20-30% less than the actual flow. Therefore, when wihed to bring a better result, the watershed characteristics coefficient in this formula, that is, f-value, should be corrected to 0.5-0.8. As for the method to estimate peak discharge from drainage basin, the author proposes to classify it in two ways; one is small size watershed and the other large size watershed. The maximum -flood discharge rate $Q_p$ and time to peak Pt obtained from the observed record on the small size watershed are compared by various methods and formulas which are based upon the modern hydrological knowledge. But it was fou.d that it. was not a satisfied result. Therefore, the author proposes. tocomputate $Q_p$, to present 4.0-5.0% for the total runoff volume ${\Sigma}Q$.${\Sigma}Q$ is computed under the assumption of 30mm 103s in watershed per day and to change the theoritical total flow volume to one hour dura tion total flow rate when design daily storm is given. Time to peak Pt is derived from three parameters which are u,w,k. These are computed by relationship between total runoff volume (ha-m unit)and $Q_p$. (C.M.S. unit). Finally, the author checked out these results obtained from 51 hydrographs and got a satisfied result. Therefore the author suggested the model of design dimensionless unit-hydrograph. And the author believes that this model will be much available at none runoff record river site. In the large size watersheds in Korea when the maximum discharge occurs, the effective rainfall is two consequtive stormy days. So the loss in watershed was assutned as 6Omm/2days,and the author proposed 3-hour-daration hydrograph flow distribution percentage. This distribution percentage will be sure to form the hydrograph coordinate.

• 디지털융복합연구
• /
• 제17권7호
• /
• pp.131-138
• /
• 2019

전 세계 전력 생산 에너지의 비율은 석탄이 40%, 천연가스 20%, 수력 16%, 원자력 15%, 석유 6%로 모두가 환경오염을 유발하는 에너지다. 또한 화석연료는 지구상에 자원의 편중이 심하기 때문에 가격과 공급면에서 심각한 문제를 야기한다. 이러한 문제로 화석 연료를 대체하게 될 차세대 친환경 에너지로써 태양광 에너지가 각광 받고 있다. 이에 본 연구에서는 국내 공단에 Test-Bed를 선정하여 수용가의 대응용 태양광 ESS 시스템 적용함에 있어 Peak-cut 운영을 위한 Charge Operation Plan과 Discharge Operation Plan 운영방안을 최대수요전력 감소 시뮬레이션을 통해 검증하고자 한다. 이를 위해 전력사용량이 가장 많은 11월부터 2월의 전력사용량을 선정하여 Charge/Discharge Logic을 적용했다. 본 논문에서 제시한 충전/방전 로직에 따른 시뮬레이션 결과, ESS Peak-cut 서비스 이후의 최대수요전력이 감소하였으며 Peak-target 전력의 50%로 감소함에 따라 계약전력 또한 감소함을 알 수 있다. 이를 통해 계약전력 감소는 해당 수용가의 기본 전력 값을 감소시켜, 경제적 우월성을 기대할 수 있을 뿐만 아니라 전기품질 향상 및 전력공급시스템의 안정화에도 기여할 수 있을 것으로 판단된다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.1661-1665
• /
• 2006

실제 자연하천은 사행의 외측과 내측에 따라서 하도의 단면형이 변화한다. 일반적으로 만곡부의 외측은 수심이 깊어지고, 내측은 얕게 된다. 사행에 따른 이러한 단면의 횡단적 변화는 베타분포에 의해서 설명될 수 있다. 본 연구의 흐름 모의는 주흐름과 이차류의 양상을 살피는 것을 주목적으로 하여, 3차원 수치모의 되었다. 흐름의 3차원 모의는 범용 프로그램인 FLOW-3D 모형을 이용하여 이루어졌으며, LES 방법을 사용하였다. 베타 분포를 이용한 자연수로의 횡단형에 모르타르, 자갈, 식생 등으로 하상이 피복되어 있는 상태를 가정하여 조고를 대입하고, 유량과 수위가 다른 조건에서 3차원 흐름모의를 실시하고, 그 결과를 이용하여 수로내의 주흐름도, 이차류의 형태 등을 정량적으로 분석하였다. 분석 결과, 수로에서의 주흐름은 만곡부의 정점을 약간 지난 지점에서 가장 만곡부 외측으로 치우치는 특성을 확인할 수 있었다. 이차류의 경우에는 흐름이 만곡부 외측 하상 근처에서 회전하고, 이 부근에서의 유속이 가장 큰 값을 나타냄을 확인할 수 있었다. 이를 통해 하상 및 저수호안의 재료가 만곡부 외측에서 침식되어 만곡부 내측에서 퇴적되는 현상을 이해할 수 있을 것으로 생각된다.

• Membrane and Water Treatment
• /
• 제9권1호
• /
• pp.17-21
• /
• 2018

A series of laboratory scale experiments were performed to investigate the feasibility of membrane separation technology for natural rubber (NR) wastewater treatment and reuse. Three types of spiral wound membranes were employed in the cross-flow experiments. The NR wastewater pretreated by sand filtration and cartridge filtration was forced to pass through the ultrafiltration (UF), nanofiltration (NF) and reverse osmosis (RO) membranes successively. The UF retentate, which containing abundant proteins, can be used to produce fertilizer, while the NF retentate is rich in quebrachitol and can be used to extract quebrachitol. The permeate produced by the RO module was reused in the NR processing. Furthermore, about 0.1wt% quebrachitol was extracted from the NR wastewater. Besides, the effluent quality treated by the membrane processes was much better than that of the biological treatment. Especially for total dissolved solids (TDS) and total phosphorus (T-P), the removal efficiency improved 53.11% and 49.83% respectively. In addition, the removal efficiencies of biological oxygen demand (BOD) and chemical oxygen demand (COD) exceeded 99%. The total nitrogen (T-N) and ammonia nitrogen (NH4-N) had approximately similar removal efficiency (93%). It was also found that there was a significant decrease in the T-P concentration in the effluent, the T-P was reduced from 200 mg/L to 0.34 mg/L. Generally, it was considered to be a challenging problem to solve for the biological processes. In brief, highly resource utilization and zero discharge was obtained by membrane separation system in the NR wastewater treatment.

• 한국지형학회지
• /
• 제19권4호
• /
• pp.13-25
• /
• 2012

본 연구의 목적은 사행하는 자연하천에서의 이차류 특성을 실험적으로 관측하는 것이다. 이를 위하여 사행도가 1.2인 실규모 실험수로에서 다양한 유량 및 수심조건을 재현하고 3차원 유속 및 수심측정을 수행하였다. 실험결과, 만곡부의 외측에서 최대 유속이 관측되는 강한 이차류의 특성이 관측되었다. 이는 수직벽을 가지는 소규모 실험실 실험의 결과와 다른 양상으로 자연하천의 형태에 가까운 1:2 하안과 넓은 수면폭을 가지는 본 연구의 실험시설이 보이는 특성으로 이해된다. 만곡부의 외측에 발생하는 최대유속은 직선부로 진행됨에 따라 유심선 근처로 이동하여 직선형 하도에서의 흐름특성과 유사한 형태로 변화하였다. 이와 함께 양안에 각각 회전류가 형성되어 2개의 이차류가 발생하는 현상 역시 관측되었다.

• Ocean and Polar Research
• /
• 제44권3호
• /
• pp.249-260
• /
• 2022

This mini review examines the habitat connectivity and effectiveness of Korean Marine Protected Areas (MPAs) in the Yellow Sea Large Marine Ecosystem (YSLME) region. We first reemphasize that the Korean region of the YSLME is a single ecosystem (ecoregion) given the biophysical distribution patterns. The MPAs within the YSLME contribute about 50% to the total MPAs in Korea, accounting for about 10% of the territorial sea waters of Korea and 20% of the waters of YSLME on the Korean side. By area, national parks account for nearly 45% of the MPAs, followed by the wetland protected areas at 25%, with other types of MPA comprising the remaining 30%. Large MPA (> 100 km²) is the dominant type of MPA, accounting for 90% of the total area. We find that MPAs in the region are connected physically and perhaps also genetically. However, the level of protection was found to be low, and a no-take zone is rarely implemented. In addition, interrupted freshwater discharge caused by river-mouth dams poses a major hindrance to the physical connectivity of the MPAs. Restoration of the river-mouth dams and strengthened regulation on MPAs, with further expansion of MPAs in line with the current development of post-2020 global biodiversity frameworks, should be priorities for better management of marine resources. The newly revised law incorporating the concept of "Marine Ecosystem Axis Management" would reinforce the processes, and their effectiveness together with overall management of MPAs in Korea should be evaluated by designing appropriate measurement tools.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.54-55
• /
• 2015

Increase of impervious areas due to expansion of housing area, commercial and business building of urban is resulting in property change of stormwater runoff. Also, rapid urbanization and heavy rain due to climate change lead to urban flood and debris flow damage. In 2010 and 2011, Seoul had experienced shocking flooding damages by heavy rain. All these have led to increased interest in applying LID and decentralized rainwater management as a means of urban hydrologic cycle restoration and Natural Disaster Prevention such as flooding and so on. Urban development is a cause of expansion of impervious area. It reduces infiltration of rain water and may increase runoff volume from storms. Low Impact Development (LID) methods is to mimic the predevelopment site hydrology by using site design techniques that store, infiltrate, evaporate, detain runoff, and reduction flooding. Use of these techniques helps to reduce off-site runoff and ensure adequate groundwater recharge. The contents of this paper include a hydrologic analysis on a site and an evaluation of flooding reduction effect of LID practice facilities planned on the site. The region of this Case study is LID Rainwater Management Demonstration District in A-new town and P-new town, Korea. LID Practice facilities were designed on the area of rainwater management demonstration district in new town. We performed analysis of reduction effect about flood discharge. SWMM5 has been developed as a model to analyze the hydrologic impacts of LID facilities. For this study, we used weather data for around 38 years from January 1973 to August 2014 collected from the new town City Observatory near the district. Using the weather data, we performed continuous simulation of urban runoff in order to analyze impacts on the Stream from the development of the district and the installation of LID facilities. This is a new approach to stormwater management system which is different from existing end-of-pipe type management system. We suggest that LID should be discussed as a efficient method of urban disasters and climate change control in future land use, sewer and stormwater management planning.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.205-210
• /
• 2002

As the deposits of natural sands have slowly been depleted, it has resulted in an increase in manufactured fine aggregate (MFA). Standard specifications for fine aggregate for concrete contained in KS F 2558 permit a maximum of 7 percent finer than the No. 200 sieve (75${\mu}{\textrm}{m}$). Since the production process for MFA normally generates 10 to 20 percent of micro fines-which is defined as aggregates passing the No. 200 sieve (75${\mu}{\textrm}{m}$)-more than permitted by specifications, Excess fines must be removed by screening and/or washing operations. The amount of by-products will continue to grow as production increases with environmental discharge restrictions. This fundamental study focuses on experimental research for the adequacy of use of micro fines included in crushed aggregate using methylene blue test. Total of 63 types of sands from seven different rocks were tested. Based on the test results, the methylene blue test was turned out to be a good indicator of the quality of micro fines for concrete and a supplementary article and an amendment of the KS standard were recommended.

• 한국환경보건학회지
• /
• 제24권3호
• /
• pp.87-91
• /
• 1998

The removal effect of phosphate by sludge from wastewaters prior to discharge into natural waters is an essential measure to prevent eutrophication in receiving waters. There is need for developing low cost, easily and abundantly available, efficient adsorbents for the removal of phosphorus (P as orthophosphate) during the tertiary treatment of wastewaters. The adsorbent carbon which is prepared with fisheries wastes on a laboratory scale has been used to evaluate its performance for phosphate adsorption. Phosphate removal increase with increasing adsorbent dose and temperature, but shows no changes at an adsorbent dose over 8 g/l.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 합동춘계학술대회 논문집 전기물성,응용부문
• /
• pp.139-140
• /
• 2008

Cooling systems for electronic equipments are becoming more important. Cooling technologies using natural and forced convection are limited and operated in very low efficiency. A corona discharge is utilized as the driving mechanism for anair pump, which allows for airflow generation with low noise and no moving parts. However they do not enhance the flow rate and overcome the control mechanism of the pump. In this study a point-mesh type air pump, with a third electro de installed near the corona point, has been proposed and investigated by focusing on elevating the ionic wind velocity and power yield. As a result, the significantly enhanced ionic wind velocity and tremendously increased power yield can be obtained with the proposed air pump system.