• 한국소음진동공학회논문집
• /
• 제22권12호
• /
• pp.1157-1163
• /
• 2012

Natural frequency of a nano-resonator via nano transfer printing is studied. Through a nano transfer printing, the hybrid metal/polymer membrane may evolve a wrinkle. Natural frequency of a wrinkled hybrid membrane decreases significantly, as the amplitude to wavelength ratio becomes larger. To address the design limit of a hybrid nano resonator, we perform parametric study using finite element analysis. Specifically, we study the effects of the Young's modulus ratio of the metal/polymer membrane, thickness ratio and wrinkle amplitude to wavelength ratio, respectively. The results from the parametric studies can serve as guideline to design hybrid nano resonators.

• Structural Engineering and Mechanics
• /
• 제22권6호
• /
• pp.719-739
• /
• 2006

An analytical method for the free vibration of two circular plates coupled with an inviscid and compressible fluid is developed by the Rayleigh-Ritz method. The fluid is bounded by a rigid cylindrical vessel and two circular plates with an unequal thickness and diameter. It was found that the theoretical results could predict well the fluid-coupled natural frequencies with an excellent accuracy when compared with the finite element analysis results. As the fluid thickness increases or the plate thickness difference increases, an abrupt curve veering in the natural frequency loci of the neighboring modes and drastic changes in the corresponding mode shapes are observed. The mode localization frequently appears in the higher modes and in the wide gap between the plates because of a decrease in the fluid coupling owing to the fluid dispersion effect.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.131-137
• /
• 1996

To perform condition monitoring of P.C. Box girder bridge under ambient traffic, dynamic characteristics were identified using the results of load test an analysis. It was found that natural frequencies obtained from the measured acceleration data for the forced vibration part and free vibration part were nearly identical. Thus it can be concluded that dynamic parameters are properly determined under ambient traffic condition. Finite element model for analysis was calibrated using measured frequencies. Change of dynamic characteristics were predicted through analysis of the established finite element model with anticipated change.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.651-657
• /
• 2001

This article explains the theory of multiple mode/physical coordinate synthesis method in order to analyze the dynamic characteristics for an huge marine engine. The theory leads to make a simulation code. The natural frequencies obtained from the simulation code is compared to those from a commercial analysis software, ANSYS. The simulation code is well reviewed.

• 한국해안·해양공학회논문집
• /
• 제25권1호
• /
• pp.1-10
• /
• 2013

이 연구에서는 대형 항만시설물인 방파제 케이슨에 대한 진동특성 분석을 위한 충격진동시험 적용 결과를 분석하고, 그 결과를 유체-구조물-지반 상호작용을 고려한 수치해석 결과와 비교하여 수치해석 모델의 적용 가능성을 검토하였다. 천단고를 높이기 이전의 오륙도 방파제에 대한 실험결과와 최근 천단고를 높인 이후의 방파제에 대한 실험결과와 비교하여 천단고를 높임으로써 고유주파수가 1.7-4.3% 감소되었음을 알 수 있었고, 수치해석 결과에서도 고유주파수가 감소되는 것으로 분석되어 진동시험 및 수치해석의 합리성을 검증할 수 있었다.

• 콘크리트학회지
• /
• 제8권5호
• /
• pp.123-133
• /
• 1996

최근의 각종 사회시설의 확충에 따른 건설공사 및 교통시설 등은 많은 진동을 유발하여 사회적인 문제를 야기하고 있는 실정이다. 본 연구는 각종 제진재료를 이용하여 진동을 억제할 수 있는 콘크리트를 개발하여 각종 건설공사에서 흔히 발생할 수 있는 진동공해문제를 억제하고자 하며 아울러 폐기물의 재활용차원에서 폐자재를 이용하여 유용한 제진콘크리트를 개발하고자 하는데 그 목적이 있다. 우선, 제진재료를 이용한 압축강도 200kg/$\textrm{cm}^2$ 이상의 콘크리트 배합비를 찾기 위하여 Pilot실험을 수행하였으며, 선정된 적정배합비에 다른 진동시험제를 제작하여 재료의 동적특성 즉, 1차공명진동수, 동탄성계수 및 감쇠비를 측정하여 제진효과를 조사하였다. 제진재료로서는 Foam, Latex, Rubber Powder 그리고 Plastic Resin 등을 사용하였으며 진동의 감쇠효과가 있는 것으로 나타났다. 실험방법으로는 KS F 2437 규정과 진동파의 속도법을 사용하였으며, 감쇠비 측정은 Frequency Response Spectrum 곡선에 대한 Polynomial Curvefitting방법과 기하학적 해석방법을 이용하여 각각의 결과를 비교.분석하였다.

• 한국강구조학회 논문집
• /
• 제17권3호통권76호
• /
• pp.317-324
• /
• 2005

본 연구에서는 3경간연속 탄성지지된 복합슬래브교량을 특별직교이방성 판이론을 응용하여 해석하였다. 불균등단면이나 임의의 경계조건을 가진 보나 타워구조물의 고유진동수를 계산하는 방법을 탄성지지된 3경간 연속 복합슬래브교량에 적용하여 연구하였다. 슬래브 상판은 특별직교이방성 판으로 취급하였다. 진동해석에 필요한 변위의 영향계수는 여러 가지 방법으로 구할 수 있으나 본 논문에서는 유한차분법을 사용하였다. 또한 휨강성에 대한 영향과 기초의 탄성계수에 대한 영향에 대하여 연구하였다.

• Structural Engineering and Mechanics
• /
• 제68권1호
• /
• pp.103-119
• /
• 2018

In the present research, an attempt is made to obtain a semi analytical solution for both nonlinear natural frequency and forced vibration of embedded functionally graded double layered nanoplates with all edges simply supported based on nonlocal strain gradient elasticity theory. The interaction of van der Waals forces between adjacent layers is included. For modeling surrounding elastic medium, the nonlinear Winkler-Pasternak foundation model is employed. The governing partial differential equations have been derived based on the Mindlin plate theory utilizing the von Karman strain-displacement relations. Subsequently, using the Galerkin method, the governing equations sets are reduced to nonlinear ordinary differential equations. The semi analytical solution of the nonlinear natural frequencies using the homotopy analysis method and the exact solution of the nonlinear forced vibration through the Harmonic Balance method are then established. The results show that the length scale parameters give nonlinearity of the hardening type in frequency response curve and the increase in material length scale parameter causes to increase in maximum response amplitude, whereas the increase in nonlocal parameter causes to decrease in maximum response amplitude. Increasing the material length scale parameter increases the width of unstable region in the frequency response curve.

• Steel and Composite Structures
• /
• 제26권3호
• /
• pp.273-287
• /
• 2018

Buckling and free vibration analysis of sandwich micro plate (SMP) integrated with piezoelectric layers embedded in orthotropic Pasternak are investigated in this paper. The refined Zigzag theory (RZT) is taken into consideration to model the SMP. Four different types of functionally graded (FG) distribution through the thickness of the SMP core layer which is reinforced with single-wall carbon nanotubes (SWCNTs) are considered. The modified couple stress theory (MCST) is employed to capture the effects of small scale effects. The sandwich structure is exposed to a two dimensional magnetic field and also, piezoelectric layers are subjected to external applied voltages. In order to obtain governing equation, energy method as well as Hamilton's principle is applied. Based on an analytical solution the critical buckling loads and natural frequency are obtained. The effects of volume fraction of carbon nanotubes (CNTs), different distributions of CNTs, foundation stiffness parameters, magnetic and electric fields, small scale parameter and the thickness of piezoelectric layers on the both critical buckling loads and natural frequency of the SMP are examined. The obtained results demonstrate that the effects of volume fraction of CNTs play an important role in analyzing buckling and free vibration behavior of the SMP. Furthermore, the effects of magnetic and electric fields are remarkable on the mechanical responses of the system and cannot be neglected.

• Structural Engineering and Mechanics
• /
• 제37권6호
• /
• pp.593-615
• /
• 2011

This study determines the water length effects on the modal behavior of a prototype arch dam using Operational and Analytical Modal Analyses. Achievement of this purpose involves construction of a prototype arch dam-reservoir-foundation model under laboratory conditions. In the model, reservoir length was taken to be as much as three times the dam height. To determine the experimental dynamic characteristics of the arch dam using Operational Modal Analysis, ambient vibration tests were implemented for empty reservoir and three different reservoir water lengths. In the ambient vibration tests, the dam was vibrated by natural excitations provided from small impact effects and the response signals were measured using sensitive accelerometers. Operational Modal Analysis software process signals collected from the ambient vibration tests, and Enhanced Frequency Domain Decomposition and Stochastic Subspace Identification techniques estimated modal parameters of the dams. To validate the experimental results, 3D finite element model of the prototype arch dam was modeled by ANSYS software for empty reservoir and three different reservoir water lengths, and dynamic characteristics of each model were determined analytically. At the end of the study, experimentally and analytically identified dynamic characteristics compared to each other. Also, changes on the natural frequencies along to water length are plotted as graphs. Results suggest that reservoir water complicates the modal behavior of the arch dam significantly.