• 환경영향평가
• /
• 제20권6호
• /
• pp.857-866
• /
• 2011

This research categorized EIA target highways into following three types in order to minimize non-point source pollution from highway runoff. 1. Big drainage basin. 2. Small drainage basin. 3. Bridge section. The Natural, Filter and Swirl-Type devices were evaluated in terms of removal efficiency of TSS, BOD, COD, T-N, T-P, compatibility of site selection, economic feasibility, and maintenance convenience through which the final BMP was selected. According to the removal efficiency result, the area of Big and Small Drainage basin and bridge section had higher removal efficiency with natural facility than that of the Filter or Swirl-Type device. To make appropriate selection of highways'BMP for non-point source pollution, this study will aim to contribute to building more environmentally friendly highways by proposing the selection process that is made of 5 stages. 1. Selecting the target drainage basin. 2. Selecting the land for the mitigation facility. 3. Analysing the ease of maintenance. 4. Technically evaluating each installation. 5. Evaluating the effective implementation methods.

• 농촌계획
• /
• 제3권1호
• /
• pp.68-76
• /
• 1997

The purpose of this study is to suggest the spatial model which can be applied to the tourism farm plan. This study includes : (1) the analysis of existing facilities and activities of 22 tourism farms in Kyunggido and (2) the survey questionnaire about user's attitudes in 3 tourism farms. The results can be summarized as follows : 1) The .Major activities in the tourism farm are the resting/playing based on the natural environment and group meeting. 2) Average area is 17879.4uf (5418 坪). The most frequent facility is restaurant and lodge. 3) It is necessary to propose various types of tourism farm considering both natural conservation and development of rural region and users'various wants. The tourism farms are officially classified into four types Natural education type, Mind and body training type, Weekend farm type, Recreation type. 4) The space for tourism farm is divided into an area of production, and area of processing, and an area of convenience/recreation. 5) It is desired the convenience facilities are located in front of a farm, and the area of production is located at the back of a farm, and simple rest facilities are located all of the farm. 6) The weekend farm model and processing/convenient facility model are proposed in this study. Three types of the weekend farm models are proposed - simple type, composite type, and garden type. Three types of the processing/convenient models are proposed one building type, adjacent building type, and scattered building type.

• KIEAE Journal
• /
• 제11권6호
• /
• pp.71-79
• /
• 2011

There are high recognitions on the importance of comforts in Elderly living environment, but the circumstance is that studies on seniors facility space itself are approached only in planning level, and studies on lighting environment which is significantly associated with the comfort in the indoor environment of seniors where they actually spend the majority of their time are not that active. This study was intended to deduce cozy bedroom environment to which existing elderly care facility can be improved by using light shelf the lighting system with the advantage of being able to serve both as building sun visor and lighting window simultaneously in order to analyze the interior environment of bedroom space of elderly care facility the indoor space where the aged spend the majority of their life and examine the directions for the improvement of existing building lighting system through remodeling and renovation. In this study, lighting performance analysis was done in a way that the windows of the bedroom unit in existing facility were set in southbound direction based on two standard types and were put under initial simulation with the use of Autodesk Revit 2011, and after the simulation results were converted to Green Building Studio gbXML file to be used in ECOTECT, Daylight Autonomy a dynamic simulation and static natural lighting simulation the existing method of calculating daylight factors were deduced through Ecotect Analysis 2011. In conclusion, exiting standard model was found in such a condition that the daylight factors for both type A and type B were above 5% the proper standard value, and required improvement. In case light shelf the natural lighting system was attached, the daylight factor was improved to proper standard value for type A, and also was improved above existing facility for type B.

• 농촌계획
• /
• 제25권4호
• /
• pp.77-86
• /
• 2019

The purpose of this study is to survey and analyze the operating state and characteristics of domestic and foreign green care, prioritize the facilities and programs for green care introduction through expert survey of importance, and thereby to provide a basic material for introducing green care in facilities in Rural Development Project districts, including domestic rural experience facilities. Domestic and foreign literature was analyzed in order to classify the necessary facilities programs, of green care, and the analysis results were modified and supplemented through Expert Delphi Survey. Based on the results, AHP based importance survey was conducted. In terms of the facilities and programs for green care introduction, necessary facilities (H/W) were categorized into four types (accommodation facility, resting facility, experience facility, therapy facility) and S/W programs into three types (learning experience type, therapy type, and care type). To verify the reliability of the AHP based importance survey, Consistency Index (C.I.) was analyzed. As a result, the C.I. value of nine respondents ranged from 0.000 to 0.083 so that the survey was found to have high consistency. The importance of S/W programs was 0.627, and that of H/W facilities was 0.373. For green care introduction, programs were found to be more important. Regarding the categories of necessary facilities, therapy facility had the highest value, or 0.348; experience facility 0.253; accommodation facility 0.211; resting facility 0.188. Therefore, therapy facility and experience facility were found to be important. In case of S/W programs, therapy type had the highest value, or 0.499, and learning experience type (0.255) and care type (0.246) were similarly important. Generally, the categories that had high importance values tended to show a remarkable difference in importance of their sub categories. In particular, facilities or therapy programs using natural ecology and forests were found to be highly important. In conclusion, it is required to actively review the introduction of active programs using resources, such as existing experience facilities and accommodation facilities and villages forests, and programs making the body and soul comfortable, such as natural ecology experience, Green Shower, and horticulture activity.

• 한국철도학회논문집
• /
• 제9권4호
• /
• pp.335-342
• /
• 2006

Disaster management system should be built for minimizing damage factor that affects to construction facility from natural disaster. It could be classified by three categories such as disaster prevention, damage survey and recovery phases. For an integrated disaster management system, a disaster information classification system(DICS) is necessary for the reasonable disaster information management. This study suggests an integrated DICS that includes disaster type classification, facility type classification and information type classification for disaster management service. The applicability of suggested DICS is verified by railway facility and the research result could be used as a basic information system for national disaster management system.

• Steel and Composite Structures
• /
• 제8권3호
• /
• pp.243-264
• /
• 2008

This paper details a testing facility ("NATURAL FIRE FACILITY") that allows closely-controlled experimental testing on full-scale sub-frames while reproducing the spatially transient temperature conditions measured in real fires. Using this test facility, an experimental investigation of six steel sub-frames under a natural fire was carried out at the Department of Civil Engineering of the University of Coimbra. The main objective of these tests was to provide insight into the influence of these connection types on the behaviour of steel sub-structures under fire. The experimental layout is defined by two thermally insulated HEA300 columns and an unprotected IPE300 beam with 5.7 m span, supporting a composite concrete slab. Beam-to-column connections are representative of the most common joint type used on buildings: welded joints and extended, flush and partial depth plate. Finally, the available results are presented and discussed: evolution of the steel temperature; development of displacements and local deformations and failure modes on the joints zone.

• Nuclear Engineering and Technology
• /
• 제41권1호
• /
• pp.53-62
• /
• 2009

A set of experiments has been conducted on the performance sensitivity of the passive residual heat removal system (PRHRS) for an advanced integral type reactor, SMART, by using a high temperature and high pressure thermal-hydraulic test facility, the VISTA facility. In this paper the effects of the opening delay of the PRHRS bypass valves and the closing delay of the secondary system isolation valves, and the initial water level and the initial pressure of the compensating tank (CT) are investigated. During the reference test a stable flow occurs in a natural circulation loop that is composed of a steam generator secondary side, a secondary system, and a PRHRS; this is ascertained by a repetition test. When the PRHRS bypass valves are operated 10 seconds later than the secondary system isolation valves, the primary system is not properly cooled. When the secondary system isolation valves are operated 10 or 30 seconds later than the PRHRS bypass valves, the primary system is effectively cooled but the inventory of the PRHRS CT is drained earlier. As the initial water level of the CT is lowered to 16% of the full water level, the water is quickly drained and then nitrogen gas is introduced into the PRHRS, resulting in the deterioration of the PRHRS performance. When the initial pressure of the PRHRS is at 0.1MPa, the natural circulation is not performed properly. When the initial pressures of the PRHRS are 2.5 or 3.5 MPa, they show better performance than did the reference test.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.676-679
• /
• 2007

This paper describes an experiment facility to measure the circulation characteristics of a water/steam receiver at various heat fluxes. The natural circulation type receiver was considered in this study. The experiment facility was designed to satisfy circulation balance with an appropriate scale down. As a result, riser tube inner diameter was 7.4 mm and water circulation was 0.319 kg/s. Downcomer tube inner diameter by circulation balance was 9.52 mm and the quality was from 0 to 0.23.

• 한국조경학회지
• /
• 제39권5호
• /
• pp.48-56
• /
• 2011

본 연구는 국립공원 내부 혹은 경계에 연접하고 있는 집단시설지구 내의 건축물 층고 규제 기준을 정량화 된 합리적 높이 기준으로 개선하는데 목표를 두고 진행되었다. 전국 국립공원의 집단시설지구 건축물의 높이를 시뮬레이션함으로써 주요 조망점으로부터 건축물 상단을 지나는 조망선이 배후산지의 몇 부 능선까지 도달하는지를 분석하는 과정을 거쳤다. 분석 결과로 내륙의 산악형 국립공원 내부 혹은 경계에 입지하는 시설지구와 배후 산지가 있는 해안형 국립공원내의 시설지구의 경우, 3부 능선 보전을 목표로 하게 될 때 최대 허용 건축물 높이를 8.82m로 산정하는 것이 합리적이라는 결론을 얻을 수 있었다. 층수로 환산하면 3~3.5층 정도라고 할 수 있다. 이는 건축물 최대 허용 높이를 규정하는 것으로 랏지, 코티지 등을 제외한 호텔 등의 숙박시설에 적용하는 것이 바람직할 것으로 사료된다. 다만 해안해상형 중에서 배후 산지가 존재하지 않는 경우는 별도의 기준을 적용할 필요가 있다. 모든 집단시설지구에 동등한 일률적 기준을 적용하게 되면 지역 특성을 고려한 경관관리가 어렵다는 점과 조망점의 위치, 조망점 선정방법의 차이, 조망각도 차이 등의 변수에 따라 기준 적용 편차가 있을 수 있음을 고려하여야 한다. 향후 높이규정과 함께 각 지구별 경관계획에 의해 해당 지구의 자연환경에 적합한 차별화된 경관관리 전략이 필요하다.

• Nuclear Engineering and Technology
• /
• 제45권3호
• /
• pp.347-360
• /
• 2013

This paper presents an experimental investigation of the small-break loss-of-coolant accident (SBLOCA) and the loss-of-feedwater accident (LOFW) in a scaled integral test facility of REX-10. REX-10 is a small integral-type PWR in which the coolant flow is driven by natural circulation, and the RCS is pressurized by the steam-gas pressurizer. The postulated accidents of REX-10 include the system depressurization initiated by the break of a nitrogen injection line connected to the steam-gas pressurizer and the complete loss of normal feedwater flow by the malfunction of control systems. The integral effect tests on SBLOCA and LOFW are conducted at the REX-10 Test Facility (RTF), a full-height full-pressure facility with reduced power by 1/50. The SBLOCA experiment is initiated by opening a flow passage out of the pressurizer vessel, and the LOFW experiment begins with the termination of the feedwater supply into the helical-coil steam generator. The experimental results reveal that the RTF can assure sufficient cooldown capability with the simulated PRHRS flow during these DBAs. In particular, the RTF exhibits faster pressurization during the LOFW test when employing the steam-gas pressurizer than the steam pressurizer. This experimental study can provide unique data to validate the thermal-hydraulic analysis code for REX-10.