• 설비공학논문집
• /
• 제8권3호
• /
• pp.437-450
• /
• 1996

A set of stability equations is formulated for natural convection flows adjacent to a vertical isothermal surface melting in cold pure water. It takes account of the nonparallelism of the base flows. The melting rate is regarded as a blowing velocity at the ice surface. The numerical solutions of the linear stability equations which constitute a two-point boundary value problem are accurately obtained for various values of the density extremum parameter $R=(T_m-T_{\infty})/(T_0-T_{\infty})$ in the range $0.3{\leq}R{\leq}0.6$, by using a computer code COLNEW. The blowing effects on the base flow becomes more significant as ambient temperature ($T_{\infty}$) increases to $T_{\infty}=10^{\circ}C$. The maximum decrease of heat transfer rate is about 6.4 percent. The stability results show that the melting at surface causes the critical Grashof number $G^*$ and the maximum frequency of disturbances to decrease. In comparision with the results for the conventional parallel flow model, the nonparallel flow model has a higher critical Grashof number but has lower amplification rates of disturbances than does the parallel flow model. The spatial amplification contours exhibit that the selective frequency $B_0$ of the nonparallel flow model is higher than that of the parallel flow model and that the effects of melting are rather small. The present study also indicates that the selective frequency $B_0$ can be easily predicted by the value of the frequency parameter $B^*$ at $G^*$, which comes from the neutral stability results of the nonparallel flow model.

• 한국가구학회지
• /
• 제25권3호
• /
• pp.223-232
• /
• 2014

To make metalized wood composites of 10 different korean wood species, it was tested by Low temperature melting Bi-Sn alloy injection method at high temperature and high pressure condition. Metalized wood composite of each wood species had light ash color, but still maintained its own natural wood grain and wood figures. It was evaluated on coating properties. Furthermore, it also was check on effect of coating as like a changes of main color, wood grain and wood figures. The results of test were following as; a coating properties as like a cold resistance, heat resistance, acid resistance, alkali resistance, durability of abrasion, and cross-cut test was proper on the conditions of the KS standard. And, In aspect of color changes, the metalized wood composites of 10 different korean wood species had a light ash color, but still maintained its own natural wood grain and wood figures. Also, the more weight per gain of alloy is, the more grey background of metalized wood composite is.

• BMB Reports
• /
• 제37권6호
• /
• pp.657-662
• /
• 2004

Oligoribonucleotides containing 8-oxo-7,8-dihydroguanosine (8-oxoG) and 8-oxo-7,8-dihydro-2'-O-methylguanosine (8-oxoG-Me) were synthesized. The base pairing properties of 8-oxoG and 8-oxoG-Me in oligoribonucleotide in cDNA synthesis by reverse transcriptases were studied. dCMP was preferentially incorporated into the site opposite 8-oxoG or 8-oxoG-Me than into other dNMPs. TMP and dCMP were inserted preferentially into sites opposite 8-oxoG or 8-oxoG by reverse transcriptases. HIV-RT did not incorporate TMP, but RAV2-RT incorporated 50% more TMP than dCMP into the site opposite 8-oxoG. In the site opposite 8-oxoG-Me TMP was substantially incorporated by HIV-RT or RAV2-RT. Thermodynamic analysis of the DNA. RNA heteroduplex containing 8-oxoG revealed that 8-oxoG and 8-oxoG-Me formed base pairs with cytidine and thymidine with similar stability. The thermodynamic parameter (${\Delta}G^{\circ}$) demonstrated that the formation of duplexes between 8-oxoG or 8-oxoG-Me and cytidine or thymidine is more thermodynamically favorable than with adenosine and guanosine. However, differences in the melting temperature and ${\Delta}G^{\circ}$'s of 8-oxoG/dC and 8-oxoG/T were much smaller than between G/dC and G/T. CD spectra showed that DNA . RNA containing 8-oxoG or 8-oxoG-Me duplexes showed similarities between the A-type RNA and B-type DNA conformations.

• 한국결정성장학회지
• /
• 제17권6호
• /
• pp.272-276
• /
• 2007

생산성이 우수한 스컬용융법(Skull melting method)에 의해 다양한 색의 보석용 큐빅지르코니아(Cubic Zirconia) 단결정을 성장시켰다. 큐빅지르코니아 단결정은 굴절률, 분산, 경도가 다이아몬드와 유사하고 3d 전이원소, 4f 희토류원소를 첨가하여 다양한 색개발이 가능하므로 합성보석으로 대표적이다. 첨가제로는 $Pr_6O_{11},\;TiO_2,\;MnO_2,\;Er_2O_3$를 2가지 이상적정 혼합하여 성장시켰고, 색향상과 균일성을 위해 열처리를 병행하였다. 본 연구는 천연 유색보석인 페리도트, 연수정, 적색 투어멀린의 색재현에 그 목적이 있다.

• 한국생활과학회지
• /
• 제22권6호
• /
• pp.673-686
• /
• 2013

The purpose of this study is to identify consumer needs and sensory evaluation of jacquard fabrics for blind using low melting polyester. Ten kinds of jacquard fabric used for this study were developed. Developed jacquard fabrics were assessed subjectively by 164 consumers using 7-point scale of 22 consumer needs and 43 sensory descriptors. The results were briefly summarized as follows: the most important parameter to choose fabric for blind was 'Easy-use' and the other parameters are 'Lightproof', 'UV-protect', 'Design', 'Price', 'Color', 'Insulation', 'Easy-care'. The image sensibility of jacquard fabrics was explained by six factors: feminine, active, modern, traditional, pure, cozy. Higher preference was found in jacquard fabrics of clear, natural, luxurious, simple, feminine, young, cozy, graceful image. The preference was predicted 38.2% with feminine, modern, pure, cozy, traditional factors. Correlation coefficient between image sensibility factor 1 and preference was 0.437. The 3 factors (feminine, modern, pure)were selected as significant image sensibility affecting preference.

• 태양에너지
• /
• 제6권2호
• /
• pp.43-53
• /
• 1986

The objective of this study is to report on the characterics of convective flow and heat transfer during metling process in order to provide design information for thermal energy storage systems which use phase change material. In present study, flow and heat transfer characteristics of the Phase Change Material in the Open Top Model (O.T.M) and in the Closed Top Model (C.T.M) were studied numerically by the control volume formulation using the algebraic non-orthogonal coordinate transformation. For the calculation procedure, the physical properties of fluid are assumed to be constant except density which is linely dependent on temperature in the bouyancy term of momentum equations. At start of melting process, the thickness of melting layer is assumed from the Stefan Problem assumption. The heat transfer results of Open Top Model and Closed Top Model are compared with the parameters of Grashof number and aspect ratio. It was found that heat transfer phenomena in melted region was greatly affected by buoyancy-driven natural convection and the melting distance of Open Top Model at the upper region is greater than that of Closed Top Model.

• Design & Manufacturing
• /
• 제15권1호
• /
• pp.66-71
• /
• 2021

In this study, die turning injection(DTI) mold design for manufacturing reservoir fluid tanks used for cooling in-vehicle batteries, inverters, and motors was conducted based on multi-field CAE. Part design, performance evaluation, and mold design of the reservoir fluid tank was performed. The frequency response characteristics through modal and harmonic response analysis to satisfy the automotive performance test items for the designed part were examined. Analysis of re-melting characteristics and structural analysis of the driving part for designing the rotating die of the DTI mold were performed. Part design was possible when the natural frequency performance value of 32Hz or higher was satisfied through finite element analysis, and the temperature distribution and deformation characteristics of the part after injection molding were found through the first injection molding analysis. In addition, it can be seen that the temperature change of the primary part greatly influences the re-melting characteristics during the secondary injection. The minimum force for driving the turning die of the designed mold was calculated through structural analysis. Hydraulic system design was possible. Finally, a precise and efficient DTI mold design for the reservoir fluid tank was possible through presented multi-field CAE process.

• 태양에너지
• /
• 제19권2호
• /
• pp.29-36
• /
• 1999

Heat transfer characteristics of a low temperature latent heat storage system during the heat storage stage was examined for the circular finned tubes using fatty acid which shows the big density difference during melting as phase change materials. The heat storage vessel has the dimension of 530 mm height, 74 mm inside diameter and inner heat transfer tube is 480 mm in height and 13.5 mm outside diameter. Hot water was employed as the heat transfer fluid. During the heat storage stage, it was found that both conduction and natural convection were the major heat transfer mechanism. It was also found that the effect of natural convection on the heat transfer was more significant for the unfinned tube system than that for the finned tube system. The experimentally determined overall heat transfer coefficients were in the range of $50{\sim}250W/m^2K$ and the correlation for natural convection heat transfer as a function of Nusselt and Rayleigh number was proposed.

• 농업과학연구
• /
• 제37권3호
• /
• pp.457-464
• /
• 2010

The low melting alloy impregnated wood composites with natural grain of thinned Juglans mandshurica was made and evaluated in this study. And the proper manufacturing conditions was also investigated in this study. The low melting alloy with bismuth(Bi) and tin(Sn) which are harmless to humans, was applied for this novel composites, which showed not only no defects of discoloration, delamination, swelling, and cracking, because of high dimensional stability and low thickness swelling, but also much improved performance such as high bending strength, high hardness, low abrasion, high thermal conductivity as floor materials. This study also suggested the proper impregnating condition, such as 10 minutes of the preliminary vacuum time, $187^{\circ}C$ of the heating temperature and 10 minutes of the maintaining pressure time at the pressure of 30kgf/$cm^2$. The produced composites showed 9 times higher density for small specimen, 6.6 times for actual size sample and great increase in bending strength from 102.05N/$mm^2$ to 189.47N/$mm^2$ for small size sample and to 205.4N/$mm^2$ for actual size sample, also great increase in hardness from 15.1N/$mm^2$ to 73.38N/$mm^2$ for small size sample and 64.87N/$mm^2$ for actual size sample. And the composites demonstrated great decrease in abrasion depth and in water absorption.

• Bulletin of the Korean Chemical Society
• /
• 제29권4호
• /
• pp.879-881
• /
• 2008