• 제목/요약/키워드: Natural Circulation Flow

검색결과 156건 처리시간 0.027초

조밀화된 사용후 핵연료 저장조에서의 국부 비등에 관한 연구 (A Study on the Local Boiling of the Consolidated Spent Fuel Storage Pool)

  • Lee, Chang-Ju;Lee, Kun-Jai
    • Nuclear Engineering and Technology
    • /
    • 제25권1호
    • /
    • pp.8-19
    • /
    • 1993
  • 강제순환 냉각상실사고시 조밀화된 저장계통의 사용후 핵연료에서 생성된 붕괴열의 제거를 확인하기 위한 자연순환 해석모델이 개발되었다 채택된 수치기법은 ADI방법에 근거하였다. 사용후 핵연료의 붕괴열 생성율은 ANS-79 붕괴열 모델에 따라 계산되었으며, 보수적인 붕괴열 생성량 입력을 위해 chopped sine곡선에 따른 비균일 표면열속이 가정되었다. 저장조내 국부비등의 발생 가능성을 조사하기 위해서 민감도분석이 수행되었으며, 이는 핵연료간 거리 비, 열 생성량 및 핵연료 봉 반지름 등의 여러 변수를 변경시킴으로서 이루어졌다. 이 모델의 적용결과는 적절한 냉각시간 후의 조밀화된 사용후 핵연료 다발을 통한 자연대류 유량이 안전하고 효과적인 방식으로 저장조의 온도준위를 조절할 수 있음을 보여주고 있으며, 또한 사용후 핵연료봉 재배치를 위한 냉각시간에 관한 허용기준이 얻어졌다.

  • PDF

여의도 샛강 흐름 정체와 수질악화 원인 분석 (Analysis of the Causes of Flow Stagnation and Water Pollution in Yeouido Saetgang River)

  • 강형식
    • 대한토목학회논문집
    • /
    • 제39권1호
    • /
    • pp.25-32
    • /
    • 2019
  • 도시지역 샛강은 생물이 서식하기 어려운 도심지에 다양한 수변공간을 제공하여 생물다양성에 중요한 역할을 하며, 시민들에게는 휴식 및 체험 공간으로 활용되고 있다. 특히, 여의도 샛강은 국내 최초의 생태공원으로 조성되었으며, 서울 도심 중심에 흐르고 있어 장소적 희소성이 크고 생태적 가치가 매우 높다. 그러나 여의도 샛강은 조성 당시부터 수질 문제가 지속적으로 제기되어 오고 있어, 샛강 환경에 영향을 미치는 요소들과 그 원인에 대한 분석이 필요하다. 이에 본 연구에서는 여의도 샛강 흐름 정체와 수질 악화 원인을 분석하였다. 이를 위해 하천 측량 및 항공사진 분석을 통해 자연적인 물 순환이 어려운 원인에 대해 분석하고 고찰하였다. 한편, 여의도 샛강의 수질 모니터링 결과, 비가 오지 않는 평상시에는 BOD, T-P는 평균 III등급과 IV 등급 수준으로 나타났으며, 강우 시에는 BOD, T-P 모두 V~VI 등급인 것으로 나타났다. 또한 배수분구 분석을 통해 샛강 수질에 영향을 미치는 소유역을 선정하였으며, 결과에 대해 고찰하였다.

Impacts of wave and tidal forcing on 3D nearshore processes on natural beaches. Part I: Flow and turbulence fields

  • Bakhtyar, R.;Dastgheib, A.;Roelvink, D.;Barry, D.A.
    • Ocean Systems Engineering
    • /
    • 제6권1호
    • /
    • pp.23-60
    • /
    • 2016
  • The major objective of this study was to develop further understanding of 3D nearshore hydrodynamics under a variety of wave and tidal forcing conditions. The main tool used was a comprehensive 3D numerical model - combining the flow module of Delft3D with the WAVE solver of XBeach - of nearshore hydro- and morphodynamics that can simulate flow, sediment transport, and morphological evolution. Surf-swash zone hydrodynamics were modeled using the 3D Navier-Stokes equations, combined with various turbulence models (${\kappa}-{\varepsilon}$, ${\kappa}-L$, ATM and H-LES). Sediment transport and resulting foreshore profile changes were approximated using different sediment transport relations that consider both bed- and suspended-load transport of non-cohesive sediments. The numerical set-up was tested against field data, with good agreement found. Different numerical experiments under a range of bed characteristics and incident wave and tidal conditions were run to test the model's capability to reproduce 3D flow, wave propagation, sediment transport and morphodynamics in the nearshore at the field scale. The results were interpreted according to existing understanding of surf and swash zone processes. Our numerical experiments confirm that the angle between the crest line of the approaching wave and the shoreline defines the direction and strength of the longshore current, while the longshore current velocity varies across the nearshore zone. The model simulates the undertow, hydraulic cell and rip-current patterns generated by radiation stresses and longshore variability in wave heights. Numerical results show that a non-uniform seabed is crucial for generation of rip currents in the nearshore (when bed slope is uniform, rips are not generated). Increasing the wave height increases the peaks of eddy viscosity and TKE (turbulent kinetic energy), while increasing the tidal amplitude reduces these peaks. Wave and tide interaction has most striking effects on the foreshore profile with the formation of the intertidal bar. High values of eddy viscosity, TKE and wave set-up are spread offshore for coarser grain sizes. Beach profile steepness modifies the nearshore circulation pattern, significantly enhancing the vertical component of the flow. The local recirculation within the longshore current in the inshore region causes a transient offshore shift and strengthening of the longshore current. Overall, the analysis shows that, with reasonable hypotheses, it is possible to simulate the nearshore hydrodynamics subjected to oceanic forcing, consistent with existing understanding of this area. Part II of this work presents 3D nearshore morphodynamics induced by the tides and waves.

"황제내경(黃帝內經)"에 나타난 병(病)의 전변유형(傳變類型)에 관한 고찰(考察) (A Study on Transmission and Transmutation of Disease in "Hwangjenaegyeong(黃帝內經)")

  • 김종현;정창현;백유상
    • 대한한의학원전학회지
    • /
    • 제23권2호
    • /
    • pp.157-189
    • /
    • 2010
  • Many chapters of the Hwangjenaegyeong[HN] explain the process of transmission and transmutation of disease. The transmission and transmutation process in the HN can be categorized into one between the viscera and bowels, and another of the external pathogenic gi itself. The process between the viscera and bowels indicates the transport of the pathologic burden between each viscera and bowel. This again is categorized into three types. Interpromoting, intercontrolling and that by Saeng-yang(生陽), Sa-eum(死陰). Next, the transport of the pathogenic gi can be categorized into one moving inwards from the exterior according to personal traits, and that according to the three Eum and three Yang. Although there are numerous types of transmission and transmutation, there are two main criteria in understanding the process. First, whether the process is in accordance with the physiological or natural flow of the body. Interpromoting and three Eum three Yang processes are such examples. To follow the physiological flow of the body means to correspond to either the Heaven and Earth or the original physiology of the human body. Therefore, the disease progresses according to a certain date or season. This indicates a partial malfunction in the circulation of the vital energy, which is relatively easy to recover. In contrast, there are processes that go against the physiological flow, for example, intercontrolling transmission and transmutation. This process focuses on the movement of the pathogenic gi rather than the vital gi. The disease progresses regardless of the flow of the vital energy, and sequential functional damage occurs accordingly. Consequently, as the transmission and transmutation continue, formerly passed organs are left damaged, and the whole process is headed towards death. The second criteria for understanding the process is whether it is cyclic or not. To have a cyclic pattern means that the occurrence of a disease and the time of death is not fixed. Transmission and transmutation processes that have a cyclic pattern mostly follow the physiological flow of the body. As a result, they rarely end in deaths, and the process is centered on vital energy. On the other hand, those with acyclic patterns have a fixed occurrence and death point in the course of the disease. They are mostly unnatural processes, found in fatal acute diseases or consumption diseases.

자연환기 온실의 환기회수에 따른 포그냉방시스템의 냉방효과 (The Cooling Effect of Fog Cooling System as Affected by Air Exchange Rate in Natural Ventilation Greenhouse)

  • 김문기;김기성;권혁진
    • 생물환경조절학회지
    • /
    • 제10권1호
    • /
    • pp.10-14
    • /
    • 2001
  • 포그냉방시스템의 냉방효과는 온실 내부의 상대습도, 공기유동과 밀접한 관계가 있다. 냉방설계용 VETH선도에서 냉발효율은 환기회수의 증가와 그에 상응하는 분무수량의 증가로 인하여 개선될 수 있다. 시간제어방식을 이용한 무차광 실험온실에서 분당 환기회수가 평균 0.77회, 분무수량이 2,009g 일 때 온실 내부의 기온이 31$^{\circ}C$로 외부기온과 거의 같게 나타났으며, 이 때의 증발효율은 82%이다. 분당 환기회수가 평균 0.26회, 분무수량이 1.256g인 경우 무냉방 온실의 기온과 비슷한 37.1$^{\circ}C$였다. 차광율 70%인 실험온실의 분당 환기환수가 평균 2.59회, 분무수량이 2,009g 일 때, 내부의 상대습도는 증가하나 기온은 하강하지 못했다. 그러나 분당 환기회수가 평균 2.33회, 분무수량이 2,009g인 경우 내부의 기온이 31.4$^{\circ}C$로 이 때 온실의 유입구 풍속은 최고 1.9m.s$^{-1}$였다. 시간제어의 경우 일정간격으로 일정한 수량을 분무하기 때문에 분무입자가 모두 증발하지 못하고 온실 내부에 누적되어 온실 내부의 상대습도를 증가시켜 냉방효율을 감소 시키는 원인이 되고 차광망이 온실내부의 공기흐름을 차단하여 증발효율을 감소시키는 것으로 나타났다. 포그냉방시스템의 냉방효율을 높이기 위해서는 온실 내부의 상대습도에 의한 제어방식과 내부 공기의 순환에 대한 연구가 필요하다.

  • PDF

강제순환 방식의 공기가열식 태양열 집열기의 성능분석에 관한 수치해석 연구 (A Numerical Study on the Performance Analysis of a Solar Air Heating System with Forced Circulation Method)

  • 박형수;김철호
    • 한국산학기술학회논문지
    • /
    • 제18권3호
    • /
    • pp.122-126
    • /
    • 2017
  • 태양열 에너지를 이용하여 단순한 형태의 공기가열식 집열기를 이용하여 공기를 가열하고 이를 활용하여 생활공간의 난방문제를 해결하기 위한 장치를 개발하는데 목적을 두고 진행되고 있다. 현 시점에서 연구는 모델로 개발한 공기가열식 태양열에너지 집열기의 크기 변화에 따른 가용한 에너지의 량을 이론적으로 산출해 보고 이를 통해 개발 시스템의 가능성을 판단하고자 한다. 본 연구에서는 공기가열식 태양열 집열기의 공기가열성능을 판단하기 위하여, 특정 크기의 태양열 집열기에 일정한 일사량을 투하하였을 때, 모델 집열기 내부에서의 열전달 특성변화와 이를 통해 생산되는 공기의 온도($^{\circ}C$)와 생산량(kg/h)을, 유한체적법(Finite Volume Method)을 적용한 범용 열유동해석(CFD) 프로그램인 영국 CHAM사의 PHOENICS(1)를 이용하여, 분석한 결과를 구하였다. 분석한 결과에서 알 수 있듯이 집열기의 크기가 ($1.2m{\times}1.1m{\times}0.19m$)의 집열기에서 알루미늄으로 제작하는 내경 0.1m의 공기 가열관을 이용하여 가열할 수 있는 공기의 온도는 약 $40.5^{\circ}C$이며 이때 생산되는 공기의 생산량은 약 $161m^3/h$으로 산출되었다. 본 모델장치는 충분히 태양의 열에너지를 이용하여 실내공간의 온도를 인간이 활동하기에 적합한 활동의 환경을 유지하는데 활용할 수 있다고 판단된다.

도시지역에 적용된 LID 기법의 강우시 수문특성 및 물순환 평가 (Assessment of Water Circulation and Hydro-characteristics with LID techniques in urbanized areas)

  • 최혜선;홍정선;전민수;케빈;김이형
    • 한국습지학회지
    • /
    • 제21권3호
    • /
    • pp.191-198
    • /
    • 2019
  • 도시지역의 높은 불투수면은 강우시 지표 유출량을 증가시키고 지하침투량을 줄이면서 물순환을 왜곡시킨다. 왜곡된 물순환은 도시침수와 가뭄, 비점오염유출로 인한 수질오염 및 수생태계 훼손 등의 다양한 도시환경 문제 등을 유발시킨다. 기후변화는 도시강우의 계절적 편중현상을 더욱 심화시키고 도시 미기후에 영향을 줌으로써 도시침수와 가뭄의 강도 및 빈도를 증가시킨다. LID(Low Impact Development) 기법은 도시내 자연적 물순환 체계를 회복함으로써 물로 인하여 발생하는 도시환경문제를 줄일 수 있는 기법으로 다양하게 적용되고 있다. 본 연구에서는 도시지역 내 적용된 다양한 LID 기법의 장기 모니터링 결과를 활용하여 LID 적용 이후 수문특성의 변화와 물순환 회복에 기여도를 평가하기 위하여 수행되었다. LID 시설의 높은 저류량과 침투능력은 강우시 첨두유출 저감과 유출지연에 크게 기여하는 것으로 나타났다. LID 시설에서 강우시 평균 유출저감효과는 60% 이상으로 나타났으며, 유역면적 대비 LID 시설 면적비(Surface area of Catuchment area, SA/CA)와 LID 저류 용량은 첨두유출 저감과 유출지연 효과에 영향을 끼치는 중요한 인자로 평가되었다.

왜도 된 연흔모양 매트의 해빈 안정화 효과 수치해석 (Numerical Analysis of the Beach Stabilization Effect of an Asymmetric Ripple Mat)

  • 조용준
    • 한국해안·해양공학회논문집
    • /
    • 제31권4호
    • /
    • pp.209-220
    • /
    • 2019
  • 해빈 안정화를 위해 거치되는 강성 구조물의 규모는 해빈의 자기 치유 능력이 구현되는 해빈 대순환 과정이 훼손되지 않는 범위에서 결정되어야 하나 최근 지나치게 대형화 되어 광폭 잠제도 빈번하게 차용되고 있는 실정이다. 이러한 시각에 기초하면 Irie et al.(1994)가 제안한 왜도 된 연흔모양 매트는 규모가 크지 않다는 점에서 현재 선호되는 광폭잠제의 대안이 될 수 있을 것으로 판단된다. 전술한 왜도 된 연흔모양 매트의 해빈 안정화 효과는 매트의 유수 단면 축소부에서 강제되는 와류가 run-down 시 외해방향으로 이송되는 표사를 얼마나 효과적으로 포획할 수 있느냐에 따라 결정되는 것으로 추정된다. 본 논문에서는 이러한 가설을 확인하기 위해 수치모의를 수행하였다. 수치모형은 Navier-Stokes 식과 물리기반 지형모형으로 구성하였으며, 모의 결과 왜도 된 연흔모양 매트 정점부에서 강제된 와류에 의해 포획된 표사가 해안 방향으로 이송되는 등 왜도 된 연흔모양 매트의 해빈 안정화 효과를 구성하는 주요 기작과 해빈 안정화 효과를 확인할 수 있었다.

설비공학 분야의 최근 연구 동향: 2011년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research: A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2011)

  • 한화택;이대영;김서영;최종민;백용규;김수민
    • 설비공학논문집
    • /
    • 제24권6호
    • /
    • pp.521-537
    • /
    • 2012
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.

RELA5/MOD1/NSC를 이용한 원자력 1호기 외부전원상실사고해석 - I. 실제사고해석 (Analysis of Loss of Offsite Power Transient Using RELAP5/MODl/NSC; I: KNU1 Plant Transient Simulation)

  • Kim, Hho-Jung;Chung, Bub-Dong;Lee, Young-Jin;Kim, Jin-Soo
    • Nuclear Engineering and Technology
    • /
    • 제18권2호
    • /
    • pp.97-106
    • /
    • 1986
  • 1981년 6일 9일 원자력 1호기에서 발생한 77.5% 출력상태에서의 외부전원상실사고를 열, 수력학적최적계산용 코드인 RELAP5/MODl/NSC를 사용하여 모의하였으며 해석결과는 발전소 실측자료와 잘 일치하였다. 원자로 냉각재펌프의 트립에 따른 flow coastdown후에 hot-cold leg온도차에 의하여 자연순환 유동이 형성됨이 확인되었으며 실측자료와 잘 일치하여 이와 관련된 전산코드의 열수력학 적모델의 타당성을 입증할 수 있었다. 또한 위의 사고전개가 정상운전상태인 전출력(100%)에서 재발하였을 경우를 가정하여 해석하였다. 이러한 해석을 통하여 보조급수의 공급과 더불어 증기발생기 PORV의 적절한 작동으로 원자력 1호기 노심잔열을 제거하여 안전성에 문제점을 야기하지 않음을 입증하였다. 최적 계산방법에 의한 사고해석에서는 turbine stop valve 작동시간, 증기 발생기 PORV 설정치 등 non-safety 관련요소들의 특성에 대한 정화한 모의가 필수적이다.

  • PDF