• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.4
• /
• pp.21-30
• /
• 2022

Renewable energy systems aim to achieve carbon neutrality and replace fossil fuels. Photovoltaic technologies are the most widely used renewable energy. However, they require a large operating area, thereby decreasing available farmland. Accordingly, agrivoltaic systems (AVSs)-innovative smart farm technologies that utilize solar energy for crop growth and electricity production-are attracting attention. Although several empirical studies on these systems have been conducted, comprehensive research on their design is lacking, and no standard model suitable for South Korea has been developed. Therefore, this study created an integral design of AVS reflecting domestic crop cultivation conditions and conducted a structural analysis for safety assessment. The shading ratio, planting distance, and agricultural machinery work of the system were determined. In addition, national construction standards were applied to evaluate their structural safety using a finite element analysis. Through this, the safety of this system was ensured, and structural considerations were put forward. It is expected that the AVS model will allow for a stable utilization of renewable energy and smart farm technologies in rural areas.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.2 no.2
• /
• pp.129-138
• /
• 2021

Living modified organisms (LMOs) are managed by seven government agencies according to their use in South Korea. The Ministry of Environment is responsible for LMOs used for environmental remediation. This study aimed to develop guidelines for assessing potential risks posed by transgenic plants used for remediation to insect ecosystems by investigating arthropod communities in sunflower fields. A total of 2,350 insects and spiders belonging to 134 species of 10 orders and 71 families were collected from sunflower fields over four growth stages ranging from anthesis to seed maturity. At the R3 phase of flower-bud formation, Chironomidae sp. of a decomposer insect guild presented the highest density, while Apis mellifera of a pollinator guild was the most abundant in the R5.8 phase of flowering. During the R7 seed-filling phase and the R9 phase of seed maturity, herbivorous Pochazia shantungensis predominated. During the R9 phase, richness and diversity indices of arthropod communities were distinctly lower whereas their dominance indices were significantly higher than those at other phases. In addition, the composition of arthropod communities was strongly correlated not only with the sampling date, but also with the sampling method depending on the growth stage of sunflowers. Our results suggest that appropriate sampling timing and methods should be considered in advance and that long-term field trials that cover a variety of environmental conditions should be carried out to evaluate potential risks to insect ecosystems.

• Journal of Nutrition and Health
• /
• v.55 no.3
• /
• pp.406-417
• /
• 2022

Purpose: The incidence of chronic diseases is increasing and the age of onset is decreasing in South Korea. Healthy eating habits to prevent chronic diseases are established in adolescence. This study verified the identified factors and dynamics that affect diet self-assessment for sustainable adolescent health and the prevention of chronic diseases. Methods: Data were collected from 492 middle and high school students in South Korea from June to July 2018, and the participants answered a questionnaire on dietary safety management competency for sustainable health. Results: The healthy dietary self-assessment scores of overweight/obese adolescents and adolescents who perceived their health as normal were significantly lower than those of other groups. Factor analysis verified the validity of the items that comprised each study area before a multiple regression analysis was used to investigate the factors affecting healthy dietary self-assessment. Sweet and salty diets, anxiety, food and nutrition knowledge, weight management knowledge, stress management, exercise, basic eating habits, and healthy eating habits significantly affected healthy dietary assessment among adolescents. A higher perception of one's health indicated a higher healthy dietary self-assessment, dietary safety knowledge, and health management practice scores (p < 0.01). Factors like healthy dietary self-assessment, food and nutrition knowledge, and weight management knowledge appear to have a significant correlation with other identified factors, except overeating. The adolescents' awareness, knowledge, and dietary safety practices influenced healthy dietary self-assessment, which can prevent chronic diseases and achieve sustainable health. Conclusion: This study illustrated how the adolescents' awareness, knowledge, and practices of dietary safety influenced their healthy diet self-assessment. The results indicate that diet-based health management competency education relative to the adolescents' self-perception and weight levels should be implemented.

• Journal of the Korean Society of Safety
• /
• v.35 no.6
• /
• pp.78-84
• /
• 2020

The F&EI technique is one of the risk assessments with many advantages. It can save time and effort compared to quantitative risk assessment (QRA). By using the evaluation result of this technique, it is possible to check the effectiveness of the investment cost. In addition, a relative risk ranking can be created and used to establish the facility management cycle and to prioritize investment. However, evaluating the target process can be evaluated more than the actual risk since the LCCF, a loss prevention measure, is too limited. In addition, calculating premiums via this method can result in excessive premiums, making it difficult to evaluate the risk precisely. Therefore, new safety guard was added to the LCCF of the F&EI risk assessment with reference to HAZOP and LOPA techniques. Newly added LCCFs are Deflagration arrester, Check valve, SIS, and Vacuum beaker, etc. As a case study, F&EI risk assessment was performed on Acetone storage tank of a API (Active pharmaceutical ingredient) plant to compare actual MPPD. The estimated loss amount was 592,558$ for the existing technique and 563,571$ for the improved technique, which was reduced by about 5% compared to the previous one.This proved that a more precise evaluation is possible and that the efforts for safety at the workplace are reflected in the evaluation results.

• Journal of the Korean Society of Safety
• /
• v.31 no.2
• /
• pp.90-97
• /
• 2016

The objective of this study is to evaluate the operator's safety for the risk assessment method of impulsive noise division. Literature reviews on the basis of the impulsive noise study, the measuring methods and procedures, based on the results of the analysis process presents a risk assessment methods. In this study, analysis of the MIL-STD-1474D, B-duration graph for the peak noise level to cross the line from the measurement results is limited by the risk retracted. It is possible to determine whether there is quick can be determined whether the risk. Measurement positions measured by the microphone is installed on the risk of applying results are so located within the tolerance impulsive noise in the measurement position can interpret subjective safety is ensured. In addition, Proportional Dose technology was the proposed by the Patterson with the risk assessment method was applied to the indoor-impulsive noise. As results of this study, results for the same value of applying the technique of Proportional Dose technology results calculated by MIL-STD-1474D methods allows 1 count once increased in comparison to the result obtained.

• Nuclear Engineering and Technology
• /
• v.50 no.8
• /
• pp.1217-1233
• /
• 2018

Following a surge of interest in multi-unit risk in the last few years, many recent studies have suggested methods for multi-unit probabilistic safety assessment (MUPSA) and addressed several related aspects. Most of the existing studies though focused on two-unit nuclear power plant (NPP) sites or used rather simplified probabilistic safety assessment (PSA) models to demonstrate the proposed approaches. When considering an NPP site with three or more units, some approaches are inapplicable or yield very conservative results. Since the number of such sites is increasing, there is a strong need to develop and validate practical approaches to the related MUPSA. This article provides several detailed approaches that are applicable to multi-unit Level 1 PSA for sites with up to six or more reactor units. To validate the approaches, a multi-unit Level 1 PSA model is developed and the site core damage frequency is estimated for each of four representative multi-unit initiators, as well as for the case of a simultaneous occurrence of independent single-unit initiators in multiple units. For this purpose, an NPP site with six identical OPR-1000 units is considered, with full-scale Level 1 PSA models for a specific OPR-1000 plant used as the base single-unit models.

• Journal of Environmental Impact Assessment
• /
• v.12 no.1
• /
• pp.23-34
• /
• 2003

The emergency response modeling system CARIS has been developed at CCSM (Center for Chemical Safety Management), NIER (National Institute of Environmental Research) to track and predict dispersion of hazardous chemicals for the environmental decision support in case of accidents at chemical or petroleum companies in Korea. The main objective of CARIS is to support making decision by rapidly providing the key information on the efficient emergency response of hazardous chemical accidents for effective approaches to risk management. In particular, the integrated modeling system in CARIS consisting of a real-time numerical weather forecasting model and air pollution dispersion model is supplemented for the diffusion forecasts of hazardous chemicals, covering a wide range of scales and applications for atmospheric information. In this paper, we introduced the overview of components of CARIS and described the operational modeling system and its configurations of coupling/integration in CARIS. Some examples of the operational modeling system is presented and discussed for the real-time risk assessments of hazardous chemicals.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.384-391
• /
• 2020

An annual average of more than 100 casualties occur on construction sites designated by the occupational safety and health law despite the safety assessment regulations from Korea Occupational Safety & Health Agency. Even if those sites involve more harmful or hazardous work than other sites, the result creates doubt regarding the effectiveness of the safety assessment regulations. The safety of construction sites is difficult to maintain continuously and instantly because ofthe variability in the construction industry despite inspecting workers, equipment, and facilities by managers. Many discussions on how to utilize BIM have been made to improve the productivity of construction projects, and BIM-based modeling and simulation would bring many benefits to safety. This study examined the hindrance factors of field utilization of the safety assessment regulations through a research literature survey, disaster situation analysis and questionnaire, and suggests the necessity of the application of BIM that enhances the effectiveness of safety assessment regulations by identifying the relationship between the hindrance factors and the function of BIM.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.275-280
• /
• 2008

Recently the railway safety is very important issue in Korea because there are lots of changes like the separation of operation and facility of national rail network, the inauguration of high speed train and Daegu subway fire accident. Railway safety management system is based on risk assessment of rolling stocks, electrical system, signaling, operation & maintenance and human element. With this process, railway risk will be reduced as low as reasonably acceptable level. Through risk assessment on accident data, this study predicted the current risk level of railway electrical system and presented the proper safety ensuring measures.

• Journal of the Korean Society of Safety
• /
• v.33 no.6
• /
• pp.102-114
• /
• 2018

The Railway Safety Management System is based on risk management and the basic purpose of risk management is safety management activities to prevent railway accidents and operational obstacles in advance. In order to manage risk, an acceptable risk standard must be established. This risk criterion is used to evaluate the railway risk with both frequency and severity. In the case of overseas railway or other industrial sectors, various factors are reflected in the main variables that constitute the occurrence frequency, but this is no the case in the domestic railway sector. In particular, the current risk assessment criteria in the railway sector remain at a level that exploits the incidents that have occurred in the past and the severity of the property damage and it dose not properly reflect complex and diverse environmental and situational changes in railway operations. Therefore, in this study, it is possible to calculate the potential occurrence of future events instead of occurrence frequency as a component of the risk assessment criteria, focusing on the High-Speed Railway. In addition to the property damage to the consequence, we suggest a rational methodology, development direction, and theoretical implications for constructing accurate and reasonable risk criteria including actual damage such as human injury and time loss.