• Research in Community and Public Health Nursing
• /
• v.12 no.2
• /
• pp.532-546
• /
• 2001

This report is the result of interim evaluation of a health promotion project which was operated by a public health center of K Gu in the year of 2000. It evaluated the aspects of the aim of a project, a target group. and adequacy and appropriateness of a approaching strategy by considering data of public health center's self-evaluation, and guidelines of a group assigned to evaluate the project. The way of evaluation was dividing the project into a colligated evaluation and a evaluation by projects in the aspects of the structure, the procedure. and the result of a result. Through this. a device to improve the health improvement project was derived. The target data for evaluation was the second data and data of self-evaluation, reported data, membership register data of a health management. and interview materials with the people in charge by projects that are all collected as a project management documents. The result of evaluation is stated below. 1. Main purpose of a health promotion project is building a environment of healthy life practicing and providing information through various ways to increase the rate of practicing healthy life. Through overall project. the ultimate purpose and definite purpose were same, however, it was not quite satisfied to offer planning of a time, and a target amount in detailed strategy. As the purpose was to build environment of healthy life practicing. most of the projects had the whole community citizen as a target group. That made difficult to operate detailed projects. so the result was hard to estimate as much as the effort put into it. Also, there were too many kinds of projects and target groups to be equal to by the human source of a health promotion project team. so we were just bent on operating a project. and could not prepare for the evaluation. As the most of former evaluation of public health service was just counting number of the objects, the new way of evaluating a project wasn't familiar to us. so the evaluation of a detailed project cannot be done well. Techniques and advices needed for all of these things weren't offered appropriately. For the forward direction of unfolding project. it is desirable to operate project by selecting focused target and considering a strategy of evaluation as a strategy of reasonable spread. The evaluation of the project became difficult as participation of citizen for it was poor. So, approach strategy that can lead the motivation of community citizen should be derived. 2. For the continuation of a health promotion project, technical assistance system. description of a field in charge, and arrangement of the amount of task should be developed as a central level. Furthermore, as the health promotion project focus on behavioral modification program whose purpose is to lessen dangerous factors. the public health service model which is incorporated with former project should be developed and spread out in the field for the object-centered project plan.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.4
• /
• pp.50-61
• /
• 2010

Nowadays, the SoC is watched by all over the world with interest. The design trend of the SoC is hardware and software co-design which includes the design of hardware structure in RTL level and the development of embedded software. Also the technology is toward deep-submicron and the observability of the SoC's internal state is not easy. Because of the above reasons, the SoC debug is very difficult and time-consuming. So we need a reliable debugger to find the bugs in the SoC and embedded software. In this paper, we developed a hardware debugger named OCD. It is based on IEEE 1140.1 JTAG standard. In order to verify the operation of OCD, it is integrated into the 32bit RISC processor - Core-A (Core-A is the unique embedded processor designed by Korea) and is tested by interconnecting with software debugger. When embedding the OCD in Core-A, there is 14.7% gate count overhead. We can modify the DCU which occupies 2% gate count in OCD to adapt with other processors as a debugger.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.1
• /
• pp.75-82
• /
• 2000

In this paper, a new low power 16-bit ALU has been designed, fabricated and tested at the transistor level. The designed ALU performs 16 instructions and has a two-stage pipelined architecture. For the reduction of switched capacitance, the ELM adder of the proposed ALU is inactive while the logical operation is performed and P(propagation) block has a dual bus architecture. A new efficient P and G(generation) blocks are also proposed for the above ALU architecture. ELM adder, double-edge triggered register and the combination of logic style are used for low power consumption as well. As a result of simulations, the proposed architecture shows better power efficient than conventional architecture$^{[1,2]}$ as the number of logic operation to be performed is increased over that of arithmetic to logic operation to be performed is 7 to 3, compared to conventional architecture. The proposed ALU was fabricated with 0.6${\mu}m$ single-poly triple-metal CMOS process. As a result of chip test, the maximum operating frequency is 53MHz and power consumption is 33mW at 50MHz, 3.3V.

• Genomics & Informatics
• /
• v.3 no.4
• /
• pp.166-171
• /
• 2005

Background: Smoking effects are relatively well-documented, especially on cancers and cardiovascular diseases. However, the direction and magnitude of association between smoking and obesity remain unclear. Conflicting results so far are thought to stem from the multiple confounding structure of smoking and other obesogenic life style characteristics. Methods: Cotwin control study is a genomic epidemiology design, in which the other twin (=cotwin) serves as a control of the twin. Cotwin control study, discordant for smoking habits can provide powerful evidence of association between smoking and obesity by completely matching genomic information, intrauterine environment, and almost all environmental factors. We selected 3,697 like-sex twin pairs (2,762 male and 935 female pairs) out of 63,666 pairs of adult twins in the existing Korea Twin and Family Register, whose smoking habits are discordant. We used the information of obesity as body mass index (BMI, $kg/m^2$) blood pressure, and blood cholesterol level at the time or later than the smoking information. Paired t-test was done to compare the smoking effects. Results: Lifetime smoking rate was 80.1 % (47.9 current smoker) for men and 10% (1.7% current smoker) for women. Among 2,762 and 935 male and female like-sex twin pairs, 363 male pairs and 20 female pairs correspond to the definition of smoker-nonsmoker pair. The male smokers demonstrated increase in BMI by 0.47, while female smokers show slight decrease (by 0.13), which were not statistically significant. Diastolic and systolic blood pressure, and cholesterol level were slightly increased among smokers by 1.85 mmHg, 0.62 mmHg, and 1.28 mg/dl for men. For women, the results show increase in diastolic blood pressure (3.42mmHg) and cholesterol level (1.25 mg/dl), and systolic pressure (8.17 mmHg). Conclusion: The results refute the possibility that smoking can reduce BMI. Considering the direct adverse effect of smoking, it should be emphasized that smoking do not decrease obesity and thus increase overall metabolic syndrome.

• Journal of Environmental Impact Assessment
• /
• v.30 no.2
• /
• pp.75-88
• /
• 2021

Six locations in the automated monitoring network at the Geum River Basin were selected forthis study. The water quality characteristics at two of the locations in the water quality monitoring network that were identical, or nearby, were examined, and their correlations were evaluated through statistical analysis. The results of the water quality analysis were converted to the water quality index and expressed in grades for comparison. For the data necessary for the study, public data from four years, from 2016-2019 were used and the evaluation parameters were water temperature, pH, EC, DO, TOC, TN, and TP. Results of the analysis showed that the water quality concentrations measured in the automated monitoring network and the water quality monitoring network differed in some measured values, but they tended to register variation in a specified ratio in most of the locations in the network. The analysis of the correlations of the parameters between the two monitoring networks found that water temperature, EC, and DO showed high correlations between the two monitoring networks. The TOC, TN, and TP showed high correlations, with a 0.7 or higher (correlation coefficient r), with the exception of some of the monitoring networks, although their correlations were lower than those of the basic parameters. The water quality index analysis showed that the water quality index values of the automated monitoring network and the water quality monitoring network were similar. The water quality index decreased and the pollution degree increased in the downstream direction, in both networks.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.1
• /
• pp.23-35
• /
• 2023

Recently, the damage caused by natural disasters such as typhoons and localized torrential rains has been increasing rapidly. The Ministry of the Interior and Safety enacted a ｢law on safety management of small sized infrastructures｣ and local governments have to register small sized infrastructures with the National Disaster and Safety Management System (NDMS) until March 31st every year. Recently, each local government has ordered Safety inspections of small sized infrastructures and maintenance plans and six types of facilities, including small streams, small bridges, farm roads, access roads to village, inlet weirs, and drop structures are being surveyed and digitized into a database. Each facility is being evaluated for risk, and for those deemed hazardous, maintenance plans are being developed. However, since the risk assessment method of small sized infrastructures is not clear so that is conducted through visual investigation by field investigators, risk assessment is conducted in a subjective and ambiguous form. Therefore, this study presented a reasonable and quantitative risk assessment method by providing a quantitative evaluation indicator for small stream, which has the highest disaster risk among other small sized infrastructures, so that small sized hazard infrastructures can be selected to secure transparent evidence for improvement plans and action plans.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.3
• /
• pp.212-221
• /
• 2013

Objectives: Asbestos fibers are accumulated in negative pressure unit (NPU) or vacuum cleaner in asbestos removal. Failure of operation or poor use performance of the NPU or vacuum cleaner causes asbestos fibers to spread in the air. Asbestos contractors should have an NPU fitted with a HEPA , vacuum cleaner, decontamination area, respirators, wetting equipment, and differential pressure manometer to register with the Ministry of Employment and Labor. There should be performance criteria of equipment used in asbestos removal. But there are none such criteria used in asbestos removal. This study was performed to investigate international or national performance criteria of equipment used in asbestos removal. Methods: Regulations, approved code of practice, guidance and national standards of the UK, USA and Korea were reviewed. A survey was done to investigate the requirements for equipment used in asbestos removal in Korea. Results: Air flow of NPUs used in Korea usually covers from$500m^3/h$ to over $3000m^3/h$. Some requirements for NPUs used in Korea were missing compared to the requirements of British standards for NPUs. All NPUs have different missing requirements. The UK also has separate British standard for leak tests for NPUs. Highly hazardous class vacuum cleaners should be used in asbestos removal in the UK. It has national standards on the operation of vacuum cleaners used in asbestos removal. There is only a certification system for less than 2.5kw rated voltage vacuum cleaners for home use in Korea. Powered (-assisted) respirators with mask are recommended in asbestos removal. Type 5 coveralls should be used in asbestos removal in the UK. There are international standards for requirements and leak tests of type 5 coveralls. A manometer for measuring differential pressure is needed in asbestos removal. The manometer's measuring range should cover less than ${\pm}125$ Pa and the gradation of manometer should be less than 2.5 Pa. The definition of decontamination area should be corrected. Installation of airlock and minimum area should be considered in decontamination area. Conclusions: Equipment should be used in asbestos removal proper performance and no leaks. There should be a certification system for equipment used in asbestos removal. This study can help to a certification system for equipment used in asbestos removal in Korea.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.6
• /
• pp.1163-1170
• /
• 2016

A hardware implementation of ultra-lightweight block cipher algorithm PRESENT which was specified as a standard for lightweight cryptography ISO/IEC 29192-2 is described. The PRESENT crypto-processor supports two key lengths of 80 and 128 bits, as well as four modes of operation including ECB, CBC, OFB, and CTR. The PRESENT crypto-processor has on-the-fly key scheduler with master key register, and it can process consecutive blocks of plaintext/ciphertext without reloading master key. In order to achieve a lightweight implementation, the key scheduler was optimized to share circuits for key lengths of 80 bits and 128 bits. The round block was designed with a data-path of 64 bits, so that one round transformation for encryption/decryption is processed in a clock cycle. The PRESENT crypto-processor was verified using Virtex5 FPGA device. The crypto-processor that was synthesized using a $0.18{\mu}m$ CMOS cell library has 8,100 gate equivalents(GE), and the estimated throughput is about 908 Mbps with a maximum operating clock frequency of 454 MHz.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.1
• /
• pp.3-12
• /
• 2014

Cadastre is a set of activity registering diverse land information in national scope land management works. A nation examine land information and register it in a cadastral book, and must update data when necessary to properly maintain the information. Currently, local governments execute work about parcels of land alternation by manual work based on KLIS road map. Therefore, it takes too much time-consuming and makes problem as missing lots of parcels of land alternation. This study suggests the method selecting the parcels of land alteration for Jinan-Gun of Jeollabuk-Do using the GIS spatial overlay and the following results are as belows. Firstly, the manual work on the parcels of land alteration was greatly improved through automatically extracting the number and area of parcels according to the land classification and ownership by GIS spatial overlay based on serial cadastral maps and KLIS road lines. Secondly, existing work based on KLIS road lines could be advanced by analyzing the parcels of land alternation using the actual-width of the road from new address system to consider all road area for study site. Lastly, this study can supply efficient information in determining the parcels of land alternation consistant with road condition of local governments by analyzing the number and area of parcels according to the land classification and ownership within various roadsides ranging from 3m, 5m, and 10m by GIS buffering method.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.7
• /
• pp.746-751
• /
• 2006

In this study, drying and carbonization experiment was conducted in a fluidized bed reactor according to the variations in gas velocity, particle size, and reactor temperature. As a result, the weight loss rates of sludge by drying in the fixed bed and fluidized bed type dryer showed that drying in the fluidized bed was about 6 times faster than drying in the fixed bed, and the weight loss rates of sludge by carbonization in the fixed bed and fluidized bed type reactor showed that carbonization in the fluidized bed was about 4 times faster than drying in the fixed bed. This implies that carbonization in the fluidized bed was completed within 10 minutes. Although the amount of char decreased with the increase of carboniration temperature, the amount of char became similar at upper 873K. Also, the amount of char decreased with increasing gas velocity. Consequently, it could be efficient that slow fluidization should be maintained within the range of fluidization in case of fluidized carbonization of sewage sludge at 873K.