• 한국유체기계학회 논문집
• /
• 제17권1호
• /
• pp.12-21
• /
• 2014

An organic Rankine cycle was analyzed to work at the optimal operating point when the heat source is fluctuated. R245fa was adopted as a working fluid, and an axial-type turbine as expander on the cycle was designed to convert the heat energy to the electricity since the turbo-type expander works at off-design points better than the positive displacement-type expander. A supersonic nozzle was designed to increase the spouting velocity because a higher spouting velocity can produce more output power. They were designed by the method of characteristics for the operating fluid of R245fa. Three different cases, such as various spouting velocities, various inlet total temperatures, and various nozzle numbers, were studied. From these results, an optimal operating cycle can be designed with the organic Rankine cycle when the available heat source as renewable energy is low-grade temperature and fluctuated.

• 산업기술연구
• /
• 제25권A호
• /
• pp.39-47
• /
• 2005

Air void systems in hardened concrete has an important influence on concrete durability such as freeze-thaw resistance, water permeability, surface scaling resistance. Linear traverse method and point count method described at ASTM are the routine analysis of the air void system that have been widely used to estimate the spacing factor in hardened concrete. Recently, many concretes often have a spacing factor higher than the generally accepted $200-250{\mu}m$ limit for the usual range of air contents. This study is proposed to estimate the plane spacing factor by calculation of simplicity. The plane spacing factor need two parameters that are air content and numbers of air voids in the hardened concrete. Those obtained from the standard air-void system analysis of the ASTM C 457. The equation is valid for all values of paste-to-air ratio because the estimation of paste content is unnecessary at the using ASTM C 457. The plane spacing factor yields a similar estimate of the standard spacing factor.

• 한국국방경영분석학회지
• /
• 제28권2호
• /
• pp.85-94
• /
• 2002

Calculation of proper expenses on acquisition and purchasing defense product is matter of survival and weighing the morality for both defense industry and the national facilities. With this reason, both parties have been a big job to estimate the resonable cost. The cost are composed of many subordinated parts such as material cost, labor cost, and so on. In the compositions of that cost, the most important part in between companies and the government throughout the whole calculating process is to define the proper labor cost. When both parties calculate imported articles or overhead expenses, they can easily calculate and confirm by documented evidences or related materials. In other hand, the labor cost, which can be seen as two absolutely different numbers and opinions can be created, depends on analyzer's point of view. These interpretation and judgment of data cannot avoid analyzer's intention. In accordance with the above matters, defining the reasonable labor cost will be the top priority in order to analyze the proper expenses. This study will provide a method of proper labor cost estimation before starting the actual manufacturing to calculate the rational labor cost.

• International Journal of Clinical Preventive Dentistry
• /
• 제14권4호
• /
• pp.209-215
• /
• 2018

In recent years, the numbers of the orthodontic dental patients have been rapidly increased in adolescent or young adult aged generation. It has been well known that it would be very hard to control the oral hygiene cares for orthodontic applied dental patient because of the complexity of the appliance. So the caries prevalence of the orthodontic dental patients would be higher than non-appliance persons, and it might be easy to cause the dental caries especially on the labial or buccal surface of the tooth through equipping the fixed type appliance with a long period, even though the alignment of the teeth would be arranged well. So, the massive preventive program for preventive dentistry should be needed for the dental patients for orthodontic treatment, in order to protect the dental caries and the periodontal disease for them. But, lots of the dentists or dental hygienists sometimes neglect of this point for preventive dental cares orthodontic dental patients, or do not know the importance and how to manage the skill for the preventive dental works in clinical. In this article, it will be introduced the basic theories and skills for preventive cares as tooth-brushing instruction, fluoride topical application and pit and fissure sealant, scaling and professional mechanical tooth cleansing and the diet control, for the dental patients with the fixed type of the orthodontic appliance, in case by case.

• 한국태양에너지학회 논문집
• /
• 제36권6호
• /
• pp.1-12
• /
• 2016

A control algorithm for a 100 kW wind turbine is designed in this study. The wind turbine is operating as a variable speed variable pitch (VSVP) status. Also, this wind turbine is a permanent magnet synchronous generator (PMSG) Type. For the medium capacity wind turbine considered in this study, it was found that the optimum tip speed ratios to achieve the maximum power coefficients varied with wind speeds. Therefore a commercial blade element momentum theory and multi-body dynamics based program was implemented to consider the variation of aerodynamic coefficients with respect to Reynolds numbers and to find out the power and thrust coefficients with respect tip speed ratio and blade pitch angles. In the end a basic power controller was designed for below rated, transition and above rated regions, and a load reduction algorithm was designed to reduce tower vibration by the nacelle motion. As a result, damage equivalent Load (DEL) of tower fore-aft has been reduced by 32%. From dynamic simulations in the commercial program, the controller was found to work properly as designed. Experimental validation of the control algorithm will be done in the future.

• Journal of Biosystems Engineering
• /
• 제35권3호
• /
• pp.182-188
• /
• 2010

Post-Harvest processing engineering is a field that studies prevention of the quality change of agricultural products during sorting, packaging, storage, and distribution after harvested. In distribution steps, agricultural products could be damaged by physical force, it is the main reason of low quality and they lost value of commodities. This study was performed to find the vibration characteristics of the peach, and to find the extent of the damage on the peach by fatigue stress. The vibration data was obtained on expressway and the vibration characteristics of peach was used to find the damage on the peach. To analyze the vibration characteristics of peach, the resonance frequency and vibration transmissibility were measured. The resonance frequency of the peach was 167.98 Hz and the transmissibility was 4.06 at resonance point. It was 150 ~ 250 Hz that the transmissibility was more than 1. And the transmissibility in simulated test was measured. When the trasmissibility was more than 1, the range was 15 ~ 65 Hz, and when it was less than 1, the range was 65 ~ 175 Hz. When the transmissibility was about 1, the range was 5 ~ 15 Hz. The damage and the vibration cycle numbers of peaches were compared with input frequency and acceleration. More damage and less cycle number happened in 30 Hz than in 62.5 Hz. The reason was that the transmissibility of 30 Hz was higher and the vibration displacement in lower frequency was more. The more acceleration and cycle number increased, the more the bruising volume of peaches increased. The bruising volume ratio for vibration fatigue was measured according to input acceleration and cycle number. Using measured data, regression models for bruising volume ratio(BVR) was developed as a function of the acceleration(A) and cycle number(CN) as follows. BVR = a * $A^b*$ $(CN)^c$

• 한국직업건강간호학회지
• /
• 제21권3호
• /
• pp.247-257
• /
• 2012

Purpose: This study is designed to identify major factors that affect morale among staff of long-term care insurance in National Health Insurance Corporation. Methods: In order to collect the data, a survey was conducted by using the structured questionnaire based on 161 staff members of long-term care insurance of 50 long-term care operation centers, which were randomly selected by the table of random numbers in the whole centers of National Health Insurance Corporation from September 1 to 30, 2011. As for the data analysis, SPSS 18.0 was used to conduct the descriptive statistics, t-test, ANOVA, Pearson correlation coefficient, mutiple regression, and path analysis. Results: The average point of morale was 3.37, and had a negative correlation with the job stress, while it had a positive correlation with the social support, professional identity, and self-efficacy. Job stress, social support, and professional identity have a significant effect on morale among the independent variables. These variables have significant effects on morale, and also have a positive effect on self-efficacy. The findings show that self-efficacy mediates the process of morale. Conclusion: In this study, the factor which influences the morale was identified. It turned out that the morale could be improved by reinforcing the professional identity, managing the health status as well as rotating the working place. As such, it expects both the improvement of long-term care insurance services outcome and its quality through the morale management.

• 한국수의병리학회지
• /
• 제1권1호
• /
• pp.1-6
• /
• 1997

The cellularity and composition of the spleen lymph node thymus and peripheral blood and tempo of regeneration were studied at various time points after syngeneic bone marrow transplantation(BMT) in C3H/Hen mice. Significant depression of absolute lymphocyte count was noted on week 1 after lethal whole-body irradiation and BMT. In comparison to the lymph node thymus and spleen had an rapid regeneration of cellularity. The distinct cell populations($CD4^+,\;CD8^+,\;CD28^+,\;B220^+) have determined in the lymphoid tissue of mice subjected to irradiation. The relative representation of these subpopulations was significantly different from that in nonirradiated control. $CD4^+\;and\;CD8^+$ cells were present in very low numbers whereas the $B220^+$ cells reached more than normal range at 2 weeks after BMT. The number of $CD4^+$ cells returned to normal relatively soon than $CD8^+$ cell. At week 4 after BMT, the cellularity and composition of spleen lymph node and peripheral blood lymphocyte reached about 50% of the normal range therefore we can choose this time point for the other tests of immune function after BMT.

• Journal of Korean Biological Nursing Science
• /
• 제21권1호
• /
• pp.85-97
• /
• 2019

Purpose: This study was performed to analyze the levels of blood pressure and to identify good or poor blood pressure control (BPC) groups among hypertension patients. The study was based on the Korea National Health and Nutrition Examination Survey (KNHANES VI and VII) conducted from 2013 to 2016. Methods: The sociodemographic and clinical data of 4,151 Korean hypertension patients aged 20-79 years and who were taking antihypertensive medications was extracted from the KNHANES VI and VII database. Descriptive statistics for complex samples and a decision-tree analysis were performed using the SPSS WIN 24.0 program. Results: The mean age was $62.46{\pm}0.21years$. The mean systolic blood pressure (SBP) was $128.07{\pm}0.28mmHg$, and the diastolic blood pressure (DBP) was $76.99{\pm}0.21mmHg$. 71.9% of participants showed normal blood pressure (SBP < 140mmHg and DBP < 90mmHg). From the decisiontrees analysis, the characteristics of participants related to good BPC group were presented with 9 different pathways same as those from the poor BPC group. Good or poor BPC groups were classified according to the patients' characteristics such as age, living status, occupation, education, hypertension diagnosis period, numbers of comorbidity, perceived health status, total cholesterol, high density lipoprotein-cholesterol, alcohol drinking per month, and depressive mood. Total cholesterol level (< 201mg/dL or ${\geq}201mg/dL$ cutoff point) was the most significant predictor of the participants' BPC group. Conclusion: This decision-tree model with the 18 different pathways can form a basis for the screening of hypertension patients with good or poor BPC in either clinical or community settings.

• 한국가정과교육학회지
• /
• 제17권4호
• /
• pp.55-71
• /
• 2005

이 연구는 가정과 교육과 관련 논문을 게재하는 한국가정과교육학회지를 중심으로 대한가정학회지와 한국실과교육학회지를 종합하여 가정과 교과교육과 관련된 논문을 비교 분석하였다. 본 연구의 목적은 가정과 교과교육 관련 논문을 분석하여 최근의 가정과 교육 연구의 동향을 파악하고 앞으로의 가정학의 발전 방향을 찾아보고자 하는 것이다. 연구 결과는 학회지 발행 현황과 게재된 가정교육과 관련된 논문의 분량에서는 실과교육학회지와 한국가정과교육학회지와 같이 양이 증가하고 있으나 대한가정학회지에는 그 반대이다. 연구 영역별 분포와 시대별 변천은 교수$\cdot$학습 방법 및 교재 연구가 가장 높은 비율을 차지하고 있고, 연구 주제 단원이나 영역은 가정교육과 관련된 논문이 주를 이루고 있다. 연구 유형은 대부분이 조사연구로 연구되었다. 연구 대상자는 1 집단 연구가 가장 많았으며, 연구 대상자 구성이 다양하였다. 연구 대상자의 규모는 학회지별로 규모에 차이가 맡았으며, 대상 지역은 1개 지역이 절반 이상으로 가장 많았다. 연구자의 구성은 2인 경우는 가장 높은 비율을 차지하고 있었고, 학교 및 연구기관별 게재 현황은 중$\cdot$고등학교가 가장 맡았다. 연구비 수혜 상황은 대체로 낮았으며, 참고문헌의 종류는 국.내외 모든 논문을 제시한 논문이 가장 많았고, 참고문헌의 수도 학회지에 따라 많은 차이를 보이고 있다.