• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.3
• /
• pp.243-250
• /
• 2019

The nanosecond laser assisted ablation have been investigated. The biocompatable polymer PMMA was employed as the target material and the two distinctive surface conditions were test. The first surface condition is a dry surface for which the target surface is exposed to air and the second surface condition is the wet surface for which the target surface is covered with dehydrated water. The ablation volume, the laser induced acoustic wave, the laser induced plasma were investigated for both wet and dry condition. The nanosecond laser pulse ablatied more on the wet surface compared to the dry surface. The enhanced ablation of wet surface is attributed to the confined acoustic wave and the laser-induced plasma in the liquid layer.

• Medical Lasers
• /
• v.10 no.2
• /
• pp.90-95
• /
• 2021

Background and Objectives Surgery for harvesting costal cartilage is often required for revision septorhinoplasty due to a lack of septal cartilage in patients with a severely contracted nose, and postoperative scarring on the anterolateral rib cage commonly requires additional treatment. This study aimed to evaluate the therapeutic efficacy and safety of combined polydeoxyribonucleotide (PDRN) and microlens array (MLA)-type nanosecond-domain neodymium (Nd):yttrium-aluminum-garnet (YAG) laser treatment for postoperative scars after costal cartilage harvest surgery. Materials and Methods Nine Korean patients with scars after costal cartilage harvest surgery treated with PDRN injections and MLA-type Nd:YAG laser treatments were retrospectively reviewed. Results Most of the scar lesions exhibited clinical improvement at 2 weeks after PDRN and MLA-type nanosecond-domain laser treatments, and the lesions further improved after adding more treatment sessions. The median Vancouver Scar Scale (VSS) score decreased from 6 (interquartile range [IQR]: 6-7) before combined intralesional PDRN injection and MLA-type, nanosecond-domain Nd:YAG laser treatments to 3 (IQR: 2-4) thereafter. Patient satisfaction after the combination treatments was rated as satisfactory. None of our patients reported major adverse events. Conclusion This case series study demonstrated that combined PDRN and MLA-type, nanosecond-domain Nd:YAG laser treatments are effective and safe for treating scars from costal cartilage harvest surgery.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.231-232
• /
• 2010

• Bulletin of the Korean Chemical Society
• /
• v.6 no.4
• /
• pp.234-238
• /
• 1985

The photoisomerization of 5-styryl-1,3-dimethyluracil is studied with nanosecond laser flash photolysis technique at room temperature. The laser flash photolysis of E-isomer produces the transient absorption spectrum regarded as the triplet-triplet absorption, but the transient absorption of Z-isomer does not show the typical decay curve, probably due to the facile photocyclization reaction during the laser flash photolysis. Using the energy transfer method on nanosecond laser spectroscopy, the energy of the lowest triplet state for E isomer is estimated to lie between 41.8 and 47 kcal/mol. The triplet lifetime for E-isomer obtained from the decay curve of the transient absorption is ca. 93ns. The $S_1 → T_1$ intersystem crossing of E-isomer on direct excitation is relatively inefficient at room temperature supporting the singlet mechanism for direct photoisomerization.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.107-108
• /
• 2010

• Bulletin of the Korean Chemical Society
• /
• v.35 no.12
• /
• pp.3547-3552
• /
• 2014

Laser Raman spectroscopy is one of the most powerful technologies for standoff detection of hazardous materials including explosives. Supported by recent development of laser and sensitive ICCD camera, the technology can identify trace amount of unknown substances in a distance. Using this concept, we built a standoff detection system, in which nanosecond pulse laser and nanosecond gating ICCD technique were delicately devised to avoid the large background noise which suppressed weak Raman signals from the target sample. In standoff detection of explosives which have large kill radius, one of the most important technical issues is the detection distance from the target. Hence, we focused to increase the detection distance up to 54 m by careful optimization of optics and laser settings. The Raman spectra of hazardous materials observed at the distance of 54 m were fully identifiable. We succeeded to detect and identify eleven hazardous materials of liquid or solid particles, which were either explosives or chemical substances used frequently in chemical plants. We also performed experiments to establish the limit of detection (LOD) of HMX at 10 m, which was estimated to be 6 mg.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.11
• /
• pp.832-840
• /
• 2008

Ablation occurs at irradiance beyond $10^9\;W/cm^2$ with nanosecond and short laser pulses focused onto any materials. Phenomenologically, the surface temperature is instantaneously heated past its vaporization temperature. Before the surface layer is able to vaporize, underlying material will reach its vaporization temperature. Temperature and pressure of the underlying material are raised beyond their critical values, causing the surface to explode. The pressure over the irradiated surface from the recoil of vaporized material can be as high as $10^5\;MPa$. The interaction of high power nanosecond laser with a thin metal in air has been investigated. The nanosecond pulse laser beam in atmosphere generates intensive explosions of the materials. The explosive ejection of materials make the surrounding gas compressed, which form a shock wave that travels at several thousand meters per second. To understand the laser ablation mechanism including the heating and ionization of the metal after lasing, the temporal evolution of shock waves is captured on an ICCD camera through laser flash shadowgraphy. The expansion of shock wave in atmosphere was found to agree with the Sedov's self-similar spherical blast wave solution.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.2 s.191
• /
• pp.134-139
• /
• 2007

Usually nanosecond pulsed laser processing of metal is mainly affected by the thermal ablation. Many studies of the theoretical analysis and modeling to predict the laser ablation of metal are suggested on the basis of the photothermal mechanism at higher laser fluence. In this paper, we investigate the etching depth and laser fluence of laser ablation of copper foils and propose the simplified SSB Model(Srinivasan-Smrtic-Babu model) to study the photothermal effect of nanosecond pulsed laser ablation. The experimental results show that the photothermal ablation of the 355nm DPSS $NdYVO_{4}$ laser is useful to process the copper thin foils.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.653-654
• /
• 2006

In case of ultrashort laser ablation of metals, the transfer of energy from the electronic system causing strong absorption of laser light to the lattice needs relaxation times of the order of some picoseconds. Under the above theoretical background, nickel was ablated using femtosecond, picosecond and nanosecond laser. As a result, nickel ablation by picosecond laser and femtosecond laser, which are called ultrashort laser, has similar machinability because of relaxation time of metals, whereas nanosecond Nd:YAG laser has lower absorption, higher thermalization effect in comparison with ultrashort laser.

• Journal of the Optical Society of Korea
• /
• v.17 no.1
• /
• pp.1-4
• /
• 2013

For the conventionally polished fused silica substrate, an around 100 nm depth redeposition polishing layer was formed on the top of surface. Polishing compounds, densely embedded in the redeposition polishing layer were the dominant factor that limited the laser induced damage threshold (LIDT) of transmission elements in nanosecond laser systems. Chemical etching, super-precise polishing and ion beam etching were employed in different ways to eliminate these absorbers from the substrate. After that, Antireflection (AR) coatings were deposited on these substrates in the same batch and then tested by 1064 nm nano-pulse laser. It was found that among these techniques only the ion beam etching method, which can effectively remove the polishing compound and did not induce extra absorbers during the disposal process, can successfully improve the LIDT of AR coatings.