• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1422-1424
• /
• 2009

Modified self-assembled $TiO_2$ and polyelectrolyte multilayer film have been used as OTFT insulator. Both films were used as gate insulator and their thickness were reduced to the order of 10nm. The operating voltage of OTFT was substantially reduced due to nanoscale thickness of titanium oxide and polyelectrolyte multilayer. Pentacene-based OTFT characteristics will be discussed.

• 진공이야기
• /
• 제2권1호
• /
• pp.10-16
• /
• 2015

With the recognition of nanotechnology as one of the future strategic technologies, the R&D efforts have been performed under exclusive supports of governments and private sectors. At present, nanotechnology is at the focus of research and public attention in almost every advanced country including USA, Japan, and many others in EU. Keeping tracks of such technical trends, center for nanoscale mechatronics and manufacturing (CNMM) was established in 2002 as a part of national nanotechnology promotion policy led by ministry of science and technology (MOST) in Korea. It will hold widespread potential applications in electronics, optical electronics, biotechnology, micro systems, etc, with the promises of commercial visibility and competitiveness. In this paper, wafer scale multilayer nanoimprint lithography technology which is well-known the next generation lithography, roll-typed nanoimprint lithography (R-NIL), roll-typed liquid transfer imprint lithography (R-LTIL), the key technology for nanomanufacturing and nanoscale measurement technology will be introduced. Additionally, its applications and some achievements such as solar cell, biosensor, hard disk drive, and MOSFET, etc by means of the developed multilayer nanoimprint lithography system are introduced.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 동계학술발표회 논문집
• /
• pp.13-14
• /
• 2007

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.309-309
• /
• 2006

Latest developments on hybrid nanostructured materials fabricated by applying self-assembly strategies on organic/inorganic nanotemplates are discussed. Within this frame, numerous functional nanomaterials including arrays of composite metal/semiconductor nanoparticles, planar waveguides and functional multilayer thin films are generated using self-assembled polymers as templates or building blocks. In particular, surface plasmon resonance based optical sensing is employed to investigate nanofabrication processes occurring in nanoscale dimention. We also suggest unprecedented pathways to hybrid supramolecular multilayer nanoarchitectures in 1D or 2D geometry via layer-by-layer self-assembly.

• Macromolecular Research
• /
• 제17권4호
• /
• pp.232-239
• /
• 2009

This paper describes the simple nanopatterning of proteins on polyelectrolyte surfaces using microcontact printing with a nanopatternable, hydrophilic composite nanomold. The composite nanomold was easily fabricated by blending two UV-curable materials composed of Norland Optical Adhesives(NOA) 63 and poly(ethylene glycol) dimethacrylate(PEG-DMA). NOA 63 provided stable nanostructure formation and PEG-DMA induced high wettability of proteins in the nanomold. Using the composite mold and functionalized surface with polyelectrolytes, the fluorescent, isothiocyanate-tagged, bovine serum albumin(FITC-BSA) was successfully patterned with 8 nm height and 500 nm width. To confirm the feasibility of the protein assay on a nanoscale, a glycoprotein-lectin assay was successfully demonstrated as a model system. As expected, the lectins correctly recognized the nano-patterned glycoproteins such as chicken ovalbumin. The simple preparation of composite nanomold and functionalized surface with a universal platform can be applied to various biomolecules such as DNA, proteins, carbohydrates, and other biomolecules on a nanoscale.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.221-224
• /
• 1996

We synthesized amphiphilic material including dye skeleton, p-phenylenediamine(PD) by attaching norma-decyl group of two strands at a part of coordinating atom, for obtaining reasonable design of LB uniform films. The synthesis of this compounds was quantitatively carried out under ultra pure state. This product was identified with FT-lR spectroscopy, UV absortion spectroscopy, and $^1$H-NMR spectroscopy, respectively. When manufacturing monolayer, we confirmed molecular area from pressure-area($\pi$-A) cutie of thiscompound onto the surface of the water. The spectroscopic approach also has done by UV absortion spectroscopy. It was shown that PD-complex LBfilms were deposited well with monolayer thickness. The conductivity based on I-V characteristics of PD-complex LB films were in the range of 10$^{-10}$ S/cm at room temperture. The microscopic properties by AFM, showed the good orientation of various monolayer or multilayer molecules

• Journal of Magnetics
• /
• 제12권3호
• /
• pp.124-128
• /
• 2007

Co/Cu GMR multilayers were electrodeposited from various electrolytes using the dual bath technique to achieve high sensitive GMR multilayers. GMR ratio and sensitivity were strongly influenced by solution compositions and electrodeposition parameters where GMR and sensitivity of 12% and 0.052%/Oe were achieved from pyrophosphate baths. The effect of plating conditions on properties of Co/Cu multilayers may be attributed to crystallinity and grain size of deposits, and the ability of plating solutions to deposit contiguous films at lower nano thicknesses.

• 한국진공학회지
• /
• 제15권1호
• /
• pp.110-116
• /
• 2006

본 연구에서는 나노 두께를 갖는 두 층을 반복적으로 증착하여 나노 다층 구조를 갖는 질화 물이 코팅된 절삭공구의 기계적 성능과 절삭성능의 향상에 대해 고찰하였다. 이러한 질화물계 나노 다층막에 대한 재료는 격자상수와 결정구조에 따라 $Ti_{0.54}Al_{0.46}N-CrN$계와 $Ti_{0.84}Al_{0.16}N-NlN$계를 선택하여, UBM sputtering 증착법을 이용하여 초경(WC-Co) 인서트(insert)위에 증착하였다. 공정 변수들인 증착온도, 압력. 기판 바이어스 전압, 기판회전 속도 등을 조절하여 다른 주기 값을 갖는 일정한 두께의 다층막들을 증착 시켰고, 주기에 따른 초격자 형성, 경도 값과 절삭성능을 관찰하였다. 증착된 다층막들은 그 주기 값에 따라 경도 값이 다르게 나타났으며. 경도 값이 상대적으로 높았던 특정 주기의 다층막이 코팅된 절삭 공구의 경우, 기존의 상용화된 제품에 비해 frank wear로 비교한 절삭 성능이 $20\%$이상 향상됨을 관찰하였다

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.384-385
• /
• 2005

Monolayers of lipids on a water surface have attracted much interest as models of biological membranes, but also as precursors of multilayer systems promising many technical applications. Until now, many methodologies have been developed in order to gain a better understanding of the relationship between the structure and function of the monolayers. Maxwell displacement current (MDC) measurement has been employed to study the dielectric property of Langmuir-films. MDC flowing across monolayers is analyzed using a rod-like molecular model. It is revealed that the dielectric relaxation time $\tau$ of mono layers in the isotropic polar orientational phase is determined using a liner relationship between the monolayer compression speed a and the molecular area $A_m$. Compression speed a was about 30, 40, 50mm/min. also, LB layers of Arachidic acid deposited by LB method were deposited onto slide glass as Y-type film. The structure of manufactured device is Au/Arachidic acid/Al, the number of accumulated layers are 9 ~ 21 and we then examined of the Metal-Insulator-Metal(MIM) device by means of I-V.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.278.1-278.1
• /
• 2013

Among the prerequisites for stable neural interfacing are the long-term stability of electrical performance of and the excellent biocompatibility of conducting materials in implantable neural electrodes. Reduced graphene oxide offers a great potential for a variety of biomedical applications including biosensors and, particularly, neural interfaces due to its superb material properties such as high electrical conductivity, decent optical transparency, facile processibility, and etc. Nonetheless, there have been few systematic studies on the graphene-based neural interfaces in terms of biocompatibility of electrode materials and long term stability in electrical characteristics. In this research, we prepared the primary culture of rat hippocampal neurons directly on reduced graphene oxide films which is chosen as a model electrode material for the neural electrode. We observed that the viability of primary neuronal culture on the present structure is minimally affected by nanoscale graphene flakes below. These results implicate that the multilayer films of reduced graphene oxides can be utilized for the next-generation neural interfaces with decent biocompatibility and outstanding electrical performance.