• Advanced Composite Materials
• /
• 제17권2호
• /
• pp.101-110
• /
• 2008

Metal nanohoneycomb structures were fabricated by E-beam evaporation and a two-step anodization process in phosphoric acid. Their tribological properties of adhesion and friction were investigated by AFM in relation to the pore size of the nanohoneycomb structures. Variations of the adhesive force are not found with pore size, but formation of the pore greatly reduces the adhesive force compared to the absence of pore structure. The coefficient of friction increased nonlinearly with pore size, due to surface undulation around the pore. Tribological properties do not differ greatly between the original nanohoneycomb structure and the metal nanohoneycomb structure.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.129-132
• /
• 2005

This study analyzes the behavior of adhesion and friction according to the pore size of nanohoneycomb structures in atomic force microscope (AFM). Anodic aluminum oxide (AAO) films are fabricated as nanohoneycomb structures. According to the pore diameters of the nanohoneycomb structures, the adhesive forces and the frictional coefficients arc obtained in AFM, and the behaviors are analyzed in the view of the contact area between the sphere particle and nanohoneycomb substrate. The effective Young's moduli of the nanohoneycomb structures are measured from the nanoindentation tests, and the contact areas at zero applied load are calculated by combining the porosity of the nanohoneycomb structures and the contact radius determined from JKR and DMT theory.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.265-268
• /
• 2005

A new method for measurement of the pore size in a nanohoneycomb structure using atomic force microscopy (AFM) was proposed. Porous type anodic aluminum oxide (AAO) was fabricated as a nanohoneycomb structure to measure the pore size. For measuring pore sizes from AFM images, a criterion was set in porous type AAO. The pore sizes from AFM images were compared with those from SEM images, and the results showed good agreement. The relationship between the pore size and widening time was found to be linear in the range of this study. It was understood as the synchronized effects of the impurity gradient in outer oxide of AAO, mechanical packing and mass transfer increase.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1837-1841
• /
• 2008

The purpose of this study is to investigate the properties of the AAO nanohoneycomb structure. Especially the Elastic modulus and hardness play important role in determining the mechanical deformation of ceramic materials. The mechanical properties of the AAO nanononeycomb structure were investigated using indentation test.

• Composites Research
• /
• 제19권6호
• /
• pp.23-31
• /
• 2006

나노허니컴 구조물의 영률, 굽힘 탄성 계수. 공칭파괴강도를 구하였다. 양극산화 알루미늄은 잘 정렬된 나노허니컴 구조물의 일종으로서 공정이 간단하고, 높은 종횡비, 자가 정렬된 기공구조를 가지고 있고, 기공의 크기를 조절할 수 있다. 원자현미경으로 외팔보 굽힘 시험을 수행하였고 나노-UTM을 이용한 3점 굽힘 실험결과와 비교하였다. 또한 나노-UTM으로 인장시험을 수행하였다. 나노허니컴 구조물의 한쪽 면은 막혀 있어서, 일반적인 샌드위치 구조물의 면재에 비유될 수 있다. 하지만 이러한 막힌 면은 굽힘 강도 증가에 영향을 끼치지 못하고 균열선단으로 작용한다는 것을 알 수 있었다. 본 연구로 나노허니컴 구조물을 설계하는데 기초적인 물성을 제공하고자 한다.

• Composites Research
• /
• 제20권2호
• /
• pp.17-20
• /
• 2007

Oxalic acid를 이용한 양극산화기법과 테플론 담금법을 이용하여 극소수성 나노/마이크로 구조물을 복제하였다. 이때 nanoscale hole의 사이즈는 양극산화시의 전압과 양극산화시간에 의해 결정된다. nanoscale에서 분자들 사이에 영향을 미치는 Van der Waals interactions에 의해서 복제 중 polymer sticking 현상이 발생한다. 이는 복제된 나노 구조물들이 서로 들러붙고 구부러지고 침강시키는 작용을 하게 된다. 이러한 현상이 microstructures위에 nanostructures가 존재하는 hierarchical structure가 생성되게 하며, 이러한 구조물은 연꽃잎의 미세구조물과 유사한 특성을 보인다. 즉 제작된 극소수성 나노/마이크로 구조물 표면은 접촉각이 $160^{\circ}{\sim}170^{\circ}$정도로 나타내고 또한 $1^{\circ}$미만의 sliding angle을 나타낸다.